Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S41000 Strips, SS 410 Strips, AISI SS 410 Stainless Steel 410 Strips Supplier, Manufacturer and Exporter in India


Din 1.4006 SS 410 Strips, SS UNS S41000 Strips, Stainless Steel 410 Strips, 410 Stainless Steel Strips Suppliers in India.

Stainless Steel 410 Strip is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Stainless Steel 410 Strip contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Stainless Steel 410 Strip displays maximum corrosion resistance when it's been hardened, tempered, and then polished.



Harsh steel Export and Supply Stainless steel 410 strips capabilities include:

  • Stainless steel 410 strips Annealed & Precision
  • Stainless steel 410 strips thickness-0.1mm to 6.00mm
  • Stainless steel 410 strips width-2.5mm to 1320mm (slit to close tolerances)


Harsh steel provides Stainless steel 410 Cold rolled mill finish strips such as:

  • Stainless steel 410 strips 2D - cold rolled, heat treated, pickled.
  • Stainless steel 410 strips 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
  • Stainless steel 410 strips 2R(BA) - cold rolled, bright annealed
  • Stainless steel 410 strips HR - hot rolled, annealed

STAINLESS STEEL 410 STRIP APPLICATIONS:

Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Stainless Steel 410 Strip. Examples of applications that frequently used Stainless Steel 410 Strip include:


  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps

STAINLESS STEEL 410 STRIP CORROSION RESISTANCE:

  • Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
  • Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
  • Good corrosion resistance to low concentrations of mild organic and mineral acids

STAINLESS STEEL 410 STRIP WELDING CHARACTERISTICS:

  • Readily welded by all standard methods
  • To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400°F (177 to 204°C)
  • Post weld annealing is recommended to retain maximum ductility

STAINLESS STEEL STRIP 410 HEAT TREATMENT:
  • The proper hot work range is 2000 to 2200°F (1093 to 1204°C)
  • Do not work this material below 1650oF (899°C)

STAINLESS STEEL 410 STRIP CHEMICAL PROPERTIES: -
C Mn Si P S Cr Ni
410 0.15 max 1.00 max 1.00 max 0.04 max 0.03 max min: 11.5
max: 13.5
0.50 max
STAINLESS STEEL 410 STRIP MECHANICAL PROPERTIES:
Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410 65 (450) 30 (205) 20 217 96
STAINLESS STEEL 410 STRIP MECHANICAL PROPERTIES OF HEAT TREATED 410:
Heat Treatment T410 (0.14%C) Hardened 1800°F (982°C)
Rockwell Hardness 0.2% YS, Ksi (MPa) UTS, Ksi (MPa)
Annealed* 81 HRB 45.4 (313) 80.4 (554)
Hardened & Tempered 400°F (204°C) 43 HRC 156.1 (1076) 202.9 (1399)
Hardened & Tempered 550°F (288°C) 40 HRC 148.3 (1022) 187.0 (1289)
Hardened & Tempered 600°F (316°C) 40 HRC 148.8 (1026) 186.1 (1283)
Hardened & Tempered 800°F (427°C) 41 HRC 132.9 (916) 188.5 (1300)
Hardened & Tempered 900°F (482°C) 41 HRC 122.6 (845) 154.3 (1063)
Hardened & Tempered 1000°F (538°C) 35 HRC 127.9 (882) 154.3 (1063)
Hardened & Tempered 1200°F (649°C) 98 HRB 85.5 (589) 111.2 (767)
STAINLESS STEEL 410 STRIP PHYSICAL PROPERTIES:
Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.276 14.4 at 212°F 56 at 68°F 29 5.90 at 68 – 392°F 0.11 at 68°F to 212°F 2700 to 2790
6.5 at 68 – 1112°F

Harsh steel Supplies and Exports Stainless steel 410 Strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -


Harsh steel provided the Specification of Stainless steel 410 strips as below: -
  • Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
  • Material can be supplied in coil or length form
  • Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 410 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 410 STRIPS EXPORTER
Author Rating
5starstarstarstarstar