STAINLESS STEEL 316LN FLAT BAR INTRODUCTION:
Stainless steel grade 316LN is an austenitic type of steel that is a low carbon, nitrogen-enhanced version of grade 316 steel. The nitrogen content in this steel provides solid solution hardening, and raises its minimum specified yield strength. It also possesses good resistance to general corrosion and pitting/crevice corrosion.
The following datasheet provides an overview of stainless steel grade 316LN.
STAINLESS STEEL 316LN FLAT BAR CHEMICAL COMPOSITION:
The chemical composition of grade 316LN stainless steel is outlined in the following table.
Element |
Content (%) |
Iron, Fe |
Balance |
Chromium, Cr |
16.0-18.0 |
Nickel, Ni |
10.0-14.0 |
Molybdenum, Mo |
2.0-3.0 |
Manganese, Mn |
2.00 |
Silicon, Si |
1.00 |
Nitrogen, N |
0.10-0.30 |
Phosphorous, P |
0.045 |
Carbon, C |
0.03 |
Sulfur, S |
0.03 |
STAINLESS STEEL 316LN FLAT BAR MECHANICAL PROPERTIES:
The mechanical properties of grade 316LN stainless steel are displayed in the following table.
Properties |
Metric |
Imperial |
Tensile strength |
515 MPa |
74694 psi |
Yield strength |
205 MPa |
29732 psi |
Modulus of elasticity |
190-210 GPa |
27557-30457 ksi |
Poisson's ratio |
0.27-0.30 |
0.27-0.30 |
Elongation at break (in 50 mm) |
60% |
60% |
STAINLESS STEEL 316LN FLAT BAR OTHER DESIGNATION:
Equivalent materials to grade 316LN stainless steel are given below.
ASTM A182 |
ASTM A213 |
ASTM A240 |
ASTM A240 |
ASTM A276 |
ASTM A193 (B8MN, B8MNA) |
ASTM A312 |
ASTM A336 |
ASTM A358 |
ASTM A376 |
ASTM A194 (B8MN, B8MNA) |
ASTM A403 |
ASTM A430 |
ASTM A479 |
ASTM A666 |
ASTM A688
|
ASTM A813
|
ASTM A814
|
DIN 1.4406
|
DIN 1.4429
|
STAINLESS STEEL 316LN FLAT BAR APPLICATION:
Grade 316LN stainless steel is widely used in the following applications:
-
Trauma nails
-
Orthopedic implants
-
Neurological applications
-
Surgical instruments
- Width:25mm to 60mm
- Thickness:5mm to 12mm
- Finish :Hot Rolled Annealed & Pickled (HRAP)
- Length:3 to 6 Meters / 12 to 20 feet
- End Finish :Both ends are marked with special colors.
- Size tolerance:A276/484 / DIN 1028 (Full specification mentioned below)
- Packing:Bars are packed in 1000 to 1,200 kgs bundles in waterproof HDPE cloths, Standard Export Seaworthy, Marking of Sizes, Grade, Net Wt, Gross Wt, No of pieces, POD, Origin should
Mentioned on Each bundles
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Delivery:60-75 Days from the order finalization
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Grades:AISI 304 / 304L, 201, 202, 316
We export our STAINLESS STEEL 316LN FLAT BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.