UNS S31703 Angle, SS 317LN Angle, AISI SS 317LN Stainless Steel 317LN Angle Supplier, Manufacturer and Exporter in India
Din 1.4434 SS 317LN Angle, SS UNS S31703 Angle, Stainless Steel 317LN Angle, 317LN Stainless Steel Angle Suppliers in India.
STAINLESS STEEL 317LN ANGLE GENERAL PROPERTIES:
317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
STAINLESS STEEL 317LN ANGLE APPLICATIONS:
- Flue-gas desulfurization systems
- Chemical process vessels
- Petrochemical
- Pulp and Paper
- Condensers in power generation
STAINLESS STEEL 317LN ANGLE CORROSION PROPERTIES:
317LN has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316LN stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317LN is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317LN is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
STAINLESS STEEL 317LN ANGLE WELDING:
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317LN steel.
STAINLESS STEEL 317LN ANGLE CHARACTERISTICS:
- Improved general and localized corrosion to 316L stainless
- Good formability
- Good weldability
STAINLESS STEEL 317LN ANGLE CHEMICAL PROPERTIES:
| Ni | Cr | Mo | Mn | Si |
|---|---|---|---|---|
| 11.0 - 15.0 | 18.0 - 20.0 | 3.0 - 4.0 | 2.0 Max | .75 Max |
| C | N | S | P | Fe |
| 0.03 Max | 0.1 Max | 0.03 Max | 0.045 Max | Balance |
STAINLESS STEEL 317LN ANGLE MECHANICAL PROPERTIES:
| Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | Elongation Percent | Hardness Max. |
|---|---|---|---|
| 75 | 30 | 35 | 217 Brinell |
WHY TO CHOOSE HARSH STEEL STAINLESS STEEL ANGLE BARS?
- Corrosion resistance
- Durable
- Very sturdy
- Easy to install
- Fire and heat resistance
- Rust free
- Abrasion free
HARSH STEEL STAINLESS STEEL ANGLE BARS USED IN?
- Architectural applications
- Bridges
- Transmission towers
- Hoisting and conveying machinery
- Ships
- Industrial furnace
- Reaction tower
- Container frame and warehouse shelves
- Multi-storied building
- Fabrication
STAINLESS STEEL 317LN ANGLE DETAILS:
- Finish:Hot Rolled Annealed & Pickled (HRAP)
- Length: 3 to 7 Meters / 12 to 24 feet
- End Finish: Both ends are marked with special colors
- Size tolerance : ASTM A276/484 / DIN 1028
- Packing: Bars are packed in 500 to 1,000 kgs bundles in waterproof HDPE cloth Standard Export Seaworthy.
- Delivery: Within 60-70 Days from the order finalization
- Grades : AISI 201, 202, 204cu, 304, 304L, 316, 410, 420, 430
STAINLESS STEEL 317LN ANGLE SIZES:
| Width (mm) | Thickness (mm) | Width (Inches) | Thickness (Inches) |
|---|---|---|---|
| 20 x 20 | 3 to 5 | 3/4" | 1/8 to 1/4 |
| 25 x 25 | 3 to 5 | 1" | 1/8 to 1/4 |
| 30 x 30 | 3 to 5 | 1.1/8 | 1/8 to 1/4 |
| 32 x 32 | 3 to 6 | 1.1/4 | 1/8 to 1/4 |
| 35 x 35 | 3 to 6 | 1.3/8 | 1/8 to 1/4 |
| 38 x 38 | 3 to 6 | 1.1/2 | 1/8 to 1/4 |
| 40 x 40 | 3 to 6 | 1.5/8 | 1/8 to 1/4 |
| 45 x 45 | 3 to 6 | 1.3/4 | 1/8 to 1/4 |
| 50 x 50 | 3 to 6 | 2" | 1/8 to 1/4 |
| 60 x 60 | 5 to 6 | 2.3/8 | 3/16 to 1/4 |
| 65 x 65 | 5 to 6 | 2.1/2 | 3/16 to 1/4 |
| 70 x 70 | 5 to 6 | 2.3/4 | 3/16 to 1/4 |
| 75 x 75 | 5 to 6 | 3" | 3/16 to 1/4 |
We export our STAINLESS STEEL 317LN ANGLE products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
