Stainless Steel 304 Coils, UNS S30400 Coils Supplier & Exporter

STAINLESS STEEL 304 COIL GENERAL PROPERTIES:

Alloy 304 a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 has a maximum carbon of 0.07% . It is the standard "18/8 stainless" that is commonly found in pans and cooking tools. Alloy 304 is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercial applications, Alloy 304 exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes.

STAINLESS STEEL 304 COIL APPLICATIONS:

Alloy 304 Stainless Steel is used in a wide variety of home and commercial applications, including:

• Kitchen benches, sinks, troughs, equipment, and appliances
• Chemical containers, including for transport
• Food processing equipment, particularly in beer brewing, milk processing, and wine making
• Heat exchangers
• Architectural trim and molding
• Woven or welded screens for mining, quarrying & water filtration
• Automotive and aerospace structural use
• Nuts, bolts, screws, and other fasteners in the marine environment
• Construction material in large buildings
• Dyeing industry

STAINLESS STEEL 304 COIL STANDARDS-ALLOY 303:

• ASTM/ASME: UNS S30400 / S30403
• EURONORM: 1.4301 / 1.4303
• AFNOR: Z5 CN 18.09 / Z2 CN 18.10
• DIN: X5 CrNi 18 10 / X2 CrNi 19 11

STAINLESS STEEL 304 COIL CORROSION RESISTANCE:

• Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.
• Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.
• The 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.

STAINLESS STEEL 304 COIL HEAT RESISTANCE:

• Good oxidation resistance at temperatures up to 1700°F (927 °C)
• Continuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.
• Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.

STAINLESS STEEL 304 COIL PROPERTIES OF 304 ALLOY:

STAINLESS STEEL 304 COIL WELDING CHARACTERISTICS:

Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:

• avoidance of cracking
• preservation of corrosion resistance

STAINLESS STEEL 304 COIL PROCESSING - HOT FORMING:

• To forge, heat uniformity to 2100 / 2300 °F
• Do not forge below 1700 °F
• Forging can be air cooled without danger of cracking

STAINLESS STEEL 304 COIL PROCESSING - COLD FORMING:

• Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.
• These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.

STAINLESS STEEL 304 COIL MACHINABILITY:

• The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.

Harsh steel Specializes in supplying stainless steel 304 custom slit thin gauges stainless steel coils and sheets. Our Inventory includes Company specializes in supplying custom-slit thin gauge stainless steel alloys in coil and sheet form. Our inventory includes Grades such as SS 201, SS 202, SS301, SS 304, SS 304L, SS 316, SS 316L, SS 310, SS 317, SS 347, SS 410 and SS 430. Also we supply duplex and super duplex coils. We supply, stock and export stainless steel coils thicknesses from .001" to .31" thick with slitting capabilities of widths as narrow as .020" up through 36".

• Stainless Steel 304 coils Thickness Range: - 0.025mm – 4.00mm
• Stainless Steel 304 coils Width: - Soft, Half Hard, Half Hard, ¾ Hard, Full Hard & Spring Hard
• Stainless Steel 304 coils Hardness: - Minimum 3.2mm to maximum 2000mm
• Stainless Steel 304 coils Finish: - 2B, 2D, Bright Annealed, #3 Polish, #4 Polish and more

STAINLESS STEEL COIL GRADES AVAILABLE:

• Stainless Steel coils available in following grades :
  304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201
• Nickel Alloy coils available in following grades :
  such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth.
• Duplex & Super Duplex coils available in following grades :
  S31803, S32750, S32760, S31500, S32205.

We export our STAINLESS STEEL 304 COILS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry