Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S30403 Strips, SS 304L Strips, AISI SS 304L Stainless Steel 304L Strips Supplier, Manufacturer and Exporter in India


Din 1.4307 SS 304L Strips, SS UNS S30403 Strips, Stainless Steel 304L Strips, 304L Stainless Steel 304L Strips Suppliers in India.

STAINLESS STEEL 304L STRIP GENERAL PROPERTIES:

Stainless Steel 304L Strip a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type Stainless Steel 304L Strip has a carbon maximum is 0.030. It is the standard "18/8 stainless" that is commonly found in pans and cooking tools. Stainless Steel 304L Strip is the most versatile and widely used alloy in the stainless steel family. Ideal for a wide variety of home and commercial applications, Stainless Steel 304L Strip exhibits excellent corrosion resistance and has a high ease of fabrication, outstanding formability. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes.



Harsh steel Export and Supply Stainless steel 304L strips capabilities include:

  • Stainless Steel 304L Strip Annealed & Precision
  • Stainless Steel 304L Strip thickness-0.1mm to 6.00mm
  • Stainless Steel 304L Strip width-2.5mm to 1320mm (slit to close tolerances)


Harsh steel provides Stainless steel 304L Cold rolled mill finish strips such as:

  • Stainless Steel 304L Strip 2D - cold rolled, heat treated, pickled.
  • Stainless Steel 304L Strip 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
  • Stainless Steel 304L Strip 2R(BA) - cold rolled, bright annealed
  • Stainless Steel 304L Strip HR - hot rolled, annealed

STAINLESS STEEL 304L STRIP APPLICATIONS:

Stainless Steel 304L Strip is used in a wide variety of home and commercial applications, including:


  • Food processing equipment, particularly in beer brewing, milk processing, and wine making
  • Kitchen benches, sinks, troughs, equipment, and appliances
  • Architectural trim and molding
  • Automotive and aerospace structural use
  • Construction material in large buildings
  • Chemical containers, including for transport
  • Heat exchangers
  • Nuts, bolts, screws, and other fasteners in the marine environment
  • Dyeing industry
  • Woven or welded screens for mining, quarrying & water filtration

STAINLESS STEEL 304L STRIP CORROSION RESISTANCE:
  • Resistance to corrosion in oxidizing environments is a result of the 18 to 19% chromium that the 304 alloys contain.
  • Resistance to moderately aggressive organic acids is a result of the 9 to 11% nickel that the 304 alloys contain.
  • At times, alloy 304L may show a lower corrosion rate than the higher carbon Alloy 304; otherwise, the 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments.
  • Alloy 304L is preferred for use in environments sufficiently corrosive to cause intergranular corrosion of welds and heat-affected zones on susceptible alloys.

STAINLESS STEEL 304L STRIP HEAT RESISTANCE:
  • Good oxidation resistance in intermittent service to 1600°F and in continuous service to 1690°F.
  • CContinuous use of 304 in the 800-1580°F range is not recommended if subsequent aqueous corrosion resistance is important.
  • Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.

STAINLESS STEEL 304L STRIP WELDING CHARACTERISTICS:

Excellent welding properties; post-weld annealing is not required when welding thin sections. Two important considerations in producing weld joints in the austenitic stainless steels are:


  • preservation of corrosion resistance
  • avoidance of cracking

STAINLESS STEEL 304L STRIP PROCESSING - HOT FORMING:
  • To forge, heat uniformity to 2100 / 2300 °F
  • Do not forge below 1700 °F
  • Forging can be air cooled without danger of cracking

STAINLESS STEEL 304L STRIP PROCESSING - COLD FORMING:
  • Its austenitic structure allows it to be deep-drawn without intermediate annealing, Making this the stainless steel grade of choice in the manufacturing of sinks, hollow-ware and saucepans.
  • These grades work harden rapidly. To relieve stresses produced in severe forming or spinning, parts should be full annealed or stress relief annealed as soon as possible after forming.

STAINLESS STEEL 304L STRIP MACHINABILITY:
  • The use of chip breakers is advised since the chips can be stringy. Stainless steel work harden rapidly, heavy positive feeds, sharp tooling, and a rigid set-up should be used.of cut below the work-hardened layer resulting from the previous passes.

STAINLESS STEEL 304L STRIP CHEMICAL PROPERTIES:
C Mn Si P S Cr Ni N
304L 0.03max 2.0max 0.75max 0.45max 0.03max min: 18.0 max: 20.0 min: 8.0 max: 12.0 0.10 max
STAINLESS STEEL 304L STRIP MECHANICAL PROPERTIES:
Grade Tensile Strength ksi (min) Yield Strength 0.2% ksi (min) Elongation % Hardness (Brinell) MAX Hardness (Rockwell B) MAX
304L 70 25 40 201 92
STAINLESS STEEL 304L STRIP PHYSICAL PROPERTIES:
Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.285 9.4 at 212°F 28.3 at 68°F 28 9.4 at 32 – 212°F 0.1200 at 68°F to 212°F 2500 to 2590
12.4 at 932 °F 39.4 at 752°F 10.2 at 32 – 1000°F
49.6 at 1652 °F 10.4 at 32 – 1500°F

Harsh steel Supplies and Exports Stainless steel 304L strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -


Harsh steel provided the Specification of Stainless steel 304L strips as below: -
  • Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
  • Material can be supplied in coil or length form
  • Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 304L STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 304L STRIPS EXPORTER
Author Rating
5starstarstarstarstar