UNS S31653 Hex Bars, SS 316LN Hexagon Bars, AISI SS 316LN Stainless Steel 316LN Round Bars Supplier, Manufacturer and Exporter in India
Din 1.4429 SS 316LN Hexagon Bars, SS UNS S31653 Round Bars, Stainless Steel 316LN Threaded Rods, 316LN Stainless Steel 316LN Cold Drawn Bars Suppliers in India.
INTRODUCTION:-
Stainless steel grade 316LN is an austenitic type of steel that is a low carbon, nitrogen-enhanced version of grade 316 steel. The nitrogen content in this steel provides solid solution hardening, and raises its minimum specified yield strength. It also possesses good resistance to general corrosion and pitting/crevice corrosion.
The following datasheet provides an overview of stainless steel grade 316LN.
CHEMICAL COMPOSITION:-
The chemical composition of grade 316LN stainless steel is outlined in the following table.
| Element | Content (%) |
|---|---|
| Iron, Fe | Balance |
| Chromium, Cr | 16.0-18.0 |
| Nickel, Ni | 10.0-14.0 |
| Molybdenum, Mo | 2.0-3.0 |
| Manganese, Mn | 2.00 |
| Silicon, Si | 1.00 |
| Nitrogen, N | 0.10-0.30 |
| Phosphorous, P | 0.045 |
| Carbon, C | 0.03 |
| Sulphur, S | 0.03 |
MECHANICAL PROPERTIES:-
The mechanical properties of grade 316LN stainless steel are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 515 MPa | 74694 psi |
| Yield strength | 205 MPa | 29732 psi |
| Modulus of elasticity | 190-210 GPa | 27557-30457 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 60% | 60% |
OTHER DESIGNATION:-
Equivalent materials to grade 316LN stainless steel are given below.
| ASTM A182 | ASTM A213 | ASTM A240 | ASTM A240 | ASTM A276 |
| ASTM A193 (B8MN, B8MNA) | ASTM A312 | ASTM A336 | ASTM A358 | ASTM A376 |
| ASTM A194 (B8MN, B8MNA) | ASTM A403 | ASTM A430 | ASTM A479 | ASTM A666 |
|
ASTM A688 |
ASTM A813 |
ASTM A814 |
DIN 1.4406 |
DIN 1.4429 |
APPLICATION:-
Grade 316LN stainless steel is widely used in the following applications:
- Trauma nails
- Orthopedic implants
- Neurological applications
- Surgical instruments
HEX BARS PRODUCT OVERVEIW
| Stainless Steel Hex Bar | |
|---|---|
| Thickness Range of Flat Bar | 3/16″ thru 3″ Larger sizes available upon request |
| Grades | 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available |
INVENTORY:
| Size in Inches | Wt per Ft | Wt per 12′ | 303 | 304/L | 316/L | 416 |
|---|---|---|---|---|---|---|
| 3/16″ | 0.104 | 1.248 | X | X | X | X |
| 1/4″ | 0.180 | 2.160 | X | X | X | X |
| 5/16″ | 0.290 | 3.480 | X | X | X | X |
| 3/8″ | 0.410 | 4.920 | X | X | X | X |
| 7/16″ | 0.560 | 6.72 | X | X | X | X |
| 1/2″ | 0.740 | 8.880 | X | X | X | X |
| 9/16″ | 0.930 | 11.16 | X | X | X | X |
| 5/8″ | 1.150 | 13.80 | X | X | X | X |
| 11/16″ | 1.390 | 16.68 | X | X | X | |
| 3/4″ | 1.660 | 19.92 | X | X | X | X |
| 13/16″ | 1.950 | 23.40 | X | X | X | |
| 7/8″ | 2.300 | 27.60 | X | X | X | X |
| 15/16″ | 2.600 | 31.20 | X | X | X | X |
| 1″ | 2.90 | 34.80 | X | X | X | X |
| 1-1/16″ | 3.30 | 39.60 | X | X | X | X |
| 1-1/8″ | 3.700 | 44.40 | X | X | X | X |
| 1-1/4″ | 4.600 | 55.20 | X | X | X | X |
| 1-5/16″ | 5.100 | 61.20 | X | X | X | |
| 1-3/8″ | 5.600 | 67.20 | X | X | X | X |
| 1-7/16″ | 6.100 | 73.20 | X | X | X | |
| 1-1/2″ | 6.600 | 79.20 | X | X | X | X |
| 1-5/8″ | 7.800 | 93.60 | X | X | X | |
| 1-3/4″ | 9.030 | 108.36 | X | X | X | X |
| 1-7/8″ | 10.400 | 124.80 | X | X | X | X |
| 2″ | 11.80 | 141.60 | X | X | X | X |
| 2-1/4″ | 14.920 | 179.04 | X | X | X | X |
| 2-3/8″ | 16.920 | 203.04 | X | X | X | |
| 2-1/2″ | 18.42 | 221.04 | X | X | X | X |
| 3″ | 26.53 | 318.36 | X | X | X | X |
STAINLESS STEEL BAR VALUE ADDED OPTIONS:
| Stainless Steel Bar Value Added Options | |
|---|---|
| Stainless Steel Bar Polishing | Harsh Steel can polish nearly any stainless steel bar item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless steel polished bar can also be cut to size. Pitt free surfaces can also be provided. |
| Heatreating & Annealing | Some grades of stainless steel bars can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel bar can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application |
| Positive Material Identification (PMI) | Harsh Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| UT Testing | In some cases, UT testing of the stainless steel bar may be required. We can assist you with this requirement. |
- Need 1,100 pieces of 7/8″ 303 round bar cut to 2-1/8″ long? We can process this job in a few days with our Amada CM100CNC with precise part tolerances
- Rapid cut of round bar 5/8″ thru 4″ dia
- Larger stainless bar cutting thru 26″ in diameter
- Multiple cutting stations allow us to ship cut stainless bar to size when you need it.
- Grinding and polishing available upon request
- Special heat treat requirements can also be supplied. Ask for details.
- Stainless round bars can also be polished or center-less ground to exact tolerances.
We export our STAINLESS STEEL 316LN HEX BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
