Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S17700 CNC Components, SS 17-7PH CNC Components, AISI SS 17-7PH Stainless Steel 17-7PH CNC Components Supplier, Manufacturer and Exporter in India


Din 1.4568 SS 17-7PH CNC Components, SS UNS S17700 CNC Components, Stainless Steel 17-7PH CNC Components, 17-7PH Stainless Steel 17-7PH CNC Components Suppliers in India.

PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS GENERAL PROPERTIES:

Stainless Grade 17-7 PH is a precipitation hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. The alloy provides valuable property combinations particularly well suited for aerospace applications. This special alloy also provides benefits for other applications requiring high strength and good corrosion resistance, as well as excellent properties for flat springs at temperatures up to 600°F (316°C).


PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS APPLICATIONS:

  • applications requiring good strength, corrosion resistance and mechanical properties up to 800 F in service.
  • used for very detailed, intricate parts due to its low distortion in heat treatment.
  • commonly found in a variety of springs and washers.

PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS CORROSION RESISTANCE:

Corrosion resistance of Type 17-7PH stainless steel in all heat treated conditions, like other types of stainless steels – will develop superficial rust in some environments. For example, in a marine atmosphere, stainless steels show evidence of rusting after relatively short exposure periods. However, after exposure of one or two years, the amount of rust present is little more than that present at six months. As with all martensitic steels, 17-7PH stainless steel may be subject to cracking when exposed under stress in environments containing hydrogen sulfide. Such applications are not recommended.


PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS FORMABILITY:

In Condition A, the alloy can be formed comparably to Type 301. It work hardens rapidly and may require intermediate annealing in deep drawing or in forming intricate parts. Springback is similar to that of Type 301. This alloy is extremely hard and strong in Condition C. Therefore, fabrication techniques for such material must be used.


PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS WELDABILITY:

The precipitation hardening class of stainless steel is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to achieve optimum mechanical properties by considering the best heat-treated conditions in which to weld and which heat treatments should follow welding. This particular alloy is generally considered to have poorer weldability compared to the most common alloy of this stainless class, 17-4 PH stainless steel. A major difference is the high Al content of this alloy, which degrades penetration and enhances weld slag formation during arc welding. Also, the austenite conditioning and precipitation hardening heat treatments are both required after welding to achieve high strength levels. When a weld filler is needed, 17-7 PH is most often specified.


PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS CHEMICAL PROPERTIES:

TYPE Cr Ni Al C Mn P S Si
17-7 min: 16.0
max: 18.0
min: 6.75
max: 7.75
min: 0.75
max: 1.50
0.09
max
1.00
max
0.05
max
0.03
max
1.00
max

PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) Yield Strength 0.2% ksi (min) Elongation % Hardness (Rockwell) MAX
17-7 130 40 35 B85

PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS PHYSICAL PROPERTIES:

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.2820 117 —- 30.7 at 68°F 28.5 8.5 at 32 – 212°F 0.1200 at 68°F to 212°F 2560-2625°F
Description: Valve related cnc products and vmc components
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Spool CNC components
Material: Stainless steel  202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Medical Implants, Bone screw, pedicle screws, pins, plates and other implants Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Plugs and Exotic Fasteners with unique designs and sizes
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements and all types of coating available
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Shaft and pins
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description:  Precision CNC and VMC sheet metal components, Top Rollers, Spray nozzles, Instrumentation fittings  as per drawings
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Aerospace parts such as adapters, flanges, knobs, couplings, fittings, ferrules, brackets, clamps, connectors, hoses, Elbows, Tees, shafts, Nipples, Hex plugs etc
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Industrial Precision CNC and VMC components for motorsports, automotives, bicycle components, energy and power, oil and gas equipments etc.
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.

We export our PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
PRECIPITATION HARDENING STAINLESS STEEL 17-7PH CNC COMPONENTS
Author Rating
5starstarstarstarstar