UNS S30100 Round Bars, SS 301 Round Bars, AISI SS 301 Stainless Steel 301 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4310 SS 301 Round Bars, SS UNS S30100 Round Bars, Stainless Steel 301 Round Rods, 301 Stainless Steel 301 Round Bars Suppliers in India.
STAINLESS STEEL 301 ROUND BARS GENERAL PROPERTIES:
Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, and full hard.
STAINLESS STEEL 301 ROUND BARS APPLICATIONS:
High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include:
- aircraft structural parts
- trailer bodies
- utensils
- architectural and automotive rim
- roof drainage products
- conveyor belts
- variety of industrial applications.
STAINLESS STEEL 301 ROUND BARS CORROSION RESISTANCE:
- Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures.
- Resists outdoor, industrial, marine, and mild chemical environments
- susceptible to carbide precipitation during welding, which restricts its use in some applications
- Similar to resistance of Stainless Steel grade 304
STAINLESS STEEL 301 ROUND BARS HEAT RESISTANCE:
- Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C).
- Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
- Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C).
STAINLESS STEEL 301 ROUND BARS HEAT TREATMENT:
- Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly.
- Use low side of range for intermediate annealing.
- This grade cannot be hardened by thermal treatment.
STAINLESS STEEL 301 ROUND BARS COLD WORKING:
- hardens at high rate, creating a very high strength from cold rolling and from roll forming.
- more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
- strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process.
- severe cold deformation can still occur, due to residual ductility.
- Grade 301 becomes strongly magnetic when cold rolled.
STAINLESS STEEL 301 ROUND BARS WELDING:
- must be annealed for maximum corrosion resistance
- more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
- must be annealed for maximum corrosion resistance
- Welding and post weld annealing will both remove high strength induced by prior cold rolling.
- Spot welding is commonly used to assemble cold rolled 301 components..
- material will lose temper in the heat affected weld zone.
STAINLESS STEEL 301 ROUND BARS CHEMICAL PROPERTIES:
| % | Cr | Ni | C | Si | Mn | P | S | N | |
|---|---|---|---|---|---|---|---|---|---|
| 301 | Min: | 16 | 6 | - | - | - | - | - |
- |
| Max: | 18 | 8 | 0.15 | 1.00 | 2.0 | 0.045 | 0.030 | 0.10 |
STAINLESS STEEL 301 ROUND BARS MECHANICAL PROPERTIES:
| Grade/Temper | Tensile Strength ksi (min.) | Yield Strength 0.2% ksi (min.) | Elongation -% in 50 mm (min.) |
|---|---|---|---|
| 301 1/4 | 125 | 75 | 25 |
| 301 1/2 | 150 | 110 | 18 |
| 301 Full Hard | 185 | 140 | 9 |
STAINLESS STEEL 301 ROUND BARS PHYSICAL PROPERTIES:
| Denstiy lbm/in3 | Coefficient of Thermal Expansion (min/in)-°F | Electrical Resistivity mW-in | Thermal Conductivity BTU/hr-ft-°F | Melting Range | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.29 | at 68 – 212°F | at 68 – 932°F | at 68 – 1450°F | at 68°F | at 212°F | at 392°F | at 752°F | at 1112°F | at 1472°F | at 68 – 212°F | 2550-2590°F |
| 9.2 | 10.4 | 10.9 | 28.3 | 30.7 | 33.8 | 39.4 | 43.7 | 47.6 | 9.4 | ||
Cold Drawn Stainless steel Wire Round Bars
Application :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.
Condition |
Cold Drawn & Polished |
Cold Drawn, Centre less Ground & Polished |
Cold Drawn, Centre less Ground & Polished (Strain Hardened) |
|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-4ph, Duplex steel 2205 |
304, 304L, 316, 316L |
|
Diameter (Size) |
2 mm to 5mm (1/8" to 3/16") |
6mm to 22m (1/4" to 7/8") |
10mm to 40mm (3/8" to 1-1/2") |
Diameter Tolerance |
h9 (Din 671),h11 |
h9 (Din 671) |
h9 (Din 671),h11 |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+200mm |
Peeled Turned Polished Stainless Steel Round Bars and Stainless steel forged Bars:
Condition |
Peeled, Centreless Ground & Polished |
Peeled & Polished |
Peeled |
Forged, |
|---|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-7,17-4ph, Duplex steel 2205, Duplex steel 2507 |
304, 304L, 316, 316L, 410, 416, 420, 431, 17-4Ph |
303, 304, 304L, 316, 316L, 410, 416, 420, 431, 17-4 ph |
|
Diameter (Size) |
20mm to 85mm |
85mm to 140mm |
25mm to 140mm |
150mm to 400mm (6 ” to 16 ”) |
Diameter Tolerance |
h9 (Din 671) tolerance |
h11 tolerance |
K12/K13 |
-0mm/+3mm |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3 meter -5 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet) |
-0/+2 meter- |
We export our STAINLESS STEEL 301 ROUND BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
