UNS S30453 Bolts, SS 309 Bolts, AISI SS 309S Stainless Steel 309 Bolts Supplier, Manufacturer and Exporter in India
Din 1.4311 SS 309 Bolts, SS UNS S30453 Bolts, Stainless Steel 309 Bolts, 310 Stainless Steel 309 Bolts Suppliers in India.
STAINLESSS STEEL 304LN BOLTS INTRODUCTION:-
Stainless steel grade 304 is the most commonly used stainless steel. Stainless steel grade 304LN is a nitrogen-strengthened version of stainless steel grade 304.
The following datasheet provides an overview of grade 304LN stainless steel.
STAINLESSS STEEL 304LN BOLTS APPLICATION:
- Heat exchangers
- Chemical industry
- Food industry
- Petroleum industry
- Fabrication industry
- Nuclear industry
STAINLESSS STEEL 304LN BOLTS CHEMICAL COMPOSITION:
The chemical composition of grade 304LN stainless steel is outlined in the following table.
Element | Content (%) |
---|---|
Chromium, Cr | 18-20 |
Nickel, Ni | 8-12 |
Manganese, Mn | 2 max |
Silicon, Si | 1 max |
Nitrogen, N | 0.1-0.16 |
Phosphorous, P | 0.045 max |
Carbon, C | 0.03 max |
Sulfur, S | 0.03 max |
Iron, Fe | Remainder |
STAINLESSS STEEL 304LN BOLTS MECHANICAL PROPERTIES:
The mechanical properties of grade 304LN stainless steel are displayed in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 515 MPa | 74694 psi |
Yield strength | 205 MPa | 29732 psi |
Elongation at break (in 50 mm) | 40% | 40% |
Hardness, Brinell | 217 | 217 |
Hardness, Rockwell B | 95 | 95 |
STAINLESSS STEEL 304LN BOLTS OTHER DESIGNATION:
Equivalent materials to grade 304LN stainless steel are given below.
ASTM A182 | ASTM A213 | ASTM A269 | ASTM A312 | ASTM A376 |
ASTM A240 | ASTM A249 | ASTM A276 | ASTM A336 | ASTM A403 |
ASTM A193 (B8LN, B8LNA) | ASTM A194 (8LN, 8LNA) | ASTM A320 (B8LN, B8LNA) | ASTM A479 | ASTM A666 |
ASTM A688 | ASTM A813 | ASTM A814 | DIN 1.4311 |
STAINLESS STEEL GRADES:
Grades 18-8, 303, 304, 304L, 316, 316L, 309, 310, 317L, 321, 330, 347, 410, 420, 430, 17-7PH
STAINLESSS STEEL 304LN BOLTS AND SCREWS
ANSI/ASME B18.2.1, B18.3, B18.5, B18.6.2 ASTM A193, A320, F593, F837, F879, F880
HEX HEAD CAP SCREWS, HEAVY HEX BOLTS, T-HEAD BOLTS, LAG SCREWS
CARRIAGE BOLTS, ELEVATOR BOLTS, WEDGE ANCHOR BOLTS
SOCKET SCREWS: SOCKET CAP, FLAT AND BUTTON HEAD, SHOULDER SCREWS, SET SCREWS
STAINLESSS STEEL 304LN MACHINE AND TAPPING SCREWS:
ANSI/ASME B18.6.1, B18.6.3, B18.6.4MACHINE, SHEET METAL, THREAD CUTTING, SELF-DRILLING
STAINLESSS STEEL 304LN NUTS:
ANSI/ASME B18.2.2, B18.17, ASTM A194, F594, IFI 128
JAM, FINISHED, HEAVY, COUPLING, WING, NYLON INSERT, SERRATED FLANGE,
SLOTTED (CASTLE), ACORN (CAP), KEPS
STAINLESSS STEEL 304LN WASHERS:
ANSI/ASME B18.21.1, B18.22.1, B18.23.1
FLAT, LOCK, BEVELED, EXTERNAL AND INTERNAL TOOTH, COMPRESSION, SAE
STAINLESSS STEEL 304LN THREADED ROD:
ASTM A193, A320, F593, IFI 136
3-6-12 FOOT LENGTHS
STUDS: GENERAL PURPOSE, STUD BOLTS, DOUBLE END, SINGLE END
STAINLESSS STEEL 304LN TURNBUCKLES:
BENT BOLTS AND EYE BOLTS
ANSI/ASME B18.15, IFI 136
J-BOLTS, HOOK BOLTS, CLOSED AND OPEN EYE BOLTS, FORGED EYE BOLTS
STAINLESSS STEEL 304LN HINGES, NAILS, PINS AND CHAINS
PIPE SUPPORTS, CLAMPS AND STRAPS
MSS-SP58, SP69, FIGURE 137
U-BOLTS, CLEVIS HANGERS, RISER CLAMPS, BEAM CLAMPS, 3-BOLT CLAMPS, SHORT STRAPS
Titanium fasteners are among the most commonly manufactured at Harsh Steel. Often known for its light weight, titanium also possesses excellent mechanical properties, able to resist hostile environments, and is used commonly in offshore engineering projects.
