UNS S15500 Washers, Precipitation Hardening SS 15-5PH Washers, AISI SS 15-5PH Stainless Steel 17-7PH Washers Supplier, Manufacturer and Exporter in India
Din 1.4545 SS 15-5PH Washers, SS UNS S15500 Washers, Precipitation Hardening Stainless Steel 17-7PH Washers, Precipitation Hardening Stainless Steel 15-5PH Washers Suppliers in India.
Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.
The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.
UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
HEAT TREATED 15-5PH STAINLESS STEEL
Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Sheet and Plate
- AMS 5862
- BMS 7-240
- Bar/Forging
- AMS 5659
- ASTM-A-484
- ASTM-A-564
15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.
Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.
Industries that use 15500 include:
- Aerospace
- Chemical
- Food processing
- General metal working
- Paper industries
- Petrochemical
Products partially or completely constructed of 15500 include:
- Aircraft components
- Cylinders
- Engine parts
- Fittings
- Gears
- Hallow shafts
- Marine gas turbine compressor sections
- Paper mill equipment
- Shafts
- Valves
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
|---|---|---|---|---|---|---|---|
| 15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.
The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.
UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
HEAT TREATED 15-5PH STAINLESS STEEL
Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Sheet and Plate
- AMS 5862
- BMS 7-240
- Bar/Forging
- AMS 5659
- ASTM-A-484
- ASTM-A-564
15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.
Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.
Industries that use 15500 include:
- Aerospace
- Chemical
- Food processing
- General metal working
- Paper industries
- Petrochemical
Products partially or completely constructed of 15500 include:
- Aircraft components
- Cylinders
- Engine parts
- Fittings
- Gears
- Hallow shafts
- Marine gas turbine compressor sections
- Paper mill equipment
- Shafts
- Valves
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
|---|---|---|---|---|---|---|---|
| 15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
STAINLESS STEEL
Grades 18-8, 303, 304, 304L, 316, 316L, 309, 310, 317L, 321, 330, 347, 410, 420, 430, 17-7PH
BOLTS AND SCREWS
ANSI/ASME B18.2.1, B18.3, B18.5, B18.6.2 ASTM A193, A320, F593, F837, F879, F880
HEX HEAD CAP SCREWS, HEAVY HEX BOLTS, T-HEAD BOLTS, LAG SCREWS
CARRIAGE BOLTS, ELEVATOR BOLTS, WEDGE ANCHOR BOLTS
SOCKET SCREWS: SOCKET CAP, FLAT AND BUTTON HEAD, SHOULDER SCREWS, SET SCREWS
MACHINE AND TAPPING SCREWS
ANSI/ASME B18.6.1, B18.6.3, B18.6.4MACHINE, SHEET METAL, THREAD CUTTING, SELF-DRILLING
NUTS
ANSI/ASME B18.2.2, B18.17, ASTM A194, F594, IFI 128
JAM, FINISHED, HEAVY, COUPLING, WING, NYLON INSERT, SERRATED FLANGE,
SLOTTED (CASTLE), ACORN (CAP), KEPS
WASHERS
ANSI/ASME B18.21.1, B18.22.1, B18.23.1
FLAT, LOCK, BEVELED, EXTERNAL AND INTERNAL TOOTH, COMPRESSION, SAE
THREADED ROD
ASTM A193, A320, F593, IFI 136
3-6-12 FOOT LENGTHS
STUDS: GENERAL PURPOSE, STUD BOLTS, DOUBLE END, SINGLE END
TURNBUCKLES
BENT BOLTS AND EYE BOLTS
ANSI/ASME B18.15, IFI 136
J-BOLTS, HOOK BOLTS, CLOSED AND OPEN EYE BOLTS, FORGED EYE BOLTS
HINGES, NAILS, PINS AND CHAINS
PIPE SUPPORTS, CLAMPS AND STRAPS
MSS-SP58, SP69, FIGURE 137
U-BOLTS, CLEVIS HANGERS, RISER CLAMPS, BEAM CLAMPS, 3-BOLT CLAMPS, SHORT STRAPS
Titanium |
|||||
|---|---|---|---|---|---|
| Grade | Common Name | Related Specification | |||
| British | European | ASTM | UNS | ||
| Grade1 | 3.7025 | B348 | R50250 | ||
| Grade2 | 3.7035 | B348 | R50400 | ||
| Grade3 | 3.7055 | B348 | R50550 | ||
| Grade5 | 3.7165 | B345 | R56400 | ||
| Grade7 | 3.7235 | B348 | R52400 | ||
| Grade11 | 3.2250 | B348 | R52250 | ||
Titanium fasteners are among the most commonly manufactured at Harsh Steel. Often known for its light weight, titanium also possesses excellent mechanical properties, able to resist hostile environments, and is used commonly in offshore engineering projects.
