Stainless Steel 304 Strips, UNS S30400 Strips Supplier & Exporter

STAINLESS STEEL 304 STRIP GENERAL PROPERTIES:

Stainless Steel 304 Strip is a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 has a maximum carbon of 0.07% . It is the standard "18/8 stainless" that is commonly found in pans and cooking tools. Stainless Steel 304 Strip is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercial applications, Stainless Steel 304 Strip exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes.

Harsh steel Export and Supply Stainless steel 304 strips capabilities include:

• Stainless Steel 304 Strip Annealed & Precision
• Stainless Steel 304 Strip thickness-0.1mm to 6.00mm
• Stainless Steel 304 Strip width-2.5mm to 1320mm (slit to close tolerances)

Harsh steel provides Stainless steel 304 Cold rolled mill finish strips such as:

• Stainless Steel 304 Strip 2D - cold rolled, heat treated, pickled.
• Stainless Steel 304 Strip 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
• Stainless Steel 304 Strip 2R(BA) - cold rolled, bright annealed
• Stainless Steel 304 Strip HR - hot rolled, annealed

STAINLESS STEEL 304 STRIP APPLICATIONS:

Stainless Steel 304 Strip is used in a wide variety of home and commercial applications, including:

• Kitchen benches, sinks, troughs, equipment, and appliances
• Chemical containers, including for transport
• Food processing equipment, particularly in beer brewing, milk processing, and wine making
• Heat exchangers
• Architectural trim and molding
• Woven or welded screens for mining, quarrying & water filtration
• Automotive and aerospace structural use
• Nuts, bolts, screws, and other fasteners in the marine environment
• Construction material in large buildings
• Dyeing industry

STAINLESS STEEL 304 STRIP CORROSION RESISTANCE:

• Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.
• Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.
• The 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.

STAINLESS STEEL 304 STRIP HEAT RESISTANCE:

• Good oxidation resistance at temperatures up to 1700°F (927 °C)
• Continuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.
• Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.

STAINLESS STEEL 304 STRIP PROPERTIES OF 304 ALLOY:

STAINLESS STEEL 304 STRIP WELDING CHARACTERISTICS:

Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:

• avoidance of cracking
• preservation of corrosion resistance

STAINLESS STEEL 304 STRIP PROCESSING - HOT FORMING:

• To forge, heat uniformity to 2100 / 2300 °F
• Do not forge below 1700 °F
• Forging can be air cooled without danger of cracking

STAINLESS STEEL 304 STRIP PROCESSING - COLD FORMING:

• Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.
• These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.

STAINLESS STEEL 304 STRIP MACHINABILITY:

• The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.

Harsh steel Supplies and Exports Stainless steel 304 strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -

Harsh steel provided the Specification of Stainless steel 304 strips as below: -

• Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
• Material can be supplied in coil or length form
• Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 304 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry