UNS S41000 Angle, SS 410 Angle, AISI SS 410 Stainless Steel 410 Angle Supplier, Manufacturer and Exporter in India
Din 1.4006 SS 410 Angle, SS UNS S41000 Angle, Stainless Steel 410 Angle, 410 Stainless Steel Angle Suppliers in India.
STAINLESS STEEL 330 ANGLE GENERAL PROPERTIES:
Alloy 330 is an austenitic, nickel-chromium-iron-silicon alloy that has outstanding resistance to oxidation and carburization up to 2200°F with high strength. The excellent resistance to oxidation and carburization is provided by the high nickel and chromium content of the alloy, further enhanced by its silicon content. Alloy 330's ultra high nickel content of 34 to 37% also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. Alloy 330 also has a low coefficient of expansion, excellent ductility, and high strength.
STAINLESS STEEL 330 ANGLE APPLICATIONS:
Alloy 330 is extensively used in high temperature environments where resistance to the combined effects of thermal cycling and carburization is necessary. Applications include:
Chemical and Petrochemical Processing: cracked ammonia components, petrochemical furnace parts, heat exchangers, flares, etc
Thermal Processing: heat-treat furnace containers & compartments, high temperature fans, salt pots, etc
Ore Processing: perlite system and equipment
Power Generation: boiler fixtures, gas turbine components, etc
STAINLESS STEEL 330 ANGLE VALUE ADDED SERVICES:
Need a special length?
We can custom level 3/8″ thick x 72″ x 186″ from our plate line to reduce scrap
Polish plate inventory available
We supply #4, #6, and #8 mirror finish
Special polishes available
Plate processing
Dynamic water jet cutting
Plate shearing
Saw cutting
Plasma cutting and high quality plasma cutting
Machine cut rings and discs
STAINLESS STEEL 330 ANGLE CORROSION RESISTANCE:
Provides high level of corrosion resistance especially with regards to oxidation, carburization, and nitridation
Has great oxidation resistance and resists scale formation up to about 2000°F due to its chromium and nickel content
Excellent resistance to carburization due to its 34 to 37% nickel and silicon content
Exhibits resistance to nitrogen containing atmospheres where the oxygen content is low
High nickel content also makes it highly resistant to chloride stress corrosion cracking and sigma phase embrittlement
STAINLESS STEEL 330 ANGLEHARDENING:
Alloy 330 will not respond to heat treatment; will only harden upon cold work
STAINLESS STEEL 330 ANGLE MACHINABILITY:
Rigid mounts, sulfurized lubricants, positive feeds and slow speeds are recommended for machining grade 330 stainless steel.
STAINLESS STEEL 330 ANGLE WELDING:
Grade 330 stainless steel can be welded using GAW techniques.
STAINLESS STEEL 330 ANGLE HOT WORKING:
Hot working of grade 330 stainless steel can be performed at 1149 to 1177°C (2100 to 2150°F).
STAINLESS STEEL 330 ANGLE COLD WORKING:
It is difficult to perform cold working in grade 330 stainless steel as the steel has high strength and work hardening rate. However, this steel can be cold worked using strong forces.
STAINLESS STEEL 330 ANGLE ANEALING:
Grade 330 stainless steel can be annealed at 1121 to 1204°C (2050 to 2200°F).
STAINLESS STEEL 330 ANGLE CHEMICAL PROPERTIES:
Element
Average Nominal %
Chromium
18.00 – 22.00
Nickel
34.00 37.00
Carbon
0.08 Max
Silicon
1.00 – 1.50
Manganese
2.00 Max
Phosphorus
0.03 Max
Sulfur
0.03 Max
Copper
1.00 Max
Iron
Balance
STAINLESS STEEL 330 ANGLE MECHANICAL PROPERTIES:
Tensile Strength – ksi (min.)
0.2% Offset Yield Strength – ksi (min.)
Elongation in 2 inches – % (min.)
Hardness – Rockwell B
70
30
30
90
STAINLESS STEEL 330 ANGLE PHYSICAL PROPERTIES:
Density
(lb. / cu. in.)
Specific Gravity
Specific Heat
(Btu/lb Deg F – [32-212 Deg F])
Magnetic Permeability
Modulus of Elasticity Tension
0.289
7.99
0.11
1.02
28.5
WHY TO CHOOSE HARSH STEEL STAINLESS STEEL ANGLE BARS?
Corrosion resistance
Durable
Very sturdy
Easy to install
Fire and heat resistance
Rust free
Abrasion free
HARSH STEEL STAINLESS STEEL ANGLE BARS USED IN?
Architectural applications
Bridges
Transmission towers
Hoisting and conveying machinery
Ships
Industrial furnace
Reaction tower
Container frame and warehouse shelves
Multi-storied building
Fabrication
STAINLESS STEEL 330 ANGLE DETAILS:
Finish:Hot Rolled Annealed & Pickled (HRAP)
Length: 3 to 7 Meters / 12 to 24 feet
End Finish: Both ends are marked with special colors
Size tolerance : ASTM A276/484 / DIN 1028
Packing: Bars are packed in 500 to 1,000 kgs bundles in waterproof HDPE cloth Standard Export Seaworthy.
Delivery: Within 60-70 Days from the order finalization
We export our STAINLESS STEEL 330 ANGLE products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.