UNS S40500 Square Tubes, SS 405 Square Tubes, AISI SS 405 Stainless Steel 405 Square Tubes Supplier, Manufacturer and Exporter in India
Din 1.4002 SS 405 Square Tubes, SS UNS S40500 Square Tubes, Stainless Steel 405 Square Tubes, 405 Stainless Steel Square Tubes Suppliers in India.
GENERAL PROPERTIES:-
Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
Specifications: UNS S40500
APPLICATIONS:-
Applications that frequently use alloy 405 include, but are not limited to:
- Steam nozzles
- Partitions
- Annealing boxes
- Quenching racks
- Fabrications that cannot be annealed after welding
CORROSION RESISTANCE:
- Same corrosion resistance of Type 410 Steel
- Used in situations where more weldability is desired than Type 410
MACHINABILITY
- Type 405 can be easily machined due to its soft and ductile characteristics
WELDABILITY
- Can be welded using shielded fusion and resistance techniques
- Oxyacetylene is not recommended
- Post weld annealing will maximize ductility
CHEMICAL PROPERTIES:-
| C | Cr | Fe | Mn | Si | S | P | Ni | Al | |
|---|---|---|---|---|---|---|---|---|---|
| 405 | 0.08 max |
min: 11.5 max: 14.5 |
balance |
1.0 max |
1.0 max |
0.03 max |
0.04 max |
0.50 max |
min: 0.1 max: 0.3 |
MECHANICAL PROPERTIES:
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
|---|---|---|---|---|---|
| 405 |
60 (415) |
25 (170) |
20 | 179 | 88 |
PHYSICAL PROPERTIES:
| Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
|---|---|---|---|---|---|
| at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
| 0.279 | 9.2 | 20.5 | 416 | 0.11 | 28 x 106 |
SQUARE TUBES PRODUCT OVERVIEW:-
| Stainless Steel Square Tube | |
|---|---|
| Thickness Range of Stainless Plate | 3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST) |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:-
- X = Stocked Item
- P = Call For availability square bar can be cut to size.
- Square bar can be polished per customer specifications.
- Square bar is stocked in Penn met 2000 for improved machinability.
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.120 | 1.440 | X | X | X | P |
| 1/4″ | 0.210 | 2.52 | X | X | X | P |
| 5/16″ | 0.330 | 3.96 | X | X | X | X |
| 3/8″ | 0.480 | 5.76 | X | X | X | X |
| 7/16″ | 0.650 | 7.80 | X | X | X | X |
| 1/2″ | 0.850 | 10.20 | X | X | X | X |
| 9/16″ | 1.080 | 12.96 | X | X | X | X |
| 5/8″ | 1.330 | 15.96 | X | X | X | X |
| 3/4″ | 1.910 | 22.92 | X | X | X | X |
| 7/8″ | 2.610 | 31.32 | X | X | X | X |
| 1″ | 3.400 | 40.80 | X | X | X | X |
| 1-1/8″ | 4.310 | 51.72 | X | X | X | X |
| 1-1/4″ | 5.320 | 63.84 | X | X | X | X |
| 1-3/8″ | 6.400 | 76.80 | X | X | X | X |
| 1-1/2″ | 7.600 | 91.20 | X | X | X | X |
| 1-3/4″ | 10.400 | 124.80 | X | X | X | X |
| 2″ | 13.600 | 163.20 | X | X | X | X |
| 2-1/4″ | 17.200 | 206.40 | X | X | X | X |
| 2-1/2″ | 21.300 | 255.60 | X | X | X | X |
| 3″ | 30.63 | 367.56 | X | X | X | P |
| 4″ | 54.40 | 652.80 | X | X | X | P |
PROCESSING:-
Customers can select a number of processing options to produce stainless steel tubes to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
| Long Product Processing Services Overview | |
|---|---|
| Square Tube Cutting | Products cut include Round Tube, Flat bar, Hex bar, Square bar, Tubing and Hollow Tube, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
| Square Tube Production Cutting | Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
| Square Tube Polishing | Products polished included all tubular products, with OD & ID polishing available, Round Tube, Square Tube, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes. |
TOLERANCES FOR COLD AND HOT SQUARE TUBESS
COLD FINISHED SQUARE TUBES TOLERANCES:
| CF Tolerances | Plus | Minus |
|---|---|---|
| 1/8″ to 5/16″ (exclusive) | 0.000 | 0.002 |
| 5/16″ to 1/2″ (exclusive) | 0.000 | 0.003 |
| 1/2″ to 1″ (inclusive) | 0.000 | 0.004 |
| over 1″ to 2″ (inclusive) | 0.000 | 0.006 |
| over 2″ to 3″ (inclusive) | 0.000 | 0.008 |
COLD FINISHED SQUARE TUBES STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE TUBES TOLERANCES:
| HF Tolerances | Plus | Minus | Out of Sq |
|---|---|---|---|
| Over 7/8″ to 1″ (inclusive) | 0.009 | 0.009 | 0.013 |
| Over 1″ to 1-1/8″ (inclusive) | 0.010 | 0.010 | 0.015 |
| Over 1-1/8″ to 1-1/4″ (inclusive) | 0.011 | 0.011 | 0.016 |
| Over 1-1/4″ to 1-3/8″ (inclusive) | 0.012 | 0.012 | 0.018 |
| Over 1-3/8″ to 1-1/2″ (inclusive) | 0.014 | 0.014 | 0.021 |
| Over 1-1/2″ to 2″ (inclusive) | 1/64 | 1/64 | 0.023 |
HOT FINISHED SQUARE TUBES STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE TUBES SPECIFICATIONS:
| Stainless Steel Square Tube Specifications | |
|---|---|
| ASTM A276 | This specification encompasses cold-finished or hot-finished tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
| ASTM A479 | This specification includes cold and hot finished stainless steel tubes, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
| ASTM A484 | This specification includes wrought stainless steel tubes, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
| ASTM A582 | This specification includes cold or hot finished tubes, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
| ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
We export our STAINLESS STEEL 405 SQUARE TUBES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
