UNS S31700 Round Bars, SS 317 Round Bars, AISI SS 317 Stainless Steel 317 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4449 SS 317 Round Bars, SS UNS S31700 Round Bars, Stainless Steel 317 Round Rods, 317 Stainless Steel 317 Round Bars Suppliers in India.
STAINLESS STEEL 317 ROUND BARS GENERAL PROPERTIES:
317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
STAINLESS STEEL 317 ROUND BARS APPLICATIONS:
- Flue-gas desulfurization systems
- Chemical process vessels
- Petrochemical
- Pulp and Paper
- Condensers in power generation
STAINLESS STEEL 317 ROUND BARS CORROSION PROPERTIES:
317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
STAINLESS STEEL 317 ROUND BARS WELDING:
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.
STAINLESS STEEL 317 ROUND BARS CHARACTERISTICS:
- Improved general and localized corrosion to 316L stainless
- Good formability
- Good weldability
STAINLESS STEEL 317 ROUND BARS CHEMICAL PROPERTIES:
Ni |
Cr |
Mo |
Mn |
Si |
|---|---|---|---|---|
11.0 - 15.0 |
18.0 - 20.0 |
3.0 - 4.0 |
2.0 Max |
.75 Max |
C |
N |
S |
P |
Fe |
0.03 Max |
0.1 Max |
0.03 Max |
0.045 Max |
Balance |
STAINLESS STEEL 317 ROUND BARS MECHANICAL PROPERTIES:
Ultimate Tensile Strength, ksi Minimum |
.2% Yield Strength, ksi Minimum |
Elongation Percent | Hardness Max. |
|---|---|---|---|
75 |
30 |
35 |
217 Brinell |
Harsh steel Supplies and Exports Stainless steel 317 strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
Cold Drawn Stainless steel Wire Round Bars
Application :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.
Condition |
Cold Drawn & Polished |
Cold Drawn, Centre less Ground & Polished |
Cold Drawn, Centre less Ground & Polished (Strain Hardened) |
|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-4ph, Duplex steel 2205 |
304, 304L, 316, 316L |
|
Diameter (Size) |
2 mm to 5mm (1/8" to 3/16") |
6mm to 22m (1/4" to 7/8") |
10mm to 40mm (3/8" to 1-1/2") |
Diameter Tolerance |
h9 (Din 671),h41 |
h9 (Din 671) |
h9 (Din 671),h41 |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+200mm |
Peeled Turned Polished Stainless Steel Round Bars and Stainless steel forged Bars:
Condition |
Peeled, Centreless Ground & Polished |
Peeled & Polished |
Peeled |
Forged, |
|---|---|---|---|---|
Grades |
Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-7,17-4ph, Duplex steel 2205, Duplex steel 2507 |
304, 304L, 316, 316L, 410, 416, 420, 431, 17-4Ph |
303, 304, 304L, 316, 316L, 410, 416, 420, 431, 17-4 ph |
|
Diameter (Size) |
20mm to 85mm |
85mm to 140mm |
25mm to 140mm |
150mm to 400mm (6 ” to 16 ”) |
Diameter Tolerance |
h9 (Din 671) tolerance |
h41 tolerance |
K12/K13 |
-0mm/+3mm |
Length |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3/4/5.6/6 meter |
3 meter -5 meter |
Length Tolerance |
-0/+200mm or |
-0/+200mm or |
-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet) |
-0/+2 meter- |
We export our STAINLESS STEEL 317 ROUND BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
