STAINLESS STEEL 904L FLAT BAR AVAILABILITY:
STAINLESS STEEL 904L FLAT BAR SPECIFICATION:
- ASTM B677, B366
- ASME SB677, SB366
STAINLESS STEEL 904L FLAT BAR DESCRIPTION:
904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.
STAINLESS STEEL 904L FLAT BAR DESIGN FEATURES:
- Good resistance to pitting and crevice corrosion.
- Very good resistance to stress corrosion cracking.
- Good resistance to intergranular corrosion.
- Good formability and weldability.
- Maximum service temperatures of 450 deg.C. (824 deg.F).
STAINLESS STEEL 904L FLAT BAR TYPICAL APPLICATIONS:
- Production and transport of sulfuric acid
- Metal pickling in sulfuric acid
- Production and concentration of phosphoric acid
- Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
- Paper and allied industries
- Gas washing
- Chemical and pharmaceutical industries
STAINLESS STEEL 904L FLAT BAR TENSILE REQUIREMENTS:
- Tensile Strength (KSI) 70
- Yield Strength (KSI) 25
- KSI can be converted to MPA (Megapascals) by multiplying by 6.895.
STAINLESS STEEL 904L FLAT BAR CHEMICAL COMPOSITION:
C |
Cr |
Cu |
Mn |
Mo |
Ni |
P |
S |
Si |
Max |
|
|
Max |
|
|
Max |
Max |
Max |
0.02 |
19.0-23.0 |
1.0-2.0 |
2.0 |
4.0-5.0 |
23.0-28.0 |
0.045 |
0.035 |
1.0 |
- Width:25mm to 60mm
- Thickness:5mm to 12mm
- Finish :Hot Rolled Annealed & Pickled (HRAP)
- Length:3 to 6 Meters / 12 to 20 feet
- End Finish :Both ends are marked with special colors.
- Size tolerance:A276/484 / DIN 1028 (Full specification mentioned below)
- Packing:Bars are packed in 1000 to 1,200 kgs bundles in waterproof HDPE cloths, Standard Export Seaworthy, Marking of Sizes, Grade, Net Wt, Gross Wt, No of pieces, POD, Origin should
Mentioned on Each bundles
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Delivery:60-75 Days from the order finalization
- Marking:Size, Grade, Manufacture name on Each Bars/Pieces
- Grades:AISI 304 / 304L, 201, 202, 316
We export our STAINLESS STEEL 904L FLAT BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.