Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S30100 Strips, SS 301 Strips, AISI SS 301 Stainless Steel 301 Strips Supplier, Manufacturer and Exporter in India


Din 1.4310 SS 301 Strips, SS UNS S30100 Strips, Stainless Steel 301 Strips, 301 Stainless Steel 301 Strips Suppliers in India.

STAINLESS STEEL 301 STRIP GENERAL PROPERTIES:

Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, and full hard.




Harsh steel Export and Supply Stainless steel 301 strips capabilities include:

  • Stainless steel 301 strips Annealed & Precision
  • Stainless steel 301 strips thickness-0.1mm to 6.00mm
  • Stainless steel 301 strips width-2.5mm to 1320mm (slit to close tolerances)


Harsh steel provides Stainless steel 301 Cold rolled mill finish strips such as:

  • Stainless steel 301 strips 2D - cold rolled, heat treated, pickled.
  • Stainless steel 301 strips 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
  • Stainless steel 301 strips 2R(BA) - cold rolled, bright annealed
  • Stainless steel 301 strips HR - hot rolled, annealed

STAINLESS STEEL 301 STRIP APPLICATIONS:

High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include:

  • aircraft structural parts
  • trailer bodies
  • utensils
  • architectural and automotive rim
  • roof drainage products
  • conveyor belts
  • variety of industrial applications.

STAINLESS STEEL 301 STRIP CORROSION RESISTANCE:

  • Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures.
  • Resists outdoor, industrial, marine, and mild chemical environments
  • susceptible to carbide precipitation during welding, which restricts its use in some applications
  • Similar to resistance of Stainless Steel grade 304

STAINLESS STEEL 301 STRIP HEAT RESISTANCE:
  • Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C).
  • Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
  • Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C).

STAINLESS STEEL 301 STRIP HEAT TREATMENT:
  • Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly.
  • Use low side of range for intermediate annealing.
  • This grade cannot be hardened by thermal treatment.


STAINLESS STEEL 301 STRIP COLD WORKING:
  • hardens at high rate, creating a very high strength from cold rolling and from roll forming.
  • more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
  • strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process.
  • severe cold deformation can still occur, due to residual ductility.
  • Grade 301 becomes strongly magnetic when cold rolled.


STAINLESS STEEL 301 STRIP WELDING:
  • must be annealed for maximum corrosion resistance
  • more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
  • must be annealed for maximum corrosion resistance
  • Welding and post weld annealing will both remove high strength induced by prior cold rolling.
  • Spot welding is commonly used to assemble cold rolled 301 components..
  • material will lose temper in the heat affected weld zone.

STAINLESS STEEL 301 STRIP CHEMICAL PROPERTIES:
%   Cr Ni C Si Mn P S N
301 Min: 16 6 - - - - -

 -

Max:  18  8 0.15  1.00 2.0  0.045  0.030  0.10
STAINLESS STEEL 301 STRIP MECHANICAL PROPERTIES:
Grade/Temper Tensile Strength ksi (min.) Yield Strength 0.2% ksi (min.) Elongation -% in 50 mm (min.)
301 1/4 125 75 25
301 1/2 150 110 18
301 Full Hard 185 140 9
STAINLESS STEEL 301 STRIP PHYSICAL PROPERTIES:
Denstiy lbm/in3 Coefficient of Thermal Expansion (min/in)-°F Electrical Resistivity mW-in Thermal Conductivity BTU/hr-ft-°F Melting Range
0.29 at 68 – 212°F at 68 – 932°F at 68 – 1450°F at 68°F at 212°F at 392°F at 752°F at 1112°F at 1472°F at 68 – 212°F  2550-2590°F
9.2 10.4 10.9 28.3 30.7 33.8 39.4 43.7 47.6 9.4

Harsh steel Supplies and Exports Stainless steel 301 strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -


Harsh steel provided the Specification of Stainless steel 301 strips as below: -
  • Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
  • Material can be supplied in coil or length form
  • Hardness of material to customer's specific requirements.

We export our STAINLESS STEEL 301 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 301 STRIPS EXPORTER
Author Rating
5starstarstarstarstar