UNS S40500 Flat Bars, SS 405 Flat Bars, AISI SS 405 Stainless Steel 405 Flat Bars Supplier, Manufacturer and Exporter in India
Din 1.4002 SS 405 Flat Bars, SS UNS S40500 Flat Bars, Stainless Steel 405 Flat Rods, 405 Stainless Steel Cold Drawn Bars Suppliers in India.
STAINLESS STEEL 405 FLAT BAR GENERAL PROPERTIES:
Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
Specifications: UNS S40500
STAINLESS STEEL 405 FLAT BAR APPLICATIONS:
Applications that frequently use alloy 405 include, but are not limited to:
- Steam nozzles
- Partitions
- Annealing boxes
- Quenching racks
- Fabrications that cannot be annealed after welding
STAINLESS STEEL 405 FLAT BAR CORROSION RESISTANCE:
- Same corrosion resistance of Type 410 Steel
- Used in situations where more weldability is desired than Type 410
STAINLESS STEEL 405 FLAT BAR MACHINABILITY:
- Type 405 can be easily machined due to its soft and ductile characteristics
STAINLESS STEEL 405 FLAT BAR WELDABILITY:
- Can be welded using shielded fusion and resistance techniques
- Oxyacetylene is not recommended
- Post weld annealing will maximize ductility
STAINLESS STEEL 405 FLAT BAR CHEMICAL PROPERTIES:
C | Cr | Fe | Mn | Si | S | P | Ni | Al | |
---|---|---|---|---|---|---|---|---|---|
405 | 0.08 max | min: 11.5 max: 14.5 |
balance | 1.0 max |
1.0 max |
0.03 max |
0.04 max |
0.50 max |
min: 0.1 max: 0.3 |
STAINLESS STEEL 405 FLAT BAR MECHANICAL PROPERTIES:
Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
---|---|---|---|---|---|
405 | 60 (415) |
25 (170) |
20 | 179 | 88 |
STAINLESS STEEL 405 FLAT BAR PHYSICAL PROPERTIES:
Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
---|---|---|---|---|---|
at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
0.279 | 9.2 | 20.5 | 416 | 0.11 | 28 x 106 |
- Width:25mm to 60mm
- Thickness:5mm to 12mm
- Finish :Hot Rolled Annealed & Pickled (HRAP)
- Length:3 to 6 Meters / 12 to 20 feet
- End Finish :Both ends are marked with special colors.
- Size tolerance:A276/484 / DIN 1028 (Full specification mentioned below)
- Packing:Bars are packed in 1000 to 1,200 kgs bundles in waterproof HDPE cloths, Standard Export Seaworthy, Marking of Sizes, Grade, Net Wt, Gross Wt, No of pieces, POD, Origin should Mentioned on Each bundles
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Delivery:60-75 Days from the order finalization
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Grades:AISI 304 / 304L, 201, 202, 316
We export our STAINLESS STEEL 405 FLAT BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.