UNS S41008 Square Tubes, SS 410S Square Tubes, AISI SS 410S Stainless Steel 410S Square Tubes Supplier, Manufacturer and Exporter in India
Din 1.4000 SS 410S Square Tubes, SS UNS S41008 Square Tubes, Stainless Steel 410S Square Tubes, 410S Stainless Steel Square Tubes Suppliers in India.
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
STAINLESS STEEL 410S SQUARE TUBES APPLICATIONS:
- Petroleum Refining and Petrochemical Processing
- Columns
- Distillation trays
- Heat exchangers
- Towers
- Ore Processing
- Mining machinery
- Thermal Processing
- Annealing boxes
- Partitions
- Quenching racks
- Gate valves
- Press plates
STAINLESS STEEL 410S SQUARE TUBES OXIDATION RESISTANCE:
- Good oxidation resistance.
- Can be used in continuous service up to 1300°F (705°C).
- Scaling becomes excessive above 1500°F (811°C) in intermittent service.
STAINLESS STEEL 410S SQUARE TUBES CORROSION RESISTANCE:
- Corrosion resistance of 410S stainless steel is similar to type 410.
- Resists corrosion in atmospheric conditions, fresh water, mild organic and mineral acids, alkalis and some chemicals.
- Exposure to chlorides in everyday activities (e.g., food preparation, sports activities, etc.) is satisfactory when proper cleaning is performed after exposure to use.
STAINLESS STEEL 410S SQUARE TUBES HEAT TREATMENT:
The alloy can not be hardened by heat treatment. It is annealed between 1600 – 1650°F (871 – 899°C), and then air cooled to relieve cold working stresses. 410S should not be exposed to temperatures above 2000°F (1093°C), due to embrittlement. If large grains are found after annealing mildly cold-worked material, the annealing temperature should be decreased to 1200 – 1350°F (649 – 732°C).
STAINLESS STEEL 410S SQUARE TUBES WELDING:
410S is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. 410S is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.
STAINLESS STEEL 410S SQUARE TUBES CHEMICAL PROPERTIES:
| C | Mn | Si | P | S | Cr | Ni | |
|---|---|---|---|---|---|---|---|
| 410S | 0.08 max | 1.00 max | 1.00 max | 0.04 max | 0.03 max | min: 11.5 max: 14.5 |
0.60 max |
STAINLESS STEEL 410S SQUARE TUBES MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Rockwell B) MAX |
|---|---|---|---|---|
| 410S | 64.4 (444) | 42 (290) | 33 | 75 |
STAINLESS STEEL 410S SQUARE TUBES PHYSICAL PROPERTIES:
| Density lbm/in3 |
Thermal Conductivity (BTU-in/hr- ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.280 | 187 at 212°F | 23.7 at 68°F | 29 | 6.0 at 32 – 212°F | 0.11 at 68°F to 212°F | 2700 to 2790 |
| 7.5 at 68 – 1200°F |
STAINLESS STEEL 410S SQUARE TUBES PRODUCT OVERVIEW:
| Stainless Steel Square Tube | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST) |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
STAINLESS STEEL 410S SQUARE TUBES INVENTORY:
- Y = Stocked Item
- H = Call For availability square bar can be cut to size.
- Square bar can be polished per customer specifications.
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.120 | 1.440 | X | X | X | H |
| 1/4″ | 0.210 | 2.52 | Y | Y | Y | H |
| 5/16″ | 0.330 | 3.96 | Y | Y | Y | Y |
| 3/8″ | 0.480 | 5.76 | Y | Y | Y | Y |
| 7/16″ | 0.650 | 7.80 | Y | Y | Y | Y |
| 1/2″ | 0.850 | 10.20 | Y | Y | Y | Y |
| 9/16″ | 1.080 | 12.96 | Y | Y | Y | Y |
| 5/8″ | 1.330 | 15.96 | Y | Y | Y | Y |
| 3/4″ | 1.910 | 22.92 | Y | Y | Y | Y |
| 7/8″ | 2.610 | 31.32 | Y | Y | Y | Y |
| 1″ | 3.400 | 40.80 | Y | Y | Y | Y |
| 1-1/8″ | 4.310 | 51.72 | Y | Y | Y | Y |
| 1-1/4″ | 5.320 | 63.84 | Y | Y | Y | Y |
| 1-3/8″ | 6.400 | 76.80 | Y | Y | Y | Y |
| 1-1/2″ | 7.600 | 91.20 | Y | Y | Y | Y |
| 1-3/4″ | 10.400 | 124.80 | Y | Y | Y | Y |
| 2″ | 13.600 | 163.20 | Y | Y | Y | Y |
| 2-1/4″ | 17.200 | 206.40 | Y | Y | Y | Y |
| 2-1/2″ | 21.300 | 255.60 | Y | Y | Y | Y |
| 3″ | 30.63 | 367.56 | Y | Y | Y | H |
| 4″ | 54.40 | 652.80 | Y | Y | Y | H |
STAINLESS STEEL 410S SQUARE TUBES PROCESSING:
Customers can select a number of processing options to produce stainless steel tubes to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
| Long Product Processing Services Overview | |
|---|---|
| Square Tube Cutting | Products cut include Round Tube, Flat bar, Hex bar, Square bar, Tubing and Hollow Tube, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
| Square Tube Production Cutting | Harsh Steel can provide production cutting for product diameters up to 6″. |
| Square Tube Polishing | Products polished included all tubular products, with OD & ID polishing available, Round Tube, Square Tube, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes. |
TOLERANCES FOR COLD AND HOT STAINLESS STEEL 410S SQUARE TUBES:
COLD FINISHED STAINLESS STEEL 410S SQUARE TUBES TOLERANCES:
| CF Tolerances | Plus | Minus |
|---|---|---|
| 1/8″ to 5/16″ (exclusive) | 0.000 | 0.002 |
| 5/16″ to 1/2″ (exclusive) | 0.000 | 0.003 |
| 1/2″ to 1″ (inclusive) | 0.000 | 0.004 |
| over 1″ to 2″ (inclusive) | 0.000 | 0.006 |
| over 2″ to 3″ (inclusive) | 0.000 | 0.008 |
COLD FINISHED STAINLESS STEEL 410S SQUARE TUBES STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 Y (length in ft/5)
HOT FINISHED SQUARE TUBES TOLERANCES:
| HF Tolerances | Plus | Minus | Out of Sq |
|---|---|---|---|
| Over 7/8″ to 1″ (inclusive) | 0.009 | 0.009 | 0.013 |
| Over 1″ to 1-1/8″ (inclusive) | 0.010 | 0.010 | 0.015 |
| Over 1-1/8″ to 1-1/4″ (inclusive) | 0.011 | 0.011 | 0.016 |
| Over 1-1/4″ to 1-3/8″ (inclusive) | 0.012 | 0.012 | 0.018 |
| Over 1-3/8″ to 1-1/2″ (inclusive) | 0.014 | 0.014 | 0.021 |
| Over 1-1/2″ to 2″ (inclusive) | 1/64 | 1/64 | 0.023 |
HOT FINISHED STAINLESS STEEL 410S SQUARE TUBES STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE TUBES SPECIFICATIONS:
| Stainless Steel Square Tube Specifications | |
|---|---|
| ASTM A276 | This specification encompasses cold-finished or hot-finished tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
| ASTM A479 | This specification includes cold and hot finished stainless steel tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
| ASTM A484 | This specification includes wrought stainless steel tubes, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
| ASTM A582 | This specification includes cold or hot finished tubes, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
| ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
We export our STAINLESS STEEL 410S SQUARE TUBES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
