AMS 5510 UNS S32100 Hex Bars, SS 321 Hexagon Bars, AISI SS 321 Stainless Steel 321 Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4541 SS 321 Hexagon Bars, SS UNS S32100 Round Bars, Stainless Steel 321 Threaded Rods, 321 Stainless Steel Cold Drawn Bars Suppliers in India.
GENERAL PROPERTIES:-
Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 – 1500°F (427 – 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.
Alloy 321H (UNS S 32109) is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.
Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.
APPLICATIONS:-
- Aerospace – piston engine manifolds
- Chemical Processing
- Expansion Joints
- Food Processing – equipment and storage
- Petroleum Refining – polythionic acid service
- Waste Treatment – thermal oxidizers
CORROSION RESISTANCE:-
- exhibits good general corrosion resistance that is comparable to 304.
- developed for use in the chromium carbide precipitation range of 1800 – 1500°F (427 – 816°C) .
- can be used in most diluted organic acids at moderate temperatures .
- can be used in pure phosphoric acid at lower temperatures.
- can be used in up to 10% diluted solutions at elevated temperatures.
- resists polythionic acid stress corrosion cracking in hydrocarbon service.
- utilized in chloride or fluoride free caustic solutions at moderate temperatures.
- does not perform well in chloride solutions, even in small concentrations, or in sulfuric acid service.
HOT FORMING:-
- Working temperatures of 2100 – 2300°F (1149 – 1260°C) are recommended for forging, upsetting and other hot working processes.
- Alloy not suitable for work at temperatures below 1700°F (927°C).
- Material must be water quenched or fully annealed after working to re-attain maximum corrosion resistance.
COLD FORMING:-
- Quite ductile and forms easily.
WELDING:-
- Readily welded by most standard processes.
- Post weld heat treatment is not necessary
MACHINING:-
- Hardening rate of 321 makes it less machinable than 410 stainless steel, but similar to 304
CHEMICAL PROPERTIES:-
% | Cr | Ni | C | Si | Mn | P | S | N | Ti | Fe |
---|---|---|---|---|---|---|---|---|---|---|
321 | min:17.0 max:19.0 |
min: 9.0 max:12.0 |
max:0.08 | max:0.75 | max:2.0 | max:0.045 | max:0.03 | max:0.10 | min:5*(C+N) max:0.70 |
Balance |
321H | min:17.0 max:19.0 |
min: 9.0 max:12.0 |
min:0.04 max:0.10 |
min:18.0 max:20.0 |
max:2.0 | max:0.045 | max:0.03 | max:0.10 | min:5*(C+N) max:0.70 |
Balance |
MECHANICAL PROPERTIES
Grade | Tensile Strength ksi (min.) |
Yield Strength 0.2% Offset ksi (min.) |
Elongation - % in 50 mm (min.) |
Hardness (Brinell) MAX |
---|---|---|---|---|
321 | 75 | 30 | 40 | 217 |
PHYSICAL PROPERTIES
Denstiy lbm/in3 |
Coefficient of Thermal Expansion (min/in)-°F |
Thermal Conductivity BTU/hr-ft-°F | Specific Heat BTU/lbm -°F | Modules of Elasticity (annealed)2-psi | |
---|---|---|---|---|---|
at 68 °F | at 68 – 212°F | at 68 – 1832°F | at 200°F | at 32 – 212°F | in tension (E) |
0.286 | 9.2 | 20.5 | 9.3 | 0.12 | 28 x 106 |
HEX BARS PRODUCT OVERVEIW
Stainless Steel Hex Bar | |
---|---|
Thickness Range of Flat Bar | 3/16″ thru 3″ Larger sizes available upon request |
Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:
Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
---|---|---|---|---|---|---|
3/16″ | 0.104 | 1.248 | X | X | X | X |
1/4″ | 0.180 | 2.160 | X | X | X | X |
5/16″ | 0.290 | 3.480 | X | X | X | X |
3/8″ | 0.410 | 4.920 | X | X | X | X |
7/16″ | 0.560 | 6.72 | X | X | X | X |
1/2″ | 0.740 | 8.880 | X | X | X | X |
9/16″ | 0.930 | 11.16 | X | X | X | X |
5/8″ | 1.150 | 13.80 | X | X | X | X |
11/16″ | 1.390 | 16.68 | X | X | X | |
3/4″ | 1.660 | 19.92 | X | X | X | X |
13/16″ | 1.950 | 23.40 | X | X | X | |
7/8″ | 2.300 | 27.60 | X | X | X | X |
15/16″ | 2.600 | 31.20 | X | X | X | X |
1″ | 2.90 | 34.80 | X | X | X | X |
1-1/16″ | 3.30 | 39.60 | X | X | X | X |
1-1/8″ | 3.700 | 44.40 | X | X | X | X |
1-1/4″ | 4.600 | 55.20 | X | X | X | X |
1-5/16″ | 5.100 | 61.20 | X | X | X | |
1-3/8″ | 5.600 | 67.20 | X | X | X | X |
1-7/16″ | 6.100 | 73.20 | X | X | X | |
1-1/2″ | 6.600 | 79.20 | X | X | X | X |
1-5/8″ | 7.800 | 93.60 | X | X | X | |
1-3/4″ | 9.030 | 108.36 | X | X | X | X |
1-7/8″ | 10.400 | 124.80 | X | X | X | X |
2″ | 11.80 | 141.60 | X | X | X | X |
2-1/4″ | 14.920 | 179.04 | X | X | X | X |
2-3/8″ | 16.920 | 203.04 | X | X | X | |
2-1/2″ | 18.42 | 221.04 | X | X | X | X |
3″ | 26.53 | 318.36 | X | X | X | X |
STAINLESS STEEL BAR VALUE ADDED OPTIONS:
Stainless Steel Bar Value Added Options | |
---|---|
Stainless Steel Bar Polishing | Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided. |
Heatreating & Annealing | Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application |
Positive Material Identification (PMI) | Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
UT Testing | In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement. |
- Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
- Rapid cut of round bar 5/8″ thru 4″ dia
- Larger stainless bar cutting thru 26″ in diameter
- Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
- Grinding and polishing available upon request
- Special heat treat requirements can also be supplied. Ask for details.
- Stainless round bars can also be polished or center-less ground to exact tolerances.
We export our STAINLESS STEEL 321 HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.