ASTM B473 Hex Bars, ASME SB473 Hexagon Bars, Alloy 20 Round Bars Supplier, Manufacturer and Exporter in India
Din 2.4660 Alloy 20 Hexagon Bars, UNS N08020 Round Bars, Alloy 20 Threaded Rods, Alloy 20 Cold Drawn Bars Suppliers in India.
GENERAL PROPERTIES
Alloy 20 (UNS N08020) is an austenitic, nickel-iron-chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. It is also stabilized with Columbium to minimize carbide precipitation during welding. Alloy 20 appears to fall between both the stainless and nickel categories as it contains characteristics of both. It was designed for maximum resistance to acid attack and demonstrates superior resistance to stress-corrosion cracking in boiling 20% to 40% sulfuric acid, and also has excellent general corrosion resistance to sulfuric acid and to chloride stress corrosion cracking. Alloy 20 has good mechanical properties at both ambient and elevated temperatures, up to approximately
930°F (500°C) and is readily fabricated by usual industrial processes.
APPLICATIONS
Alloy 20 was originally designed for use in sulfuric acid related applications; however, it is now frequently used in a wide variety of industries. Applications that commonly use Alloy 20 include:
Chemical and allied industries
Food and dye production
Heat exchangers
Explosives
Tanks
Valves
Pickling racks
Manufacture of synthetic rubber and plastics
Pharmaceuticals
SO2 scrubbers and other severe environments
CORROSION RESISTANCE
Excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids.
Nickel content aids in chloride ion stress and corrosion resistance.
Additions of Copper and Molybdenum provide resistance to hostile environments, pitting, and crevice corrosion.
Chromium adds to its resistance of oxidizing environments such as nitric acids.
Columbium reduces the effects of carbide precipitation.
WELDABILITY
All commonly used welding methods, with the exception of oxyacetylene, can be successfully used.
The presence of Columbium tends to minimize the precipitation of carbides in the heat-affected zone, so the material may be used in the as-welded condition in most cases.
Pre-heating is not required.
HEAT TREAMENT
Cannot be hardened by heat treatment.
Stabilized-annealing is done at 1750-1850°F, followed by water quenching.
Stress relieving can be performed on annealed material up to 950°F.
PROCESSING - HOT FORMING
Heat uniformly to a starting temperature of 2100-2225°F. Finish forging before the stock drops below 1800°F.
In order to stabilize the material after hot working operations, reheat at 1750-1850°F for a minimum of 1/2-hour per one inch of thickness and water quench.
PROCESSING - COLD FORMING
Alloy 20 has good cold formability. Bending, drawing and pressing, and other forming operations that occur in the production of fabricated items are readily performed.
Alloy 20 can normally be press brake bent over a radius twice the materials thickness.
After cold reductions of more than 15%, a final stabilizing annealing is often required.
MACHINABILITY
Because of Alloy 20′s high work-hardening rate the following are required:
Only low surface-cutting speeds are possible compared with low-alloy standard austenitic stainless steel.
Tools should be engaged at all times.
Heavy feeds are important in getting below the work-hardened 'skin'.
CHEMICAL PROPERTIES:
TYPE
C
Cr
Cu
Fe
Mn
Mo
Ni
P
Si
S
Nb
(Cb)
Alloy 20
UNS
N08020
0.07
max
min: 19.00
max: 21.00
min: 3.00
max: 4.00
Balance
2.00
max
min: 2.00
max: 3.00
min: 32.00
max: 38.00
0.045
max
1.00
max
0.035
max
8 XC min
1.00 max
MECHANICAL PROPERTIES:
Stabilized-Annealed Condition
Product Form
Tensile
Strength, ksi (min)
Yield
Strength, 0.2% offset ksi (min)
Elongation % (min)
Reduction of Area
% (min)
Hardness
Brinell (max)
Hardness
Rockwell B (max)
Plate, Sheet
80
35
30
—
217
95
Bar
80
35
30
50
—
—
PHYSICAL PROPERTIES:
Density
Specific Gravity
Specific Heat
at 32 to 212°F
Electrical Resistivity
at 68°F
Poissons Ratio
Magnetic Permeability
at 68°F
Modulus of Elasticity
at 68°F
0.292 lbs/in3
8.08
0.12 BTU/lb/°F
644 ohm-cir mil/ft
0.31
1.002 Mu
29.3 x 106 psi
HEX BARS PRODUCT OVERVEIW
Stainless Steel Hex Bar
Thickness Range of Flat Bar
3/16″ thru 3″ Larger sizes available upon request
Grades
202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
INVENTORY:
Size in Inches
Wt per Ft
Wt per 12′
303
304/L
316/L
416
3/16″
0.104
1.248
X
X
X
X
1/4″
0.180
2.160
X
X
X
X
5/16″
0.290
3.480
X
X
X
X
3/8″
0.410
4.920
X
X
X
X
7/16″
0.560
6.72
X
X
X
X
1/2″
0.740
8.880
X
X
X
X
9/16″
0.930
11.16
X
X
X
X
5/8″
1.150
13.80
X
X
X
X
11/16″
1.390
16.68
X
X
X
3/4″
1.660
19.92
X
X
X
X
13/16″
1.950
23.40
X
X
X
7/8″
2.300
27.60
X
X
X
X
15/16″
2.600
31.20
X
X
X
X
1″
2.90
34.80
X
X
X
X
1-1/16″
3.30
39.60
X
X
X
X
1-1/8″
3.700
44.40
X
X
X
X
1-1/4″
4.600
55.20
X
X
X
X
1-5/16″
5.100
61.20
X
X
X
1-3/8″
5.600
67.20
X
X
X
X
1-7/16″
6.100
73.20
X
X
X
1-1/2″
6.600
79.20
X
X
X
X
1-5/8″
7.800
93.60
X
X
X
1-3/4″
9.030
108.36
X
X
X
X
1-7/8″
10.400
124.80
X
X
X
X
2″
11.80
141.60
X
X
X
X
2-1/4″
14.920
179.04
X
X
X
X
2-3/8″
16.920
203.04
X
X
X
2-1/2″
18.42
221.04
X
X
X
X
3″
26.53
318.36
X
X
X
X
STAINLESS STEEL BAR VALUE ADDED OPTIONS:
Stainless Steel Bar Value Added Options
Stainless Steel Bar Polishing
Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided.
Heatreating & Annealing
Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application
Positive Material Identification (PMI)
Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.
UT Testing
In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement.
Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
Rapid cut of round bar 5/8″ thru 4″ dia
Larger stainless bar cutting thru 26″ in diameter
Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
Grinding and polishing available upon request
Special heat treat requirements can also be supplied. Ask for details.
Stainless round bars can also be polished or center-less ground to exact tolerances.
We export our ALLOY 20 HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.