UNS S30908 Sheets, SS 309S Plates, AISI SS 309S Stainless Steel 309S Sheets Supplier, Manufacturer and Exporter in India
Din 2.4660 SS 309S Plates, SS UNS S30908 Sheets, Stainless Steel 309S Plates, 310 Stainless Steel 309S Sheets Suppliers in India.
STAINLESS STEEL 309S SHEETS AND PLATE GENERAL PROPERTIES:
Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.
STAINLESS STEEL 309S SHEETS AND PLATE APPLICATIONS:
Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:
Heating elements
Aircraft and jet engine parts
Heat exchangers
Carburizing annealing products
Sulfite liquor handling equipment
Kiln liners
Boiler baffles
Refinery and chemical processing equipment
Auto exhaust parts
STAINLESS STEEL 309S SHEETS AND PLATE CORROSION RESISTANCE:
Provide excellent corrosion resistance
More resistant to marine atmospheres than Alloy 304
Often used at higher temperatures to take advantage of their oxidation resistance
Have high resistance to sulfite liquors
Generally considered heat resistant alloys
Destructive scaling temperature is approximately 2000oF
Good scaling resistance with regard to continuous and intermittent services
STAINLESS STEEL 309S SHEETS AND PLATE HIGH TEMPERATURECORROSION:
Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:
Oxidizing conditions (max. sulfur content–2 g/m3)
1922°F (1050°C) continuous service
2012°F (1100°C) peak temperature
Oxidizing conditions (max. sulfur greater than 2 g/m3)
The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.
STAINLESS STEEL 309S SHEETS AND PLATE FABRICATION:
Can be roll formed, stamped, and drawn readily
In process annealing is often required to reduce hardness and increase ductility
STAINLESS STEEL 309S SHEETS AND PLATE HEAT RESISTANCE:
Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
Creep properties can be negatively affected by the use of cold worked material at these higher temperatures
STAINLESS STEEL 309S SHEETS AND PLATE WELDING CHARACTERISTICS:
The austenitic class of stainless steels is generally considered to be weldable
Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
STAINLESS STEEL 309S SHEETS AND PLATE CHEMICAL PROPERTIES:
C
Mn
Si
P
S
Cr
Ni
Fe
309
max: 0.20
2.0 max
0.75 max
0.045 max
0.03 max
min: 22.0 max: 24.0
min: 12.0 max: 15.0
Balance
309H
min: 0.04 max: 0.10
2.0 max
0.75 max
0.045 max
0.03 max
min: 22.0 max: 24.0
min: 12.0 max: 15.0
Balance
STAINLESS STEEL 309S SHEETS AND PLATE MECHANICAL PROPERTIES:
Grade
Tensile Strength ksi (min)
Yield Strength 0.2% ksi (min)
Elongation %
Hardness (Brinell) MAX
309/H
40
30
40
217
STAINLESS STEEL 309S SHEETS AND PLATE PHYSICAL PROPERTIES:
Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.285
9.0 at 32- 212°F
30.7 at 68°F
28.5
8.28 at 32 – 212°F
0.1200 at 68°F to 212°F
2500-2590
STAINLESS STEEL 309S SHEETS AND PLATE ,GRADES WITH THICKNESS AND WIDTH
We export our STAINLESS STEEL 309S SHEETS AND PLATES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.