UNS S17700 Square Tubes, Precipitation Hardening SS 17-7PH Square Tubes, AISI SS 17-7PH Stainless Steel 17-7PH Square Tubes Supplier, Manufacturer and Exporter in India
Din 1.4568 SS 17-7PH Square Tubes, SS UNS S17700 Square Tubes, Precipitation Hardening Stainless Steel 17-7PH Square Tubes, Precipitation Hardening Stainless Steel 17-7PH Square Tubes Suppliers in India.
17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.
Below you will find typical applications of 17-4 PH stainless steel as well as the metals composition and mechanical properties. Learn more about or value added services that we offer to help you expedite the current job you have at hand.
Best Stainless offers high quality standards including: UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.
17-4 PH stainless steel can be used for a variety of applications including: pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, columbian + tantalum, copper, manganese, nickel, phosphorous, silicon, and sulfur.
APPLICATIONS
- Pump Shafts
- Oil Patch
- Mechanical Seals
- Aerospace
COMPOSITION
- Carbon 0.070 max
- Chromium 15.00 - 17.50
- Columbian + Tantalum 0.15 - 0.45
- Copper 3.00 - 5.00
- Manganese1.00 max
- Nickel 3.00 - 5.00
- Phosphorus 0.040 max
- Silicon 1.00 max
- Sulfur 0.030 max
STANDARD
- UNS S17400
- AMS 5643
- ASTM A564
- ASTM A693 Grade 630
17-4PH SS MECHANICAL PROPERTIES
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
|---|---|---|---|---|---|---|---|
| 17-4 PH | H900 | 190,000 | 170,000 | 10 | 40 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 12 | 45 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 13 | 45 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 16 | 50 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 18 | 55 | 255 | C24 | |
| H1150-D | 125,000 | 105,000 | 16 | 50 | 255 min - 311 max | C24 - 33 |
SQUARE TUBES PRODUCT OVERVIEW:-
| Stainless Steel Square Tube | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST) |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:-
- X = Stocked Item
- P = Call For availability square bar can be cut to size.
- Square bar can be polished per customer specifications.
- Square bar is stocked in Penn met 2000 for improved machinability.
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.120 | 1.440 | X | X | X | P |
| 1/4″ | 0.210 | 2.52 | X | X | X | P |
| 5/16″ | 0.330 | 3.96 | X | X | X | X |
| 3/8″ | 0.480 | 5.76 | X | X | X | X |
| 7/16″ | 0.650 | 7.80 | X | X | X | X |
| 1/2″ | 0.850 | 10.20 | X | X | X | X |
| 9/16″ | 1.080 | 12.96 | X | X | X | X |
| 5/8″ | 1.330 | 15.96 | X | X | X | X |
| 3/4″ | 1.910 | 22.92 | X | X | X | X |
| 7/8″ | 2.610 | 31.32 | X | X | X | X |
| 1″ | 3.400 | 40.80 | X | X | X | X |
| 1-1/8″ | 4.310 | 51.72 | X | X | X | X |
| 1-1/4″ | 5.320 | 63.84 | X | X | X | X |
| 1-3/8″ | 6.400 | 76.80 | X | X | X | X |
| 1-1/2″ | 7.600 | 91.20 | X | X | X | X |
| 1-3/4″ | 10.400 | 124.80 | X | X | X | X |
| 2″ | 13.600 | 163.20 | X | X | X | X |
| 2-1/4″ | 17.200 | 206.40 | X | X | X | X |
| 2-1/2″ | 21.300 | 255.60 | X | X | X | X |
| 3″ | 30.63 | 367.56 | X | X | X | P |
| 4″ | 54.40 | 652.80 | X | X | X | P |
PROCESSING:-
Customers can select a number of processing options to produce stainless steel tubes to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
| Long Product Processing Services Overview | |
|---|---|
| Square Tube Cutting | Products cut include Round Tube, Flat bar, Hex bar, Square bar, Tubing and Hollow Tube, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
| Square Tube Production Cutting | Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
| Square Tube Polishing | Products polished included all tubular products, with OD & ID polishing available, Round Tube, Square Tube, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes. |
TOLERANCES FOR COLD AND HOT SQUARE TUBESS
COLD FINISHED SQUARE TUBES TOLERANCES:
| CF Tolerances | Plus | Minus |
|---|---|---|
| 1/8″ to 5/16″ (exclusive) | 0.000 | 0.002 |
| 5/16″ to 1/2″ (exclusive) | 0.000 | 0.003 |
| 1/2″ to 1″ (inclusive) | 0.000 | 0.004 |
| over 1″ to 2″ (inclusive) | 0.000 | 0.006 |
| over 2″ to 3″ (inclusive) | 0.000 | 0.008 |
COLD FINISHED SQUARE TUBES STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE TUBES TOLERANCES:
| HF Tolerances | Plus | Minus | Out of Sq |
|---|---|---|---|
| Over 7/8″ to 1″ (inclusive) | 0.009 | 0.009 | 0.013 |
| Over 1″ to 1-1/8″ (inclusive) | 0.010 | 0.010 | 0.015 |
| Over 1-1/8″ to 1-1/4″ (inclusive) | 0.011 | 0.011 | 0.016 |
| Over 1-1/4″ to 1-3/8″ (inclusive) | 0.012 | 0.012 | 0.018 |
| Over 1-3/8″ to 1-1/2″ (inclusive) | 0.014 | 0.014 | 0.021 |
| Over 1-1/2″ to 2″ (inclusive) | 1/64 | 1/64 | 0.023 |
HOT FINISHED SQUARE TUBES STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE TUBES SPECIFICATIONS:
| Stainless Steel Square Tube Specifications | |
|---|---|
| ASTM A276 | This specification encompasses cold-finished or hot-finished tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
| ASTM A479 | This specification includes cold and hot finished stainless steel tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
| ASTM A484 | This specification includes wrought stainless steel tubes, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
| ASTM A582 | This specification includes cold or hot finished tubes, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
| ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
We export our PRECIPITATION HARDENING STAINLESS STEEL 17-4PH SQUARE TUBES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
