UNS S30908 Flat Bars, SS 309S Flat Bars, AISI SS 309S Stainless Steel 309S Flat Bars Supplier, Manufacturer and Exporter in India
Din 2.4660 SS 309S Flat Bars, SS UNS S30908 Flat Bars, Stainless Steel 309S Flat Rods, 310 Stainless Steel 309S Flat Bars Suppliers in India.
STAINLESS STEEL 309S FLAT BAR GENERAL PROPERTIES:
Alloys 309 and 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309 and 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much less carbon composition which minimizes carbide precipitation and improves weldability.
STAINLESS STEEL 309S FLAT BAR APPLICATIONS:
Alloys 309 and 309S are used exclusively for their high temperature oxidation resistance, excellent high temperature strength, along with their resistance to creep deformation and environmental attack. Some examples include, but are not limited to:
- Heating elements
- Aircraft and jet engine parts
- Heat exchangers
- Carburizing annealing products
- Sulfite liquor handling equipment
- Kiln liners
- Boiler baffles
- Refinery and chemical processing equipment
- Auto exhaust parts
STAINLESS STEEL 309S FLAT BAR CORROSION RESISTANCE:
- Provide excellent corrosion resistance
- More resistant to marine atmospheres than Alloy 304
- Often used at higher temperatures to take advantage of their oxidation resistance
- Have high resistance to sulfite liquors
- Generally considered heat resistant alloys
- Destructive scaling temperature is approximately 2000oF
- Good scaling resistance with regard to continuous and intermittent services
STAINLESS STEEL 309S FLAT BAR HIGH TEMPERATURECORROSION:
Alloy 309 resists high temperature corrosion in most in-service conditions. Operating temperatures are as follows:
- Oxidizing conditions (max. sulfur content–2 g/m3)
- 1922°F (1050°C) continuous service
- 2012°F (1100°C) peak temperature
- Oxidizing conditions (max. sulfur greater than 2 g/m3)
- 1742°F (950°C) maximum temperature
- Low oxygen atmosphere (max. sulfur content–2 g/m3)
- 1832°F (1000°C) maximum temperature
- Nitriding or carburizing atmospheres
- 1562–1742°F (850–950°C) maximum
The alloy does not perform as well as Alloy 600 (UNS N06600) or Alloy 800 (UNS N08800) in reducing, nitriding or carburizing atmospheres, but it does outperform most heat resistant stainless steels in these conditions.
STAINLESS STEEL 309S FLAT BAR FABRICATION:
- Can be roll formed, stamped, and drawn readily
- In process annealing is often required to reduce hardness and increase ductility
STAINLESS STEEL 309S FLAT BAR HEAT RESISTANCE:
- Cannot be hardened through heat treatment because the consist solely of austenite at room temperature
- Higher tensile and yield strengths that can be obtained through cold working and not followed by full annealing are not stable at the higher temperatures where these alloys are used
- Creep properties can be negatively affected by the use of cold worked material at these higher temperatures
STAINLESS STEEL 309S FLAT BAR WELDING CHARACTERISTICS:
- The austenitic class of stainless steels is generally considered to be weldable
- Generally considered to have weldability equivalent to the most common alloys of the austenitic class 304 and 304L
- Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
STAINLESS STEEL 309S FLAT BAR CHEMICAL PROPERTIES:
| C | Mn | Si | P | S | Cr | Ni | Fe | |
|---|---|---|---|---|---|---|---|---|
| 309 | max: 0.20 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
| 309H | min: 0.04 max: 0.10 | 2.0 max | 0.75 max | 0.045 max | 0.03 max | min: 22.0 max: 24.0 | min: 12.0 max: 15.0 | Balance |
STAINLESS STEEL 309S FLAT BAR MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (min) | Yield Strength 0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX |
|---|---|---|---|---|
| 309/H | 40 | 30 | 40 | 217 |
STAINLESS STEEL 309S FLAT BAR PHYSICAL PROPERTIES:
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.0 at 32- 212°F | 30.7 at 68°F | 28.5 | 8.28 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500-2590 |
- Width:25mm to 60mm
- Thickness:5mm to 12mm
- Finish :Hot Rolled Annealed & Pickled (HRAP)
- Length:3 to 6 Meters / 12 to 20 feet
- End Finish :Both ends are marked with special colors.
- Size tolerance:A276/484 / DIN 1028 (Full specification mentioned below)
- Packing:Bars are packed in 1000 to 1,200 kgs bundles in waterproof HDPE cloths, Standard Export Seaworthy, Marking of Sizes, Grade, Net Wt, Gross Wt, No of pieces, POD, Origin should Mentioned on Each bundles
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Delivery:60-75 Days from the order finalization
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Grades:AISI 304 / 304L, 201, 202, 316
We export our STAINLESS STEEL 309S FLAT BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
