UNS S15500 Sheets, Precipitation Hardening SS 15-5PH Plates, AISI SS 15-5PH Stainless Steel 17-7PH Sheets Supplier, Manufacturer and Exporter in India
Din 1.4545 SS 15-5PH Plates, SS UNS S15500 Sheets, Precipitation Hardening Stainless Steel 17-7PH Plates, Precipitation Hardening Stainless Steel 15-5PH Sheets Suppliers in India.
Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.
The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.
UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
PRECIPITATION HARDENING STAINLESS STEEL 15-5PH SHEETS AND PLATES HEAT TREATED :
Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Sheet and Plate
- AMS 5862
- BMS 7-240
- Bar/Forging
- AMS 5659
- ASTM-A-484
- ASTM-A-564
15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.
Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.
Industries that use 15500 include:
- Aerospace
- Chemical
- Food processing
- General metal working
- Paper industries
- Petrochemical
Products partially or completely constructed of 15500 include:
- Aircraft components
- Cylinders
- Engine parts
- Fittings
- Gears
- Hallow shafts
- Marine gas turbine compressor sections
- Paper mill equipment
- Shafts
- Valves
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
|---|---|---|---|---|---|---|---|
| 15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
| STAINLESS STEEL PLATES,GRADES WITH THICKNESS AND WIDTH | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ Thru 6″ Thick Stainless Steel Plate |
| Common Widths of Stainless Plate Coil | 48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request. |
| 200-300 Series Stainless Steel Grades | 202- 301 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H |
| 400 Series Stainless Steel Grades | 405 – 410 – 410S – 416 – 420 – 440C |
| Duplex Stainless Steel Grades | LDX 2101 – Duplex 2205 – Duplex 2507 |
| Precipitation Hardening Grades | 17-4PH – 17-4 H1150 (per customer request) – 15-5PH |
| Nickel Alloy Grades | Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time) |
We export our PRECIPITATION HARDENING STAINLESS STEEL 15-5PH SHEET AND PLATES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