Titanium |
|||||
---|---|---|---|---|---|
Grade | Common Name | Related Specification | |||
British | European | ASTM | UNS | ||
Grade1 | 3.7025 | B348 | R50250 | ||
Grade2 | 3.7035 | B348 | R50400 | ||
Grade3 | 3.7055 | B348 | R50550 | ||
Grade5 | 3.7165 | B345 | R56400 | ||
Grade7 | 3.7235 | B348 | R52400 | ||
Grade11 | 3.2250 | B348 | R52250 |
Harsh Steel produces duplex fasteners in all grades of duplex, to customer specification. Duplex grades are a mixed microstructure of Austenite and Ferrite, combining the properties of both (hence the name DUPLEX). Duplex stainless steels have high corrosion resistance as well as a high strength. Mechanical properties are around double that of a typical austenitic grade such as 316. They would also normally offer higher stress cracking resistance in Chloride solutions for example. They are composed typically of 22% Chromium, 5 % nickel. Having worked with duplex since its outset, the duplex bolting continues to account for a core part of our business, along with Super duplex.
Duplex |
||||
---|---|---|---|---|
Alloy | Common Name | Related Specifications | ||
European | UNS | ASTM/ASME | ||
Alloy 2205 | SAF 2205 ® | 1.4462 | S32205 | F60 |
31803 | 31803 | 1.4462 | S31803 | F51 |
We are proud that Harsh Steel is the world’s number one bespoke producer of Super Duplex bolting. Super Duplex stainless steel grades are similar to standard duplex, but they contain a higher content of Chromium, thus enhancing the corrosion resistance and mechanical properties. Harsh Steel produces fasteners in all three types of Super Duplex.
Super Duplex | ||||
---|---|---|---|---|
Alloy | Common Name | Related Specification | ||
European | UNS | ASTM/ASME | ||
Alloy 255 | Ferralium 255 ® | 1.4507 | S32550 | F61 |
Zeron 100 | Zeron 100 ® | 1.4501 | S32760 | F55 |
Alloy 2507 | SAF 2507 ® | 1.4410 | S32750 | F53 |
Harsh Steel started off producing Stainless Steel bolting in its formative years, and although the company has since diversified into more exotic materials, we continue to offer Stainless Steels and they continue to be an important part of our business, especially if customers require non-standard bolting: i.e. non-standard sizes, special specification, or otherwise difficult to find. We offer all grades of stainless steels, be it Austenitic, Ferritic or Martensitic.
Stainless Steels / Others |
||||
---|---|---|---|---|
Grade | Related Specification | |||
British | European | ASTM | UNS | |
304/304L | BS 970 | 1.4301/1.4306 | A193 B8, A320 B8 | S 30400 / S30403 |
310 | BS 970 | 1.4841 | A479 | S 31000 S 31008 |
310S | BS 970 | 1.4845 | S 31008 | |
316/316L | BS 970 | 1.4401 | A193 B8M, A320 B8M | S 31600 / S31603 |
317/317L | BS 970 | 1.4449/1.4438 | S 31700 / S31703 | |
321 | BS 970 | 1.4541 | A193 B8T | S 32100 |
347 | BS 970 | 1.4550 | A193 B8C, A320 B8C | S 34700 |
410 | BS 970 | 1.4006 | S 41000 | |
431 | BS 970 | 1.4057 | S 43100 | |
174PH | 1.4562 | S 14700 | ||
660 A/B/C/D | 1.4980 | A453 | K 66286 | |
254 SMO ® | 1.4547 | S 31254 | ||
C63000 | B150 | C63000 | ||
904L | 1.4539 | N08904 | ||
Zirconium 702 | R60702 | |||
Zirconium 705 | R60705 |
Harsh Steel’s substantial experience in working with high nickel alloys bolting is crucial as they are extremely difficult materials to machine and can require various forms of additional treatment to ensure full conformity. Related by their high percentage of nickel in their composition, these highly corrosion-resistant materials are widely used in the petrochemical and offshore sector, and are often better known by their registered trade names (e.g. Inconel®, Hastelloy®, Monel® and Nimonic®).
