UNS S44000 Strips, SS 440 Strips, Stainless Steel 440 Sheets Supplier, Manufacturer and Exporter in India
Din 1.4125 SS 440 Strips, SS UNS S44000 Coils, Stainless Steel 440 Strips, 440 Stainless Steel Strips Suppliers in India.
STAINLESS STEEL 440 STRIP GENERAL PROPERTIES:
Stainless steels 440 Strips are high-alloy steels which have high corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are divided into three types such as ferritic, austenitic, and martensitic steels. Another group of stainless steels are precipitation-hardened steels. They are a combination of martensitic and austenitic steels. Grade 440C stainless steel strip is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C strip is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which make 440C particularly suited to such applications as ball bearings and valve parts.
Harsh steel Export and Supply Stainless steel 440 strips capabilities include:
- Stainless steel 440 strips Annealed & Precision
- Stainless steel 440 strips thickness-0.1mm to 6.00mm
- Stainless steel 440 strips width-2.5mm to 1320mm (slit to close tolerances)
Harsh steel provides Stainless steel 440 Cold rolled mill finish strips such as:
- Stainless steel 440 strips 2D - cold rolled, heat treated, pickled.
- Stainless steel 440 strips 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
- Stainless steel 440 strips 2R(BA) - cold rolled, bright annealed
- Stainless steel 440 strips HR - hot rolled, annealed
STAINLESS STEEL 440 STRIP APPLICATIONS:
Typical applications include:
- Rolling element bearings
- Valve seats
- High quality knife blades
- Surgical instruments
- Chisels
STAINLESS STEEL 440 STRIP CORROSION RESISTANCE:
Good resistance to the atmosphere, fresh water, foods, alkalies and mild acids. Best resistance in the hardened and tempered and passivated condition. A smooth polished surface also assists.
The corrosion resistance of grade 440C approximates that of grade 304 in many environments.
STAINLESS STEEL 440 STRIP HEAT RESISTANCE:
Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties by over-tempering.
STAINLESS STEEL 440 STRIP HEAT TREATMENT:
Annealing – Full anneal – 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing – 735-785°C and slow furnace cool.
Hardening – Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table.
Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance.
STAINLESS STEEL 440 STRIP WELDING:
If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility.
STAINLESS STEEL 440 STRIP MACHINING:
In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel. Chips are tough and stringy so chip breakers are important. If these grades are hardened machining becomes more difficult and probably impossible.
STAINLESS STEEL 440 STRIP COMPOSITION:
|
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
|
|---|---|---|---|---|---|---|---|---|---|---|
|
440C |
min. max. |
0.95 1.20 |
- 1.00 |
- 1.00 |
- 0.040 |
- 0.030 |
16.00 18.00 |
- 0.75 |
- |
- |
STAINLESS STEEL 440 STRIP MECHANICAL PROPERTIES:
|
Tempering Temperature (°C) |
Tensile Strength (MPa) |
Yield Strength 0.2% Proof (MPa) |
Elongation (% in 50mm) |
Hardness Rockwell (HR C) |
Impact Charpy V (J) |
|---|---|---|---|---|---|
|
Annealed* |
758 |
448 |
14 |
269HB max# |
- |
|
204 |
2030 |
1900 |
4 |
59 |
9 |
|
260 |
1960 |
1830 |
4 |
57 |
9 |
|
316 |
1860 |
1740 |
4 |
56 |
9 |
|
371 |
1790 |
1660 |
4 |
56 |
9 |
| * Annealed properties are typical for Condition A of ASTM A276# Brinell Hardness is ASTM A276 specified maximum for annealed 440A, B and C. | |||||
STAINLESS STEEL 440 STRIP PHYSICAL PROPERTIES:
|
Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion (mm/m/°C) |
Thermal Conductivity(W/m.K) |
Specific Heat |
Electrical Resistivity (nW.m) |
|||
|---|---|---|---|---|---|---|---|---|---|
|
0-100°C |
0-200°C |
0-600°C |
at 100°C |
at 500°C |
|||||
|
440 C |
7650 |
200 |
10.1 |
10.3 |
11.7 |
24.2 |
- |
460 |
600 |
STAINLESS STEEL 440 STRIP POSSIBLE ALTERNATIVE GRADES:
|
Grade |
Why it might be chosen instead of 440C |
|---|---|
|
440A/B |
Slightly softer and more corrosion resistant grade needed |
|
440F |
High machinability required, with same hardness and hardenability as 440C |
|
420 |
Lower strength and hardness needed than any of the 440 grades |
|
416 |
Higher machinability required, and the much lower hardness and strength is still adequate |
Harsh steel Supplies and Exports Stainless steel 440 Strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications:-
Harsh steel provided the Specification of Stainless steel 440 strips as below:-
- Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
- Material can be supplied in coil or length form
- Hardness of material to customer's specific requirements.
We export our STAINLESS STEEL 440 STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.
