UNS S31700 Coils, SS 317 Coils, AISI SS 317 Stainless Steel 317 Coils Supplier, Manufacturer and Exporter in India
Din 1.4449 SS 317 Coils, SS UNS S31700 Coils, Stainless Steel 317 Coils, 317 Stainless Steel 317 Coils Suppliers in India.
STAINLESS STEEL 317 COIL GENERAL PROPERTIES:
317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
STAINLESS STEEL 317 COIL APPLICATIONS:
- Flue-gas desulfurization systems
- Chemical process vessels
- Petrochemical
- Pulp and Paper
- Condensers in power generation
STAINLESS STEEL 317 COIL CORROSION PROPERTIES:
317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
STAINLESS STEEL 317 COIL WELDING:
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.
STAINLESS STEEL COIL CHARACTERISTICS: -
- Improved general and localized corrosion to 316L stainless
- Good formability
- Good weldability
STAINLESS STEEL 317 COIL CHEMICAL PROPERTIES:
Ni |
Cr |
Mo |
Mn |
Si |
|---|---|---|---|---|
11.0 - 15.0 |
18.0 - 20.0 |
3.0 - 4.0 |
2.0 Max |
.75 Max |
C |
N |
S |
P |
Fe |
0.03 Max |
0.1 Max |
0.03 Max |
0.045 Max |
Balance |
STAINLESS STEEL 317 COIL MECHANICAL PROPERTIES:
| Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | Elongation Percent | Hardness Max. |
|---|---|---|---|
75 |
30 |
35 |
217 Brinell |
Harsh steel Specializes in supplying stainless steel 317 custom slit thin gauges stainless steel coils and sheets. Our Inventory includes Company specializes in supplying custom-slit thin gauge stainless steel alloys in coil and sheet form. Our inventory includes Grades such as SS 201, SS 202, SS301, SS 304, SS 304L, SS 316, SS 316L, SS 310, SS 317, SS 347, SS 410 and SS 430. Also we supply duplex and super duplex coils. We supply, stock and export stainless steel coils thicknesses from .001" to .31" thick with slitting capabilities of widths as narrow as .020" up through 36".
- Stainless Steel 317 Coils Thickness Range: - 0.025mm – 4.00mm
- Stainless Steel 317 Coils Width: - Soft, Half Hard, Half Hard, ¾ Hard, Full Hard & Spring Hard
- Stainless Steel 317 Coils Hardness: - Minimum 3.2mm to maximum 2000mm
- Stainless Steel 317 Coils Finish: - 2B, 2D, Bright Annealed, #3 Polish, #4 Polish and more
STAINLESS STEEL COIL GRADES AVAILABLE:
- Stainless Steel coils available in following grades :
304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201 - Nickel Alloy coils available in following grades :
such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth. - Duplex & Super Duplex coils available in following grades :
S31803, S32750, S32760, S31500, S32205.
We export our STAINLESS STEEL 317 COILS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
