UNS S30900 Round Bars, SS 309 Round Bars, AISI SS 309S Stainless Steel 309 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4828 SS 309 Round Bars, SS UNS S30900 Round Bars, Stainless Steel 309 Round Rods, 310 Stainless Steel 309 Round Suppliers in India.
STAINLESS STEEL 309 ROUND BARS GENERAL PROPERTIES:
Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.
STAINLESS STEEL 309 ROUND BARS APPLICATIONS:
Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:
- Heating elements
- Aircraft and jet engine parts
- Heat exchangers
- Carburizing annealing products
- Sulfite liquor handling equipment
- Kiln liners
- Boiler baffles
- Refinery and chemical processing equipment
- Auto exhaust parts
STAINLESS STEEL 309 ROUND BARS CORROSION RESISTANCE:
- Provide excellent corrosion resistance
- More resistant to marine atmospheres than Alloy 304
- Often used at higher temperatures to take advantage of their oxidation resistance
- Have high resistance to sulfite liquors
- Generally considered heat resistant alloys
- Destructive scaling temperature is approximately 2000oF
- Good scaling resistance with regard to continuous and intermittent services
STAINLESS STEEL 309 ROUND BARS HIGH TEMPERATURECORROSION:
Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:
- Oxidizing conditions (max. sulfur content–2 g/m3)
- 1922°F (1050°C) continuous service
- 2012°F (1100°C) peak temperature
- Oxidizing conditions (max. sulfur greater than 2 g/m3)
- 1742°F (950°C) maximum temperature
- Low oxygen atmosphere (max. sulfur content–2 g/m3)
- 1832°F (1000°C) maximum temperature
- Nitriding or carburizing atmospheres
- 1562–1742°F (850–950°C) maximum
The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.
STAINLESS STEEL 309 ROUND BARS FABRICATION:
- Can be roll formed, stamped, and drawn readily
- In process annealing is often required to reduce hardness and increase ductility
STAINLESS STEEL 309 ROUND BARS HEAT RESISTANCE:
- Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
- Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
- Creep properties can be negatively affected by the use of cold worked material at these higher temperatures
STAINLESS STEEL 309 ROUND BARS WELDING CHARACTERISTICS:
- The austenitic class of stainless steels is generally considered to be weldable
- Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
- Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
STAINLESS STEEL 309 ROUND BARS CHEMICAL PROPERTIES:
| C | Mn | Si | P | S | Cr | Ni | Fe | |
|---|---|---|---|---|---|---|---|---|
| 309 | max: 0.20 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
| 309H | min: 0.04 max: 0.10 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
STAINLESS STEEL 309 ROUND BARS MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX |
|---|---|---|---|---|
| 309/H | 40 | 30 | 40 | 217 |
STAINLESS STEEL 309 ROUND BARS PHYSICAL PROPERTIES:
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.0 at 32- 212°F | 30.7 at 68°F | 28.5 | 8.28 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500-2590 |
Harsh steel Supplies and Exports Stainless steel 309 round bars from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
Cold Drawn Stainless steel Wire Round Bars
Application :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.
Condition |
Cold Drawn & Polished |
Cold Drawn, Centre less Ground & Polished |
Cold Drawn, Centre less Ground & Polished (Strain Hardened) |
|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-4ph, Duplex steel 2205 |
304, 304L, 316, 316L |
|
Diameter (Size) |
2 mm to 5mm (1/8" to 3/16") |
6mm to 22m (1/4" to 7/8") |
10mm to 40mm (3/8" to 1-1/2") |
Diameter Tolerance |
h9 (Din 671),h11 |
h9 (Din 671) |
h9 (Din 671),h11 |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+200mm |
Peeled Turned Polished Stainless Steel Round Bars and Stainless steel forged Bars:
Condition |
Peeled, Centreless Ground & Polished |
Peeled & Polished |
Peeled |
Forged, |
|---|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-7,17-4ph, Duplex steel 2205, Duplex steel 2507 |
304, 304L, 316, 316L, 410, 416, 420, 431, 17-4Ph |
303, 304, 304L, 316, 316L, 410, 416, 420, 431, 17-4 ph |
|
Diameter (Size) |
20mm to 85mm |
85mm to 140mm |
25mm to 140mm |
150mm to 400mm (6 ” to 16 ”) |
Diameter Tolerance |
h9 (Din 671) tolerance |
h11 tolerance |
K12/K13 |
-0mm/+3mm |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3 meter -5 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet) |
-0/+2 meter- |
We export our STAINLESS STEEL 309S ROUND BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