Duplex |
||||
|---|---|---|---|---|
| Alloy | Common Name | Related Specifications | ||
| European | UNS | ASTM/ASME | ||
| Alloy 2205 | SAF 2205 ® | 1.4462 | S32205 | F60 |
| 31803 | 31803 | 1.4462 | S31803 | F51 |
Harsh Steel produces duplex fasteners in all grades of duplex, to customer specification. Duplex grades are a mixed microstructure of Austenite and Ferrite, combining the properties of both (hence the name DUPLEX). Duplex stainless steels have high corrosion resistance as well as a high strength. Mechanical properties are around double that of a typical austenitic grade such as 316. They would also normally offer higher stress cracking resistance in Chloride solutions for example. They are composed typically of 22% Chromium, 5 % nickel. Having worked with duplex since its outset, the duplex bolting continues to account for a core part of our business, along with Super duplex.
Super Duplex | ||||
|---|---|---|---|---|
| Alloy | Common Name | Related Specification | ||
| European | UNS | ASTM/ASME | ||
| Alloy 255 | Ferralium 255 ® | 1.4507 | S32550 | F61 |
| Zeron 100 | Zeron 100 ® | 1.4501 | S32760 | F55 |
| Alloy 2507 | SAF 2507 ® | 1.4410 | S32750 | F53 |
We are proud that Harsh Steel is the world’s number one bespoke producer of Super Duplex bolting. Super Duplex stainless steel grades are similar to standard duplex, but they contain a higher content of Chromium, thus enhancing the corrosion resistance and mechanical properties. Harsh Steel produces fasteners in all three types of Super Duplex.
Stainless Steels / Others |
||||
|---|---|---|---|---|
| Grade | Related Specification | |||
| British | European | ASTM | UNS | |
| 304/304L | BS 970 | 1.4301/1.4306 | A193 B8, A320 B8 | S 30400 / S30403 |
| 310 | BS 970 | 1.4841 | A479 | S 31000 S 31008 |
| 310S | BS 970 | 1.4845 | S 31008 | |
| 316/316L | BS 970 | 1.4401 | A193 B8M, A320 B8M | S 31600 / S31603 |
| 317/317L | BS 970 | 1.4449/1.4438 | S 31700 / S31703 | |
| 321 | BS 970 | 1.4541 | A193 B8T | S 32100 |
| 347 | BS 970 | 1.4550 | A193 B8C, A320 B8C | S 34700 |
| 410 | BS 970 | 1.4006 | S 41000 | |
| 431 | BS 970 | 1.4057 | S 43100 | |
| 174PH | 1.4562 | S 14700 | ||
| 660 A/B/C/D | 1.4980 | A453 | K 66286 | |
| 254 SMO ® | 1.4547 | S 31254 | ||
| C63000 | B150 | C63000 | ||
| 904L | 1.4539 | N08904 | ||
| Zirconium 702 | R60702 | |||
| Zirconium 705 | R60705 | |||
Harsh Steel started off producing Stainless Steel bolting in its formative years, and although the company has since diversified into more exotic materials, we continue to offer Stainless Steels and they continue to be an important part of our business, especially if customers require non-standard bolting: i.e. non-standard sizes, special specification, or otherwise difficult to find. We offer all grades of stainless steels, be it Austenitic, Ferritic or Martensitic.
