Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S20200 Strips, SS 202 Strips, AISI SS 202 Stainless Steel 202 Strips Supplier, Manufacturer and Exporter in India


Din 1.4373 SS 202 Strips, SS UNS S20200 Strips, Stainless Steel 202 Strips, 202 Stainless Steel 202 Strips Suppliers in India.

Type 201 Stainless Steel Strip is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type SS 201 Strip is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. SS 201 Strip is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Stainless Steel 201 Strip can be substituted for Type 301 in many applications



Harsh steel Export and Supply Stainless steel 201 strips capabilities include:

  • Stainless Steel 201 Strip Annealed & Precision
  • Stainless Steel 201 Strip thickness 0.1mm to 6.00mm
  • Stainless Steel 201 Strip width 2.5mm to 1320mm (slit to close tolerances)


Harsh steel provides Stainless steel 201 Cold rolled mill finish strips such as:

  • Stainless Steel 201 Strip 2D - cold rolled, heat treated, pickled.
  • Stainless Steel 201 Strip 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
  • Stainless Steel 201 Strip 2R(BA) - cold rolled, bright annealed
  • Stainless Steel 201 Strip HR - hot rolled, annealed

STAINLESS STEEL 201 STRIP PRODUCT FORMS:

Sheet, Strip


STAINLESS STEEL 201 STRIP TYPICAL APPLICATIONS:

Typical applications for Types 201 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.


STAINLESS STEEL 201 STRIP PROCESSING:

The annealing temperature for Type 201 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.


STAINLESS STEEL 201 STRIP FORMING:

Stainless Steel 201 Strip has similar bending, forming and drawing characteristics to Type 301 stainless steel


STAINLESS STEEL 201 STRIP WELDING:

Stainless Steel 201 Strip can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 201 is susceptible to intergranular corrosion in the weld heat affected zone.


STAINLESS STEEL 201 STRIP CORROSION:

Stainless Steel 201 Strip is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.


STAINLESS STEEL 201 STRIP CHEMICAL PROPERTIES:
Element Type 201
Carbon 0.15x
Manganese 5.5 - 7.5
Sulfur 0.03X
Phosphorus 0.060x
Silicon 1.0 x
Chromium 16 - 18
Nickel 3.5 -5.5
Nitrogen 0.25x

STAINLESS STEEL 201 STRIP PHYSICAL PROPERTIES:
Density (lb./ in^2) @ RT   0.283
Modulus of Elasticity in Tension (psi x 10^6)   28.6
Specific Heat (BTU/o F/lb.) 32 to 212 oF 0.12
Thermal Conductivity (BTU/hr/ft^2/ft) 212oF 9.4
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) 32 to 212oF 8.7
  32 to 600oF 9.7
  32 to 1,000oF 10.2
Electrical Resistivity (micro ohms - cm) at 70oF 69
Melting Point Range (oF)   2550/2650
Oxidation Resistance - Continuous Service(oF)   1550
Oxidation Resistance - Intermittent Service(oF)   1500

Harsh steel Supplies and Exports Stainless steel 201 strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -


Harsh steel provided the Specification of Stainless steel 201 strips as below: -
  • Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
  • Material can be supplied in coil or length form
  • Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 201 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 201 STRIPS EXPORTER
Author Rating
5starstarstarstarstar