UNS S20100 Fittings, SS 201 Fittings, AISI SS 201 Stainless Steel 201 Fittings Supplier, Manufacturer and Exporter in India
Din 1.4372 SS 201 Fittings, SS UNS S20100 Fittings, Stainless Steel 201 Fittings, 201 Stainless Steel 201 Fittings Suppliers in India.
DESCRIPTION:
Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications
PRODUCT FORMS:
Sheet, Strip
SPECIFICATION:
ASTM A240, A666
TYPICAL APPLICATIONS:
Typical applications for Types 201 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.
PROCESSING:
The annealing temperature for Type 201 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.
FORMING:
Type 201 has similar bending, forming and drawing characteristics to Type 301 stainless steel
WELDING:
Type 201 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 201 is susceptible to intergranular corrosion in the weld heat affected zone.
CORROSION:
Type 201 is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.
CHEMICAL PROPERTIES:
| Element | Type 201 |
|---|---|
| Carbon | 0.15x |
| Manganese | 5.5 - 7.5 |
| Sulfur | 0.03X |
| Phosphorus | 0.060x |
| Silicon | 1.0 x |
| Chromium | 16 - 18 |
| Nickel | 3.5 -5.5 |
| Nitrogen | 0.25x |
PHYSICAL PROPERTIES:
| Density (lb./ in^2) @ RT | 0.283 | |
|---|---|---|
| Modulus of Elasticity in Tension (psi x 10^6) | 28.6 | |
| Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.12 |
| Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 9.4 |
| Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 8.7 |
| 32 to 600oF | 9.7 | |
| 32 to 1,000oF | 10.2 | |
| Electrical Resistivity (micro ohms - cm) | at 70oF | 69 |
| Melting Point Range (oF) | 2550/2650 | |
| Oxidation Resistance - Continuous Service(oF) | 1550 | |
| Oxidation Resistance - Intermittent Service(oF) | 1500 |
Fittings and Flanges for Stainless Steel Pipe
Stainless steel piping systems can be joined by butt welding and, in the heavier 40S and 80S schedules, with threaded connections.
BUTT WELDING STAINLESS STEEL PIPE FITTINGS
Harsh steel stocks butt welding fittings in the following configuration.
- Elbows 45 degree and 90 degree - long radius and short radius.
- Return bends 180 - long radius and short radius.
- educers - concentric and eccentric.
- Tees - equal and reducing.
- Caps.
- Stub ends - Type B.
Advantages of stainless steel butt Weld fitting to the pipe are to keep pipes permanently leak proof. The continuous structure helps strength between pipes and fittings. It reduces pressure and also minimises the action of corrosion and erosion. Butt welding fittings can be supplied in either seamless or welded construction and are covered by specifications ASTM A403M and ASTM A815M for Duplex grades.
STAINLESS STEEL SCREWED AND SOCKET WELD FITTINGs
Stainless steel piping systems can be connected using stainless steel screwed fittings - BSP threaded ("150lb") low pressure stainless steel fittings and NPT class 3000 high pressure stainless fittings in Grade 316. Socket weld fittings are used in high pressure piping systems and available in grade 316L to suit schedule 80S wall thickness piping.
MANUFACTURING SPECIFICATIONS:
- ASTM A182M (3000lb NPT and socket weld).
- ANSI B16.3 (BSP dimensions)
- ISO 4144 (BSP dimensions)
STAINLESS STEELS FITTINGS AND FLANGES:
A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Forged stainless steel flanges are designed to the following common pressure ratings, stainless steel flanges are exported by Harsh Steel in Classes 150, 300, 600, 900, 1500 and 2500. Standard sealing face is Raised Face (RF).
The basic types of flanges are:
- Stainless steel slip-on flange
- Stainless steel socket weld flange
- Stainless steel blind flange
- Stainless steel lap joint flange
- Stainless steel weld neck flange
- Stainless steel threaded flange
- Stainless steel orifice Flange
Manufacturing specification: ASTM A182M
Plate stainless steel flanges are cut and machined from plate - Table 'D', Table 'E', etc.
Manufacturing specification: AS2129.
Types and applications of Stainless steel and Nickel alloy flanges
Slip-on flanges |
The flange is slipped over the pipe and then welded both inside and outside to provide sufficient strength and prevent leakage. Slip-on flanges are also used as loose back-up flanges when stub ends are used. |
| Blind flanges | This is a flange without a centre bore, used to shut off a piping system or vessel opening |
| Weld neck flanges | This is a flange without a centre bore, used to shut off a piping system or vessel opening |
| Lap joint flanges | This is again similar to a slip-on flange, but has a radius at the intersection of the centre bore and the flange face to accommodate a lap stub end. |
We export our STAINLESS STEEL 201 FITTINGS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