High Nickel Alloys |
|||||
|---|---|---|---|---|---|
| Alloy | Common Name | Related Specification | |||
| British | European | ASTM | UNS | ||
| Alloy 600 | Inconel 600 ® | BS 3076 NA 14 | 2.4816 | B166 | N06600 |
| Alloy 601 | Inconel 601 ® | 2.4627 | B166 | N06601 | |
| Alloy 625 | Inconel 625 ® | BS 3076 NA 21 | 2.4856 | B446 | N06625 |
| Alloy 718 | Inconel 718 ® | 1.4668 | B637 | N07718 | |
| Alloy 750 | Inconel 750 ® | 2.4669 | B637 | N07750 | |
| Alloy 400 | Monel 400 ® | BS 3076 NA13 | 2.4360 | F467 | N04400 |
| Alloy K500 | Monel K500 ® | BS 3076 NA18 | 4.4375 | B865-04 | N05500 |
| Alloy C276 | Hastelloy C276 ® | 2.4819 | B574 | N10276 | |
| Alloy 22 | Hastelloy C22 ® | 2.4602 | B574 | N06022 | |
| Alloy B2 | Hastelloy B2 ® | B335 | N10665 | ||
| Alloy X | Hastelloy X ® | 2.4655 | B572 | N06002 | |
| Alloy B3 | Hastelloy B3 ® | 2.4600 | B335 | N10675 | |
| Alloy G30 | Hastelloy G30 ® | 2.4603 | B581 | N06030 | |
| Alloy 50 | Nitronic 50 ® | A479 XM-19 | S20910 | ||
| Alloy 60 | Nitronic 60 ® | A193 B8S | S21800 | ||
| Alloy 75 | Nimonic 75 ® | 2.4951 | B637 | N06075 | |
| Alloy 80A | Nimonic 80A ® | BS 4882 NA20 | 2.4952 | B637 | N07080 |
| Alloy 90 | Nimonic 90 ® | B408 | N07090 | ||
| Alloy 800 | Incoloy 800 ® | BS 3076 NA15 | 1.4876 | B408 | N08800 |
| Alloy 800H | Incoloy 800H ® | B408 | |||
| Alloy 800 HT | Incoloy 800HT ® | 1.4959 | B408 | N08811 | |
| Alloy 825 | Incoloy 825 ® | BS 3076 NA16 | 2.4858 | B425 | N08825 |
| Alloy 925 | Incoloy 925 ® | B805 | N09925 | ||
| Alloy DS | Incoloy DS ® | BS 3076 NA17 | 1.4862 | N08330 | |
Harsh Steel’s substantial experience in working with high nickel alloys bolting is crucial as they are extremely difficult materials to machine and can require various forms of additional treatment to ensure full conformity. Related by their high percentage of nickel in their composition, these highly corrosion-resistant materials are widely used in the petrochemical and offshore sector, and are often better known by their registered trade names (e.g. Inconel®, Hastelloy®, Monel® and Nimonic®).
INCONEL BOLTS
We produce inconel fasteners in several grades. Inconels are austenitic nickel-chromium superalloys. They are used in extreme environments, often in gas turbines, nuclear reactors and natural gas processing plants.
HASTELLOY BOLTS
Hastelloy bolts & nuts can be most effective under high temperatures and corrosive environments, with high stress resistance.
MONEL BOlTING
HARSH STEEL manufactures Monel fasteners in A400 and K500. Monel grades are nickel-copper based alloys and have high corrosion resistance and strength properties. They are often used in valves, pumps and heat exchangers.
INCOLOY BOLTS
HARSH STEEL produces various grades of Incoloy bolts & nuts. Another of the superalloys, it is used in extreme environments.
NITRONIC BOLTS
Nitronic grade fasteners have excellent corrosion resistance properties and strength. It has low magnetic permeability and excellent cryogenic properties.
Harsh Steel has released it own special Super Duplex Fastener Specification Our range of fasteners are manufactured using quality material that are known for high tensile strength and durability. These industrial fasteners are offered with Manufacturer Test Certificate as per EN 10204 / 3.1B. We offer industrial fasteners in different grades such as industrial washers, industrial screws, stainless washers and stainless screws. Available in different sizes, our range of fasteners can be customized as per the specifications of our clients.
Stainless Steel Fasteners
Harsh Steel is amongst the leading manufacturers of quality Stainless Steel Fasteners. These industrial stainless steel fasteners are made using top grade rust resistant steel to provide long life service. Widely used in different industries like defense industry, shipbuilding industry, chemical industry, fertilizer industry, petrochemical industry, refineries and steel plant, these industrial stainless steel fasteners are available in various grades and sizes as per the requirements of our clients.
Specifications
- Standard : ASTM / ASME A/SA 193 / 194
- Grade : B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
Form
- Bolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts
- Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab
- Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts
- Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws
- Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.
We export our PRECIPITATION HARDENING STAINLESS STEEL 15-5PH WASHERS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
