Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

ASTM B649 Round Bars, ASME SB649 Round Bars, Stainless Steel 904L Round Bars Supplier, Manufacturer and Exporter in India


Din 1.4539 Stainless Steel 904L Round Bars, UNS N08904 Round Bars, Stainless Steel 904L Threaded Rods, Stainless Steel 904L Cold Drawn Bars Suppliers in India.

STAINLESS STEEL 904L ROUND BARSAVAILABILITY:

  • Seamless Pipe 1/2" W

STAINLESS STEEL 904L ROUND BARS SPECIFICATION:

  • ASTM B677, B366
  • ASME SB677, SB366

STAINLESS STEEL 904L ROUND BARS DESCRIPTION:

904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.


STAINLESS STEEL 904L ROUND BARS DESIGN FEATURES:

  • Good resistance to pitting and crevice corrosion.
  • Very good resistance to stress corrosion cracking.
  • Good resistance to intergranular corrosion.
  • Good formability and weldability.
  • Maximum service temperatures of 450 deg.C. (824 deg.F).

STAINLESS STEEL 904L ROUND BARS TYPICAL APPLICATIONS:

  • Production and transport of sulfuric acid
  • Metal pickling in sulfuric acid
  • Production and concentration of phosphoric acid
  • Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
  • Paper and allied industries
  • Gas washing
  • Chemical and pharmaceutical industries

STAINLESS STEEL 904L ROUND BARS TENSILE REQUIREMENTS:

  • Tensile Strength (KSI) 70
  • Yield Strength (KSI) 25
  • KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

STAINLESS STEEL 904L ROUND BARS CHEMICAL COMPOSITION:

C Cr Cu Mn Mo Ni P S Si
Max     Max     Max Max Max
0.02 19.0-23.0 1.0-2.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0

Cold Drawn Stainless steel Wire Round Bars
Application :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.


Condition

Cold Drawn & Polished

Cold Drawn, Centre less Ground & Polished

Cold Drawn, Centre less Ground & Polished (Strain Hardened)

Grades

Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-4ph, Duplex steel 2205

304, 304L, 316, 316L

Diameter (Size)

2 mm to 5mm (1/8" to 3/16")

6mm to 22m (1/4" to 7/8")

10mm to 40mm (3/8" to 1-1/2")

Diameter Tolerance

h9 (Din 671),h41
ASTM A 484

h9 (Din 671)
ASTM A 484

h9 (Din 671),h41
ASTM A 484

Length

3/4/5.6/6 meter
(12/14ft/20feet)

3/4/5.6/6 meter
(12/14ft/20feet)

3/4/5.6/6 meter
(12/14ft/20feet)

Length Tolerance

-0/+200mm or
+100mm or +50mm 
(-0 ”/+1 feet or +4 ” or 2 ”)

-0/+200mm or
+100mm or +50mm 
(-0 ”/+1 feet or +4 ” or 2 ”)

-0/+200mm 
(-0 ”/+1 feet)

Peeled Turned Polished Stainless Steel Round Bars and Stainless steel forged Bars:


Condition

Peeled, Centreless Ground & Polished

Peeled & Polished

Peeled 
(Rough Turned)

Forged,
Rough Turned

Grades

Alloy 286,Alloy 20, 202, 303, 304, 304L, 310, 316, 316L, 32, 410, 420, 416, 430, 431, 430F , 630, 17-7,17-4ph, Duplex steel 2205, Duplex steel 2507

304, 304L, 316, 316L, 410, 416, 420, 431, 17-4Ph

303, 304, 304L, 316, 316L, 410, 416, 420, 431, 17-4 ph

Diameter (Size)

20mm to 85mm 
(3/4 ” to 3--1/4 ”)

85mm to 140mm
(3-1/4 ” to 4--3/4 ”)

25mm to 140mm
(1 ” to 5--1/2 ”)

150mm to 400mm (6 ” to 16 ”)

Diameter Tolerance

h9 (Din 671) tolerance
ASTM A 484

h41 tolerance

K12/K13
(Din 1013)

-0mm/+3mm
(-0 ”/+0.12 ”)

Length

3/4/5.6/6 meter
(12feet /14feet/20feet)

3/4/5.6/6 meter
(12feet/14feet/20feet)

3/4/5.6/6 meter
(12feet/14feet/20feet)

3 meter -5 meter
10 feet -16 feet

Length Tolerance

-0/+200mm or
+100mm or +50mm 
(-0 ”/+1 feet or +4 ” or 2 ”)

-0/+200mm or
+100mm or +50mm 
(-0 ”/+1 feet or +4 ” or 2 ”)

-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet)

-0/+2 meter-
-0/+6 feet

We export our STAINLESS STEEL 904L ROUND BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 904L ROUND BARS
Author Rating
5starstarstarstarstar