GENERAL PROPERTIES:-
317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes.
317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
APPLICATIONS:-
- Flue-gas desulfurization systems
- Chemical process vessels
- Petrochemical
- Pulp and Paper
- Condensers in power generation
CORROSION PROPERTIES:-
317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.
WELDING:-
317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.
CHARACTERISTICS:-
- Improved general and localized corrosion to 316L stainless
- Good formability
- Good weldability
CHEMICAL PROPERTIES:-
Ni |
Cr |
Mo | Mn | Si |
11.0 - 15.0 |
18.0 - 20.0 |
3.0 - 4.0 |
2.0 Max |
.75 Max |
C | N | S | P | Fe |
0.03 Max |
0.1 Max |
0.03 Max |
0.045 Max |
Balance |
MECHANICAL PROPERTIES:-
Ultimate Tensile Strength, ksi Minimum |
.2% Yield Strength, ksi Minimum |
Elongation Percent |
Hardness Max. |
75 |
30 |
35 |
217 Brinell |
HEX BARS PRODUCT OVERVEIW
Stainless Steel Hex Bar |
Thickness Range of Flat Bar |
3/16″ thru 3″ Larger sizes available upon request |
Grades |
202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:
Size in Inches |
Wt per Ft |
Wt per 12′ |
303 |
304/L |
316/L |
416 |
3/16″ |
0.104 |
1.248 |
X |
X |
X |
X |
1/4″ |
0.180 |
2.160 |
X |
X |
X |
X |
5/16″ |
0.290 |
3.480 |
X |
X |
X |
X |
3/8″ |
0.410 |
4.920 |
X |
X |
X |
X |
7/16″ |
0.560 |
6.72 |
X |
X |
X |
X |
1/2″ |
0.740 |
8.880 |
X |
X |
X |
X |
9/16″ |
0.930 |
11.16 |
X |
X |
X |
X |
5/8″ |
1.150 |
13.80 |
X |
X |
X |
X |
11/16″ |
1.390 |
16.68 |
X |
X |
X |
|
3/4″ |
1.660 |
19.92 |
X |
X |
X |
X |
13/16″ |
1.950 |
23.40 |
X |
X |
X |
|
7/8″ |
2.300 |
27.60 |
X |
X |
X |
X |
15/16″ |
2.600 |
31.20 |
X |
X |
X |
X |
1″ |
2.90 |
34.80 |
X |
X |
X |
X |
1-1/16″ |
3.30 |
39.60 |
X |
X |
X |
X |
1-1/8″ |
3.700 |
44.40 |
X |
X |
X |
X |
1-1/4″ |
4.600 |
55.20 |
X |
X |
X |
X |
1-5/16″ |
5.100 |
61.20 |
X |
X |
X |
|
1-3/8″ |
5.600 |
67.20 |
X |
X |
X |
X |
1-7/16″ |
6.100 |
73.20 |
X |
X |
X |
|
1-1/2″ |
6.600 |
79.20 |
X |
X |
X |
X |
1-5/8″ |
7.800 |
93.60 |
X |
X |
X |
|
1-3/4″ |
9.030 |
108.36 |
X |
X |
X |
X |
1-7/8″ |
10.400 |
124.80 |
X |
X |
X |
X |
2″ |
11.80 |
141.60 |
X |
X |
X |
X |
2-1/4″ |
14.920 |
179.04 |
X |
X |
X |
X |
2-3/8″ |
16.920 |
203.04 |
X |
X |
X |
|
2-1/2″ |
18.42 |
221.04 |
X |
X |
X |
X |
3″ |
26.53 |
318.36 |
X |
X |
X |
X |
STAINLESS STEEL BAR VALUE ADDED OPTIONS:
Stainless Steel Bar Value Added Options |
Stainless Steel Bar Polishing |
Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided. |
Heatreating & Annealing |
Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application |
Positive Material Identification (PMI) |
Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
UT Testing |
In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement. |
- Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
- Rapid cut of round bar 5/8″ thru 4″ dia
- Larger stainless bar cutting thru 26″ in diameter
- Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
- Grinding and polishing available upon request
- Special heat treat requirements can also be supplied. Ask for details.
- Stainless round bars can also be polished or center-less ground to exact tolerances.
We export our STAINLESS STEEL 317L HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.