UNS S40500 Fittings, SS 405 Fittings, AISI SS 405 Stainless Steel 405 Fittings Supplier, Manufacturer and Exporter in India
Din 1.4002 SS 405 Fittings, SS UNS S40500 Fittings, Stainless Steel 405 Fittings, 405 Stainless Steel Fittings Suppliers in India.
GENERAL PROPERTIES:-
Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
Specifications: UNS S40500
APPLICATIONS:-
Applications that frequently use alloy 405 include, but are not limited to:
- Steam nozzles
- Partitions
- Annealing boxes
- Quenching racks
- Fabrications that cannot be annealed after welding
CORROSION RESISTANCE:
- Same corrosion resistance of Type 410 Steel
- Used in situations where more weldability is desired than Type 410
MACHINABILITY
- Type 405 can be easily machined due to its soft and ductile characteristics
WELDABILITY
- Can be welded using shielded fusion and resistance techniques
- Oxyacetylene is not recommended
- Post weld annealing will maximize ductility
CHEMICAL PROPERTIES:-
| C | Cr | Fe | Mn | Si | S | P | Ni | Al | |
|---|---|---|---|---|---|---|---|---|---|
| 405 | 0.08 max |
min: 11.5 max: 14.5 |
balance |
1.0 max |
1.0 max |
0.03 max |
0.04 max |
0.50 max |
min: 0.1 max: 0.3 |
MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
|---|---|---|---|---|---|
| 405 |
60 (415) |
25 (170) |
20 | 179 | 88 |
PHYSICAL PROPERTIES:
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
|---|---|---|---|---|---|
| at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
| 0.279 | 9.2 | 20.5 | 416 | 0.11 | 28 x 106 |
| Stainless Steel Pipe Fittings and Flanges | |
| Manufacture | Stainless steel Welded and Seamless pipe fittings |
| Size Range | DN6 - DN600 |
| Grades | 202, ASTM A312 in 304/304L and 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
|---|---|
| Wall Thickness | Sch 10S, 40S, 80S |
| Type | Stainless steel Butt weld, Screwed & socket, Flanges |
| Shapes | Stainless steel Elbows, Tees, Reducers, Caps, Stub ends, Flanges (ANSI, Table E & Table D) |
Fittings and Flanges for Stainless Steel Pipe
Stainless steel piping systems can be joined by butt welding and, in the heavier 40S and 80S schedules, with threaded connections.
Butt welding stainless steel pipe fittings
Harsh steel stocks butt welding fittings in the following configuration.
- Elbows 45 degree and 90 degree - long radius and short radius.
- Return bends 180 - long radius and short radius.
- Reducers - concentric and eccentric.
- Tees - equal and reducing.
- Caps.
- Stub ends - Type B.
Advantages of stainless steel butt Weld fitting to the pipe are to keep pipes permanently leak proof. The continuous structure helps strength between pipes and fittings. It reduces pressure and also minimises the action of corrosion and erosion. Butt welding fittings can be supplied in either seamless or welded construction and are covered by specifications ASTM A403M and ASTM A815M for Duplex grades.
Stainless steel Screwed and socket weld fittings
Stainless steel piping systems can be connected using stainless steel screwed fittings - BSP threaded ("150lb") low pressure stainless steel fittings and NPT class 3000 high pressure stainless fittings in Grade 316. Socket weld fittings are used in high pressure piping systems and available in grade 316L to suit schedule 80S wall thickness piping.
Manufacturing specification:
- ASTM A182M (3000lb NPT and socket weld).
- ANSI B16.3 (BSP dimensions)
- ISO 4144 (BSP dimensions)
Stainless steel flanges
A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Forged stainless steel flanges are designed to the following common pressure ratings, stainless steel flanges are exported by Harsh Steel in Classes 150, 300, 600, 900, 1500 and 2500. Standard sealing face is Raised Face (RF).
The basic types of flanges are:
- Stainless steel slip-on flange
- Stainless steel socket weld flange
- Stainless steel blind flange
- Stainless steel lap joint flange
- Stainless steel weld neck flange
- Stainless steel threaded flange
- Stainless steel orifice Flange
Manufacturing specification: ASTM A182M
Plate stainless steel flanges are cut and machined from plate - Table 'D', Table 'E', etc.
Manufacturing specification: AS2129.
Types and applications of Stainless steel and Nickel alloy flanges
| Slip-on flanges | The flange is slipped over the pipe and then welded both inside and outside to provide sufficient strength and prevent leakage. Slip-on flanges are also used as loose back-up flanges when stub ends are used. |
| Blind flanges | This is a flange without a centre bore, used to shut off a piping system or vessel opening |
| Weld neck flanges | This is a flange without a centre bore, used to shut off a piping system or vessel opening |
| Lap joint flanges | This is again similar to a slip-on flange, but has a radius at the intersection of the centre bore and the flange face to accommodate a lap stub end. |
We export our STAINLESS STEEL 405 FITTINGS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
