Stainless Steel 317L Square Tubes, UNS S31703 Square Tubes Supplier & Exporter

STAINLESS STEEL 317L SQUARE TUBES GENERAL PROPERTIES:

317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.

STAINLESS STEEL 317L SQUARE TUBES APPLICATIONS:

• Flue-gas desulfurization systems
• Chemical process vessels
• Petrochemical
• Pulp and Paper
• Condensers in power generation

STAINLESS STEEL 317L SQUARE TUBES CORROSION PROPERTIES:

317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.

STAINLESS STEEL 317L SQUARE TUBES WELDING:

317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

STAINLESS STEEL 317L SQUARE TUBES CHARACTERISTICS:

• Improved general and localized corrosion to 316L stainless
• Good formability
• Good weldability

STAINLESS STEEL 317L SQUARE TUBES CHEMICAL PROPERTIES:

Ni	Cr	Mo	Mn	Si
11.0 - 15.0	18.0 - 20.0	3.0 - 4.0	2.0 Max	.75 Max
C	N	S	P	Fe
0.03 Max	0.1 Max	0.03 Max	0.045 Max	Balance

STAINLESS STEEL 317L SQUARE TUBES MECHANICAL PROPERTIES:

Ultimate Tensile Strength, ksi Minimum	.2% Yield Strength, ksi Minimum	Elongation Percent	Hardness Max.
75	30	35	217 Brinell

STAINLESS STEEL 317L SQUARE TUBES PRODUCT OVERVIEW:

Stainless Steel Square Tube
Thickness Range of Stainless Plate	3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST)
Grades	202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available

STAINLESS STEEL 317L SQUARE TUBES INVENTORY:

• X = Stocked Item
• P = Call For availability square bar can be cut to size.
• Square bar can be polished per customer specifications.
• Square bar is stocked in Penn met 2000 for improved machinability.

Size in Inches	Wt per Ft	Wt per 12′	303	304/L	316/L	416
3/16″	0.120	1.440	X	X	X	P
1/4″	0.210	2.52	X	X	X	P
5/16″	0.330	3.96	X	X	X	X
3/8″	0.480	5.76	X	X	X	X
7/16″	0.650	7.80	X	X	X	X
1/2″	0.850	10.20	X	X	X	X
9/16″	1.080	12.96	X	X	X	X
5/8″	1.330	15.96	X	X	X	X
3/4″	1.910	22.92	X	X	X	X
7/8″	2.610	31.32	X	X	X	X
1″	3.400	40.80	X	X	X	X
1-1/8″	4.310	51.72	X	X	X	X
1-1/4″	5.320	63.84	X	X	X	X
1-3/8″	6.400	76.80	X	X	X	X
1-1/2″	7.600	91.20	X	X	X	X
1-3/4″	10.400	124.80	X	X	X	X
2″	13.600	163.20	X	X	X	X
2-1/4″	17.200	206.40	X	X	X	X
2-1/2″	21.300	255.60	X	X	X	X
3″	30.63	367.56	X	X	X	P
4″	54.40	652.80	X	X	X	P

STAINLESS STEEL 317L SQUARE TUBES PROCESSING:

Customers can select a number of processing options to produce stainless steel tubes to their exact specifications, reducing materiel costs, production time, scrap and internal handling.

Long Product Processing Services Overview
Square Tube Cutting	Products cut include Round Tube, Flat bar, Hex bar, Square bar, Tubing and Hollow Tube, Pipe, Angles, channels, Beams and Tees.  Thickness range is 1/16″ to 28″ diameter
Square Tube Production Cutting	Penn Stainless can provide production cutting for product diameters up to 4″.  We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Square Tube Polishing	Products polished included all tubular products, with OD & ID polishing available, Round Tube, Square Tube, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes.

TOLERANCES FOR COLD AND HOT STAINLESS STEEL 317L SQUARE TUBES:

COLD FINISHED STAINLESS STEEL 317L SQUARE TUBES TOLERANCES:

CF Tolerances	Plus	Minus
1/8″ to 5/16″ (exclusive)	0.000	0.002
5/16″ to 1/2″ (exclusive)	0.000	0.003
1/2″ to 1″ (inclusive)	0.000	0.004
over 1″ to 2″ (inclusive)	0.000	0.006
over 2″ to 3″ (inclusive)	0.000	0.008

COLD FINISHED SQUARE TUBES STRAIGHTNESS TOLERANCES:

CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)

HOT FINISHED STAINLESS STEEL 317L SQUARE TUBES TOLERANCES:

HF Tolerances	Plus	Minus	Out of Sq
Over 7/8″ to 1″ (inclusive)	0.009	0.009	0.013
Over 1″ to 1-1/8″ (inclusive)	0.010	0.010	0.015
Over 1-1/8″ to 1-1/4″ (inclusive)	0.011	0.011	0.016
Over 1-1/4″ to 1-3/8″ (inclusive)	0.012	0.012	0.018
Over 1-3/8″ to 1-1/2″ (inclusive)	0.014	0.014	0.021
Over 1-1/2″ to 2″ (inclusive)	1/64	1/64	0.023

HOT FINISHED STAINLESS STEEL 317L SQUARE TUBES STRAIGHTNESS TOLERANCES:

HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)

STAINLESS STEEL 317L SQUARE TUBES SPECIFICATIONS:

Stainless Steel Square Tube Specifications
ASTM A276	This specification encompasses cold-finished or hot-finished tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.
ASTM A479	This specification includes cold and hot finished stainless steel tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels.
ASTM A484	This specification includes wrought stainless steel tubes, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions.
ASTM A582	This specification includes cold or hot finished tubes, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels.
ASTM B473	This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition.

---

Enquiry

---