Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S30100 CNC Components, SS 301 CNC Components, AISI SS 301 Stainless Steel 301 CNC Components Supplier, Manufacturer and Exporter in India


Din 1.4310 SS 301 CNC Components, SS UNS S30100 CNC Components, Stainless Steel 301 CNC Components, 301 Stainless Steel 301 CNC Components Suppliers in India.

STAINLESS STEEL 301 CNC COMPONENTS GENERAL PROPERTIES:

Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, and full hard.


STAINLESS STEEL 301 CNC COMPONENTS APPLICATIONS:

High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include:

  • aircraft structural parts
  • trailer bodies
  • utensils
  • architectural and automotive rim
  • roof drainage products
  • conveyor belts
  • variety of industrial applications.

STAINLESS STEEL 301 CNC COMPONENTS CORROSION RESISTANCE:

  • Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures.
  • Resists outdoor, industrial, marine, and mild chemical environments
  • susceptible to carbide precipitation during welding, which restricts its use in some applications
  • Similar to resistance of Stainless Steel grade 304

STAINLESS STEEL 301 CNC COMPONENTS HEAT RESISTANCE:

  • Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C).
  • Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
  • Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C).


STAINLESS STEEL 301 CNC COMPONENTS HEAT TREATMENT:

  • Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly.
  • Use low side of range for intermediate annealing.
  • This grade cannot be hardened by thermal treatment.


STAINLESS STEEL 301 CNC COMPONENTS COLD WORKING:

  • hardens at high rate, creating a very high strength from cold rolling and from roll forming.
  • more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
  • strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process.
  • severe cold deformation can still occur, due to residual ductility.
  • Grade 301 becomes strongly magnetic when cold rolled.


STAINLESS STEEL 301 CNC COMPONENTS WELDING:

  • must be annealed for maximum corrosion resistance
  • more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
  • must be annealed for maximum corrosion resistance
  • Welding and post weld annealing will both remove high strength induced by prior cold rolling.
  • Spot welding is commonly used to assemble cold rolled 301 components..
  • material will lose temper in the heat affected weld zone.

STAINLESS STEEL 301 CNC COMPONENTS CHEMICAL PROPERTIES:

% Cr Ni C Si Mn P S N
301 Min: 16 6 - - - - - -
Max: 18 8 0.15 1.00 2.0 0.045 0.030 0.10

STAINLESS STEEL 301 CNC COMPONENTS MECHANICAL PROPERTIES:

Grade/Temper Tensile Strengthksi (min.) Yield Strength 0.2%ksi (min.) Elongation -% in 50 mm (min.)
301 1/4 125 75 25
301 1/2 150 110 18
301 Full Hard 185 140 9

STAINLESS STEEL 301 CNC COMPONENTS PHYSICAL PROPERTIES:

Denstiylbm/in3 Coefficient ofThermal Expansion (min/in)-°F Electrical Resistivity mW-in Thermal Conductivity BTU/hr-ft-°F MeltingRange
0.29 at 68 – 212°F at 68 – 932°F at 68 – 1450°F at 68°°F at 212°F at 392°F at 752°F at 1112°F at 1472°F at 68 – 212°F 2550-2590°F
9.2 10.4 10.9 28.3 30.7 33.8 39.4 43.7 47.6 9.4
Description: Valve related cnc products and vmc components
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Spool CNC components
Material: Stainless steel  202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per Diagram and requirement
Finish: As per requirement
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Medical Implants, Bone screw, pedicle screws, pins, plates and other implants Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Plugs and Exotic Fasteners with unique designs and sizes
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements and all types of coating available
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Shaft and pins
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description:  Precision CNC and VMC sheet metal components, Top Rollers, Spray nozzles, Instrumentation fittings  as per drawings
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s requirements
Finish: As per clients requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Aerospace parts such as adapters, flanges, knobs, couplings, fittings, ferrules, brackets, clamps, connectors, hoses, Elbows, Tees, shafts, Nipples, Hex plugs etc
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.
Description: Industrial Precision CNC and VMC components for motorsports, automotives, bicycle components, energy and power, oil and gas equipments etc.
Material: Stainless steel 202, 304/304L, 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410, Duplex 2205 and 2507. Nickel Alloy such as alloy 200/201, C276, C22, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and Titanium Grade 1, Grade 2, Grade 5 and all other grades in Copper alloys.
Size: As per client’s drawings and requirements
Finish: As per clients drawings and requirements
Process: CNC swiss, CNC turning, VMC machining, Milling and Grinding.

We export our STAINLESS STEEL 301 CNC COMPONENTS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 301 CNC COMPONENTS
Author Rating
5starstarstarstarstar