ASTM A789 Angle, ASME SA789 Angle, Super Duplex Steel Angles Supplier, Manufacturer and Exporter in India
Din 1.4362 Super Duplex Steel Angles, UNS S32304 Angles, Super Duplex Steel Angle, Super Duplex Steel Angles Suppliers in India.
SUPER DUPLEX STEEL UNS S32304 ANGLE GENERAL PROPERTIES:
Duplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel whose structure is a balance of ferritic and austenitic. It has general corrosion resistance similar or better than Alloys 304L and 316L but with yield strength nearly double that of austenitic stainless steels. Its duplex microstructure and low nickel and high chromium contents also allows Duplex 2304 to demonstrate improved stress corrosion resistant properties compared to 304 and 316. It is typically suitable for all applications in the -58oF to 572oF (-50oC to 300oC) temperature range and is designed to feature high mechanical strength, good weldability, good corrosion resistance, high resistance to stress corrosion cracking, good machinability, low thermal expansion, good fatigue properties, high thermal conductivity, and easy fabrication.
SUPER DUPLEX STEEL UNS S32304 ANGLE APPLICATION:
Duplex 2304 is generally used in the same applications in which Alloys 304 and 316L are used. Some examples of these applications include:
Chloride containing environments
Welded pipe systems within the Pulp and Paper, Chemical and Petrochemical, and Water Treatment industries
Transportations
Heat exchanger tubes
Architecture, building, construction
Pressure vessels
Caustic solutions, organic acids
Food industry
SUPER DUPLEX STEEL UNS S32304 ANGLE COROSSION RESISTANCE:
Due to its high chromium content of 23%, the corrosion resistance properties of Duplex 2304 are practically equivalent to those of Alloy 316L
Its duplex microstructure and low nickel and high chromium contents allows Duplex 2304 to have improved stress corrosion resistance properties compared to the 304L and 316L standard austenitic grades.
More resistant to pitting and crevice corrosion resistance that Alloy 316L
Outperforms Alloys 304L and 316L in stress corrosion cracking resistance in chloride containing aqueous solutions
Its corrosion rate in boiling nitric acid (65%) is higher than that of Alloy 316L
Its high yield strength allows Duplex 2304 to perform well in abrasion/corrosion applications
SUPER DUPLEX STEEL UNS S32304 ANGLE STRUCTURE:
Microstructure of Duplex 2304 is very stable compared to molybdenum containing duplex stainless steels
Contains approximately equal amounts of ferritic and austenitic in microstructure after annealing in a temperature about
SUPER DUPLEX STEEL UNS S32304 ANGLE WELDABILITY:
Can be successfully welded by TIG manual and automatic, PLASMA, MIG, SMAW, SAW, FCAW
Duplex microstructure renders the alloy less sensitive to hot cracking
Pre-heating and post welding is not required
Filler metal should be a balanced ferrite/austenitic type
SUPER DUPLEX STEEL UNS S32304 ANGLE MECHINABILITY:-
Exhibits improved machinability properties particularly when considering drilling
Low speeds and high feeds will minimize this alloys tendency to work harden
SUPER DUPLEX STEEL UNS S32304 ANGLE COMPOSITION:
C
Cr
Fe
Mn
Si
S
P
Ni
Cu
N
Duplex2304
0.03
max
min: 21.5
max:24.5
Bal.
2.5
max
1.0
max
0.03
max
0.04
max
min:3.0 max:3.5
min:0.05
max: 2.0
min: 0.05
max: 2.0
SUPER DUPLEX STEEL UNS S32304 ANGLE MECHANICAL PROPERTIES:
Grade
Tensile Strength ksi (MPa) min
Yield Strength 0.2% offset ksi (MPa)min
Elongation (% in 50mm) min
Hardness (Brinell)MAX
Hardness(Rockwell B)MAX
Duplex 2304
87
(600)
58
(400)
25
293
31j
SUPER DUPLEX STEEL UNS S32304 ANGLE PHYSICAL PROPERTIES:
Duplex 2304
Density at 68°F (20°C)
0.28 lbm/in3
7800 kg/cm3
Coefficient of Thermal Expansion
ax10-6°C-1
68°F to: 212°F
(20 -100°C)
13
68°F to 392°F(20 -200°C)
13.5
68°F to 572°F
(20 -300°C)
14
Thermal Conductivity
W.m-1.K-1
at 68°F
(20°C)
17
at 212°F
(100°C)
18
at 392°F
(200°C)
19
at 572°F
(300°C)
20
Electrical Resitivity
(µ_ cm)
at 68°F
(20°C)
80
at 212°F
(100°C)
92
at 392°F
(200°C)
100
at 572°F
(300°C)
105
Specific Heat
(Btu/lb/°F)
32°F to: 212°F(20 -100°C)
0.11
WHY TO CHOOSE HARSH STEEL STAINLESS STEEL ANGLE BARS?
Corrosion resistance
Durable
Very sturdy
Easy to install
Fire and heat resistance
Rust free
Abrasion free
HARSH STEEL STAINLESS STEEL ANGLE BARS USED IN?
Architectural applications
Bridges
Transmission towers
Hoisting and conveying machinery
Ships
Industrial furnace
Reaction tower
Container frame and warehouse shelves
Multi-storied building
Fabrication
SUPER DUPLEX STEEL UNS S32304 ANGLE DETAILS:
Finish:Hot Rolled Annealed & Pickled (HRAP)
Length: 3 to 7 Meters / 12 to 24 feet
End Finish: Both ends are marked with special colors
Size tolerance : ASTM A276/484 / DIN 1028
Packing: Bars are packed in 500 to 1,000 kgs bundles in waterproof HDPE cloth Standard Export Seaworthy.
Delivery: Within 60-70 Days from the order finalization
We export our SUPER DUPLEX UNS S32304 ANGLE products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.