UNS S15500 Strips, Precipitation Hardening SS 15-5PH Strips, AISI SS 15-5PH Stainless Steel 17-7PH Strips Supplier, Manufacturer and Exporter in India
Din 1.4545 SS 15-5PH Strips, SS UNS S15500 Strips, Precipitation Hardening Stainless Steel 17-7PH Strips, Precipitation Hardening Stainless Steel 15-5PH Strips Suppliers in India.
Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.
The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.
UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
PRECIPITATION HARDENING STAINLESS STEEL 15-5PH STRIP HEAT TREATED:
Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following Precipitation hardening stainless steel 15-5PH products as below:
- Sheet and Plate
- AMS 5862
- BMS 7-240
- Bar/Forging
- AMS 5659
- ASTM-A-484
- ASTM-A-564
15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.
Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.
PRECIPITATION HARDENING STAINLESS STEEL 15-5PH STRIP INDUSTRIES THTA USE3 15500 INCLUDE :
- Aerospace
- Chemical
- Food processing
- General metal working
- Paper industries
- Petrochemical
PRECIPITATION HARDENING STAINLESS STEEL 15-5PH PRODUCTS PARTIALLY OR COMPLETELY CONSTRUCTED OF 15500 INCLUDE:
- Aircraft components
- Cylinders
- Engine parts
- Fittings
- Gears
- Hallow shafts
- Marine gas turbine compressor sections
- Paper mill equipment
- Shafts
- Valves
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
|---|---|---|---|---|---|---|---|
| 15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
Harsh steel Supplies and Exports Precipitation hardening stainless steel 15-5PH strip from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
Harsh steel provided the Specification of Precipitation hardening stainless steel 15-5PH Strip as below:-
- Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
- Material can be supplied in coil or length form
- Hardness of material to customer's specific requirements.
Harsh steel Export and Supply Precipitation hardening stainless steel 15-5PH Strip capabilities include:
- Annealed & Precision
- thickness 0.1mm to 6.00mm
- width 2.5mm to 1320mm (slit to close tolerances)
Harsh steel provides Precipitation hardening stainless steel 15-5PH Cold rolled mill finish strip such as:
- 2D - cold rolled, heat treated, pickled.
- 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
- 2R(BA) - cold rolled, bright annealed
- HR - hot rolled, annealed
We export our PRECIPITATION HARDENING STAINLESS STEEL 15-5PH STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
