Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S30409 Strips, SS 304H Strips, AISI SS 304H Stainless Steel 304H Strips Supplier, Manufacturer and Exporter in India


Din 1.4301 SS 304H Strips, SS UNS S30409 Strips, Stainless Steel 304H Strips, 304H Stainless Steel 304H Strips Suppliers in India.

STAINLESS STEEL 304H STRIP GENERAL PROPERTIES:

Stainless Steel 304H Strip is a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel with a maximum of 0.08% carbon. It is the standard "18/8 stainless" that is commonly found in pans and cooking tools. Stainless Steel 304H Strip is the most versatile and widely used alloy in the stainless steel family. It may be used for a wide variety of home and commercial applications and exhibits excellent corrosion resistance, has a high ease of fabrication, outstanding formability, and tremendous strength. The austenitic stainless steels are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes. Due to its controlled carbon content of 0.04 to 0.10, Alloy 304H provides improved high temperature strength when exposed to temperatures above 800oF. Stainless Steel 304H Strip also has greater short term and long term creep strength than Alloy 304L at temperatures above 500oC and is more resistant to sensitization than Alloy 304L.



Harsh steel Export and Supply Stainless steel 304H strips capabilities include:

  • Stainless Steel 304H Strip Annealed & Precision
  • Stainless Steel 304H Strip thickness-0.1mm to 6.00mm
  • Stainless Steel 304H Strip width-2.5mm to 1320mm (slit to close tolerances)


Harsh steel provides Stainless steel 304H Cold rolled mill finish strips such as:

  • Stainless Steel 304H Strip 2D - cold rolled, heat treated, pickled.
  • Stainless Steel 304H Strip 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
  • Stainless Steel 304H Strip 2R(BA) - cold rolled, bright annealed
  • Stainless Steel 304H Strip HR - hot rolled, annealed

STAINLESS STEEL 304H STRIP APPLICATIONS:

Stainless Steel 304H Strip is often used as a material of construction up to about 1500oF. Some examples of applications that Alloy 304H is commonly used for includes:


  • Most commonly used in petroleum refineries
  • Boilers
  • Heat exchangers
  • Condensers
  • Pipelines
  • Cooling towers
  • Steam exhausts
  • Electric generation plants
  • On occasion will be found in fertilizer and chemical plants

STAINLESS STEEL 304H STRIP HEAT RESISTANCE:
  • Good oxidation resistance in intermittent service to 870O C and in continuous service to 920O C
  • Continuous use of Alloy 304 in the 425-860°C range is not recommended if subsequent aqueous corrosion resistance is important
  • Alloy 304H has higher strength at elevated temperatures so is often used for structural and pressure-containing applications at temperatures above about 500°C and up to about 800°C
  • Alloy 304H will become sensitized in the temperature range of 425-860°C; this is not a problem for high temperature applications, but will result in reduced aqueous corrosion resistance.

STAINLESS STEEL 304H STRIP CORROSION RESISTANCE:
  • Resistance to corrosion in oxidizing environments is a result from the 18 to 19% chromium that the 304 alloys contain
  • Resistance to moderately aggressive organic acids is a result from the 9 to 11% nickel that the 304 alloys contain
  • At times, Alloy 304L may show a lower corrosion rate than the higher carbon Alloy 304; otherwise, the 304, 304L, and 304H alloys may be considered to perform uniformly in most corrosive environments.

STAINLESS STEEL 304H STRIP WELDING CHARACTERISTICS:
  • Readily welded by most standard processes.
  • May be necessary to anneal the plate after welding
  • Annealing helps restore corrosion resistance lost by the sensitization.

STAINLESS STEEL 304H STRIP PROCESSING - HOT FORMING:
  • Working tempertarues of 1652-2102 degrees F are recommended
  • Material should be annealed at 1900 degrees F
  • Material should be water quenched or or rapidly cooled

STAINLESS STEEL 304H STRIP PROCESSING - COLD FORMING:
  • Alloy is quite ductile and forms easily
  • Helps increase strength and hardness of alloy
  • May leave alloy slightly magnetic

STAINLESS STEEL 304H STRIP MACHINABILITY:
  • Subject to work hardening during deformation
  • Subject to chip breaking
  • Best results achieved through slower speed, heavier feeds, good lubrication, and sharp tooling

STAINLESS STEEL 304H STRIP CHEMICAL PROPERTIES:
% Cr Ni C Si Mn P S N
304H min: 18.0
max:20.0
min: 8.0
max: 10.5
min: 0.04
max:0.10
0.75
max
2.0
max
0.45
max
0.03
max
0.10
max
STAINLESS STEEL 304H STRIP MECHANICAL PROPERTIES:
Grade Tensile Strength
ksi (min.)
Yield Strength 0.2%
Offset ksi (min.)
Elongation -
% in
50 mm (min.)
Hardness
(Brinell) MAX
Hardness
(Rockwell B) MAX
304H 75 30 40 201 92
STAINLESS STEEL 304H STRIP PHYSICAL PROPERTIES:
Denstiy
lbm/in3
Coefficient of
Thermal Expansion (min/in)-°F
Thermal Conductivity BTU/hr-ft-°F Specific Heat BTU/lbm -°F Modules of Elasticity (annealed)2-psi
at 68 °F at 68 – 212°F at 68 – 1600°F at 212°F at 932°F at 32 – 212°F in tension (E)
0.285 9.2 11.0 9.4 12.4 0.12 29 x 106

Harsh steel Supplies and Exports Stainless steel 304H strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -


Harsh steel provided the Specification of Stainless steel 304H strips as below: -
  • Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
  • Material can be supplied in coil or length form
  • Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 304H STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 304H STRIPS EXPORTER
Author Rating
5starstarstarstarstar