UNS S41008 Angle, SS 410S Angle, AISI SS 410S Stainless Steel 410S Angle Supplier, Manufacturer and Exporter in India
Din 1.4000 SS 410S Angle, SS UNS S41008 Angle, Stainless Steel 410S Angle, 410S Stainless Steel Angle Suppliers in India.
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
STAINLESS STEEL 410S ANGLE APPLICATIONS:
Petroleum Refining and Petrochemical Processing
Columns
Distillation trays
Heat exchangers
Towers
Ore Processing
Mining machinery
Thermal Processing
Annealing boxes
Partitions
Quenching racks
Gate valves
Press plates
STAINLESS STEEL 410S ANGLE OXIDATION RESISTANCE:
Good oxidation resistance.
Can be used in continuous service up to 1300°F (705°C).
Scaling becomes excessive above 1500°F (811°C) in intermittent service.
STAINLESS STEEL 410S ANGLE CORROSION RESISTANCE:
Corrosion resistance of 410S stainless steel is similar to type 410.
Resists corrosion in atmospheric conditions, fresh water, mild organic and mineral acids, alkalis and some chemicals.
Exposure to chlorides in everyday activities (e.g., food preparation, sports activities, etc.) is satisfactory when proper cleaning is performed after exposure to use.
STAINLESS STEEL 410S ANGLE HEAT TREATMENT:
The alloy can not be hardened by heat treatment. It is annealed between 1600 – 1650°F (871 – 899°C), and then air cooled to relieve cold working stresses. 410S should not be exposed to temperatures above 2000°F (1093°C), due to embrittlement. If large grains are found after annealing mildly cold-worked material, the annealing temperature should be decreased to 1200 – 1350°F (649 – 732°C).
STAINLESS STEEL 410S ANGLE WELDING:
410S is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. 410S is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.
STAINLESS STEEL 410S ANGLE CHEMICAL PROPERTIES:-
C
Mn
Si
P
S
Cr
Ni
410S
0.08 max
1.00 max
1.00 max
0.04 max
0.03 max
min: 11.5
max: 14.5
0.60 max
STAINLESS STEEL 410S ANGLE MECHANICAL PROPERTIES:
Grade
Tensile Strength ksi (MPa) min
Yield Strength 0.2% offset ksi (MPa) min
Elongation (% in 50mm) min
Hardness (Rockwell B) MAX
410S
64.4 (444)
42 (290)
33
75
PHYSICAL PROPERTIES:
Density
lbm/in3
Thermal Conductivity
(BTU-in/hr- ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.280
187 at 212°F
23.7 at 68°F
29
6.0 at 32 – 212°F
0.11 at 68°F to 212°F
2700 to 2790
7.5 at 68 – 1200°F
WHY TO CHOOSE HARSH STEEL STAINLESS STEEL ANGLE BARS?
Corrosion resistance
Durable
Very sturdy
Easy to install
Fire and heat resistance
Rust free
Abrasion free
HARSH STEEL STAINLESS STEEL ANGLE BARS USED IN?
Architectural applications
Bridges
Transmission towers
Hoisting and conveying machinery
Ships
Industrial furnace
Reaction tower
Container frame and warehouse shelves
Multi-storied building
Fabrication
STAINLESS STEEL 410S ANGLE DETAILS:
Finish:Hot Rolled Annealed & Pickled (HRAP)
Length: 3 to 7 Meters / 12 to 24 feet
End Finish: Both ends are marked with special colors
Size tolerance : ASTM A276/484 / DIN 1028
Packing: Bars are packed in 500 to 1,000 kgs bundles in waterproof HDPE cloth Standard Export Seaworthy.
Delivery: Within 60-70 Days from the order finalization
We export our STAINLESS STEEL 410S ANGLE products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.