UNS S31000 Hex Bars, SS 310 Hexagon Bars, AISI SS 310 Stainless Steel 310 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4840 SS 310 Hexagon Bars, SS UNS S31000 Round Bars, Stainless Steel 310 Threaded Rods, 310 Stainless Steel 310 Cold Drawn Bars Suppliers in India.
GENERAL PROPERTIES
Alloy is an austenitic stainless steel that combines excellent high temperature properties with good ductility and weldability. It is typically used for elevated temperature applications as its high chromium and nickel content provide solid corrosion resistance, excellent resistance to oxidation, and superior strength in temperatures up to 2100°F. Due to its high chromium and nickel content, it is superior to 304 or 309 stainless in most environments.
APPLICATIONS
The higher alloyed stainless steels generally have excellent strength at elevated temperatures along with outstanding resistance to creep deformation and environmental attack. Therefore, Alloy 310 is used widely in industries such as heat treatment and chemical processing. Some examples include:
Furnace Parts
Oil Burner Parts
Heat Exchangers
Welding Filler Wire and Electrodes
Annealing Covers
Combustion Tubes
Fire Box Sheets
VALUE ADDED SERVICES
Need a special length?
We can custom level 3/8″ thick x 72″ x 186″ from our plate line to reduce scrap
Polish plate inventory available
We supply #4, #6, and #8 mirror finish
Special polishes available
Plate processing
Dynamic water jet cutting
Plate shearing
Saw cutting
Plasma cutting and high quality plasma cutting
Machine cut rings and discs
Penn Stainless Alloy 310 Plate and Processed Flat Bar provides superior resistance to corrosion and heat exposure, in even the most demanding environments.
CORROSION RESISTANCE
Provides excellent corrosion resistance
High chromium content allows for good aqueous corrosion resistance
Excellent resistance at normal temperatures and also has good resistance to oxidizing and carburizing atmospheres
HEAT RESISTANCE
Good resistance to oxidation in intermittent service in air at temperatures up to 1040°C and 1150°C in continuous service.
Good resistance to thermal fatigue and cyclic heating.
Widely used where sulphur dioxide gas is encountered at elevated temperatures.
Continuous use in 425-860°C range not recommended due to carbide precipitation, if subsequent aqueous corrosion resistance is needed
Generally used at temperatures starting from about 800 or 900°C – above the temperatures at which 304H and 321 are effective.
FABRICATION
Commonly used in the heat treatment and process industries due to high temperature and corrosive environments
Often fabricated into complex structures
Roller-forms, stamps and draws readily
Because 310 work hardens, severe forming operations should be followed by an anneal
WELDABILITY
Austenitic stainless steel is generally considered to be weldable
Generally considered to have weldability equivalent to 304 and 304L
Special consideration is needed to compensate for a higher coefficient of thermal expansion to avoid warping and distortion
CHEMICAL PROPERTIES:
%
Cr
Ni
C
Si
Mn
P
S
Mo
Cu
Fe
310
min: 24.0
max:26.0
min: 19.0
max: 22.0
0.25
0.75
2.0
0.045
0.030
0.75
0.5
balance
310S
min: 24.0
max: 26.0
min: 19.0
max: 22.0
0.08
1.00
2.0
0.045
0.030
0.75
0.5
balance
MECHANICAL PROPERTIES:
Grade
Tensile Strength
ksi (min.)
Yield Strength 0.2%
Offset ksi (min.)
Elongation -
% in
50 mm (min.)
Hardness
(Brinell) MAX
Hardness
(Rockwell B) MAX
310/310S
75
30
40
217
95
PHYSICAL PROPERTIES:
Denstiy
lbm/in3
Coefficient of
Thermal Expansion (min/in)-°F
Electrical Resistivity mW-in
Thermal Conductivity BTU/hr-ft-°F
Specific Heat BTU/lbm -°F
Magnetic Permability (annealed)1
Modules of Elasticity (annealed)2-psi
at 68 °F
at 68 – 212°F
at 68 – 932°F
at 68 – 1832°F
at 68°F
at 1200°F
at 68 – 1832°F
at 68 – 932°F
at 32 – 212°F
at 200H
in tension (E)
in shear (G)
0.29
8.8
9.5
10.5
30.7
—
10.5
10.8
0.12
1.02
29 x 106
11.2 x 106
STAINLESS STEEL PLATES,GRADES WITH THICKNESS AND WIDTH
We export our STAINLESS STEEL 310 HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.