Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S17700 Hex Bars, SS 17-7PH Hexagon Bars, AISI SS 17-7PH Stainless Steel 17-7PH Round Bars Supplier, Manufacturer and Exporter in India


Din 1.4568 SS 17-7PH Hexagon Bars, SS UNS S17700 Round Bars, Stainless Steel 17-7PH Threaded Rods, 17-7PH Stainless Steel 17-7PH Cold Drawn Bars Suppliers in India.

GENERAL PROPERTIES

Stainless Grade 17-7 PH is a precipitation hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. The alloy provides valuable property combinations particularly well suited for aerospace applications. This special alloy also provides benefits for other applications requiring high strength and good corrosion resistance, as well as excellent properties for flat springs at temperatures up to 600°F (316°C).


APPLICATIONS

  • applications requiring good strength, corrosion resistance and mechanical properties up to 800 F in service.
  • used for very detailed, intricate parts due to its low distortion in heat treatment.
  • commonly found in a variety of springs and washers.

CORROSION RESISTANCE

Corrosion resistance of Type 17-7PH stainless steel in all heat treated conditions, like other types of stainless steels – will develop superficial rust in some environments. For example, in a marine atmosphere, stainless steels show evidence of rusting after relatively short exposure periods. However, after exposure of one or two years, the amount of rust present is little more than that present at six months. As with all martensitic steels, 17-7PH stainless steel may be subject to cracking when exposed under stress in environments containing hydrogen sulfide. Such applications are not recommended.


FORMABILITY

In Condition A, the alloy can be formed comparably to Type 301. It work hardens rapidly and may require intermediate annealing in deep drawing or in forming intricate parts. Springback is similar to that of Type 301. This alloy is extremely hard and strong in Condition C. Therefore, fabrication techniques for such material must be used.


WELDABILITY

The precipitation hardening class of stainless steel is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to achieve optimum mechanical properties by considering the best heat-treated conditions in which to weld and which heat treatments should follow welding. This particular alloy is generally considered to have poorer weldability compared to the most common alloy of this stainless class, 17-4 PH stainless steel. A major difference is the high Al content of this alloy, which degrades penetration and enhances weld slag formation during arc welding. Also, the austenite conditioning and precipitation hardening heat treatments are both required after welding to achieve high strength levels. When a weld filler is needed, 17-7 PH is most often specified.


CHEMICAL PROPERTIES:

TYPE Cr Ni Al C Mn P S Si
17-7 min: 16.0
max: 18.0
min: 6.75
max: 7.75
min: 0.75
max: 1.50
0.09
max
1.00
max
0.05
max
0.03
max
1.00
max

MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) Yield Strength 0.2% ksi (min) Elongation % Hardness (Rockwell) MAX
17-7 130 40 35 B85

PHYSICAL PROPERTIES:

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.2820 117 —- 30.7 at 68°F 28.5 8.5 at 32 – 212°F 0.1200 at 68°F to 212°F 2560-2625°F

Fittings and Flanges for Stainless Steel Pipe
Stainless steel piping systems can be joined by butt welding and, in the heavier 40S and 80S schedules, with threaded connections.

BUTT WELDING STAINLESS STEEL PIPE FITTINGS

Harsh steel stocks butt welding fittings in the following configuration.

  • Elbows 45 degree and 90 degree - long radius and short radius.
  • Return bends 180 - long radius and short radius.
  • educers - concentric and eccentric.
  • Tees - equal and reducing.
  • Caps.
  • Stub ends - Type B.

Advantages of stainless steel butt Weld fitting to the pipe are to keep pipes permanently leak proof. The continuous structure helps strength between pipes and fittings. It reduces pressure and also minimises the action of corrosion and erosion. Butt welding fittings can be supplied in either seamless or welded construction and are covered by specifications ASTM A403M and ASTM A815M for Duplex grades.

STAINLESS STEEL SCREWED AND SOCKET WELD FITTINGs

Stainless steel piping systems can be connected using stainless steel screwed fittings - BSP threaded ("150lb") low pressure stainless steel fittings and NPT class 3000 high pressure stainless fittings in Grade 316. Socket weld fittings are used in high pressure piping systems and available in grade 316L to suit schedule 80S wall thickness piping.


MANUFACTURING SPECIFICATIONS:

  • ASTM A182M (3000lb NPT and socket weld).
  • ANSI B16.3 (BSP dimensions)
  • ISO 4144 (BSP dimensions)

STAINLESS STEELS FITTINGS AND FLANGES:

HEX BARS PRODUCT OVERVEIW

Stainless Steel Hex Bar
Thickness Range of Flat Bar 3/16″ thru 3″ Larger sizes available upon request
Grades 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available

INVENTORY:

Size in Inches Wt per Ft Wt per 12′ 303 304/L 316/L 416
3/16″ 0.104 1.248 X X X X
1/4″ 0.180 2.160 X X X X
5/16″ 0.290 3.480 X X X X
3/8″ 0.410 4.920 X X X X
7/16″ 0.560 6.72 X X X X
1/2″ 0.740 8.880 X X X X
9/16″ 0.930 11.16 X X X X
5/8″ 1.150 13.80 X X X X
11/16″ 1.390 16.68 X X X
3/4″ 1.660 19.92 X X X X
13/16″ 1.950 23.40 X X X
7/8″ 2.300 27.60 X X X X
15/16″ 2.600 31.20 X X X X
1″ 2.90 34.80 X X X X
1-1/16″ 3.30 39.60 X X X X
1-1/8″ 3.700 44.40 X X X X
1-1/4″ 4.600 55.20 X X X X
1-5/16″ 5.100 61.20 X X X
1-3/8″ 5.600 67.20 X X X X
1-7/16″ 6.100 73.20 X X X
1-1/2″ 6.600 79.20 X X X X
1-5/8″ 7.800 93.60 X X X
1-3/4″ 9.030 108.36 X X X X
1-7/8″ 10.400 124.80 X X X X
2″ 11.80 141.60 X X X X
2-1/4″ 14.920 179.04 X X X X
2-3/8″ 16.920 203.04 X X X
2-1/2″ 18.42 221.04 X X X X
3″ 26.53 318.36 X X X X

STAINLESS STEEL BAR VALUE ADDED OPTIONS:

Stainless Steel Bar Value Added Options
Stainless Steel Bar Polishing Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish.  Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided.
Heatreating & Annealing Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated.  In some cases, secondary annealing 300 series stainless steel may be required depending on the application
Positive Material Identification (PMI) Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.
UT Testing In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement.
  • Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
  • Rapid cut of round bar 5/8″ thru 4″ dia
  • Larger stainless bar cutting thru 26″ in diameter
  • Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
  • Grinding and polishing available upon request
  • Special heat treat requirements can also be supplied. Ask for details.
  • Stainless round bars can also be polished or center-less ground to exact tolerances.

We export our PRECIPITATION HARDENING STAINLESS STEEL 17-7PH HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
PRECIPITATION HARDENING STAINLESS STEEL 17-7PH HEX BARS
Author Rating
5starstarstarstarstar