High Nickel Alloys |
|||||
---|---|---|---|---|---|
Alloy | Common Name | Related Specification | |||
British | European | ASTM | UNS | ||
Alloy 600 | Inconel 600 ® | BS 3076 NA 14 | 2.4816 | B166 | N06600 |
Alloy 601 | Inconel 601 ® | 2.4627 | B166 | N06601 | |
Alloy 625 | Inconel 625 ® | BS 3076 NA 21 | 2.4856 | B446 | N06625 |
Alloy 718 | Inconel 718 ® | 1.4668 | B637 | N07718 | |
Alloy 750 | Inconel 750 ® | 2.4669 | B637 | N07750 | |
Alloy 400 | Monel 400 ® | BS 3076 NA13 | 2.4360 | F467 | N04400 |
Alloy K500 | Monel K500 ® | BS 3076 NA18 | 4.4375 | B865-04 | N05500 |
Alloy C276 | Hastelloy C276 ® | 2.4819 | B574 | N10276 | |
Alloy 22 | Hastelloy C22 ® | 2.4602 | B574 | N06022 | |
Alloy B2 | Hastelloy B2 ® | B335 | N10665 | ||
Alloy X | Hastelloy X ® | 2.4655 | B572 | N06002 | |
Alloy B3 | Hastelloy B3 ® | 2.4600 | B335 | N10675 | |
Alloy G30 | Hastelloy G30 ® | 2.4603 | B581 | N06030 | |
Alloy 50 | Nitronic 50 ® | A479 XM-19 | S20910 | ||
Alloy 60 | Nitronic 60 ® | A193 B8S | S21800 | ||
Alloy 75 | Nimonic 75 ® | 2.4951 | B637 | N06075 | |
Alloy 80A | Nimonic 80A ® | BS 4882 NA20 | 2.4952 | B637 | N07080 |
Alloy 90 | Nimonic 90 ® | B408 | N07090 | ||
Alloy 800 | Incoloy 800 ® | BS 3076 NA15 | 1.4876 | B408 | N08800 |
Alloy 800H | Incoloy 800H ® | B408 | |||
Alloy 800 HT | Incoloy 800HT ® | 1.4959 | B408 | N08811 | |
Alloy 825 | Incoloy 825 ® | BS 3076 NA16 | 2.4858 | B425 | N08825 |
Alloy 925 | Incoloy 925 ® | B805 | N09925 | ||
Alloy DS | Incoloy DS ® | BS 3076 NA17 | 1.4862 | N08330 |
STAINLESSS STEEL 304LN INCONEL BOLTS:
We produce inconel fasteners in several grades. Inconels are austenitic nickel-chromium superalloys. They are used in extreme environments, often in gas turbines, nuclear reactors and natural gas processing plants.
STAINLESSS STEEL 304LN HASTELLOY BOLTS
Hastelloy bolts & nuts can be most effective under high temperatures and corrosive environments, with high stress resistance.
STAINLESSS STEEL 304LN MONEL BOLTING:
HARSH STEEL manufactures Monel fasteners in A400 and K500. Monel grades are nickel-copper based alloys and have high corrosion resistance and strength properties. They are often used in valves, pumps and heat exchangers.
STAINLESSS STEEL 304LN INCOLOY BOLTS
HARSH STEEL produces various grades of Incoloy bolts & nuts. Another of the superalloys, it is used in extreme environments.
STAINLESSS STEEL 304LN NITRONIC BOLTS:
Nitronic grade fasteners have excellent corrosion resistance properties and strength. It has low magnetic permeability and excellent cryogenic properties.
Harsh Steel has released it own special Super Duplex Fastener Specification Our range of fasteners are manufactured using quality material that are known for high tensile strength and durability. These industrial fasteners are offered with Manufacturer Test Certificate as per EN 10204 / 3.1B. We offer industrial fasteners in different grades such as industrial washers, industrial screws, stainless washers and stainless screws. Available in different sizes, our range of fasteners can be customized as per the specifications of our clients.
STAINLESSS STEEL 304LN FASTENERS:
Harsh Steel is amongst the leading manufacturers of quality Stainless Steel Fasteners. These industrial stainless steel fasteners are made using top grade rust resistant steel to provide long life service. Widely used in different industries like defense industry, shipbuilding industry, chemical industry, fertilizer industry, petrochemical industry, refineries and steel plant, these industrial stainless steel fasteners are available in various grades and sizes as per the requirements of our clients.
STAINLESSS STEEL 304LN SPECIFICATIONS:
- Standard : ASTM / ASME A/SA 193 / 194
- Grade : B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
STAINLESSS STEEL 304LN FORM:
- Bolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts
- Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab
- Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts
- Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws
- Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.
We export our STAINLESS STEEL 304LN BOLTS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.