Stainless Steel 904L Strips, UNS N08904 Strips Supplier & Exporter

STAINLESS STEEL 904L STRIP AVAILABILITY:

• Seamless Pipe 1/2" W

STAINLESS STEEL 904L STRIP DESCRIPTION:

904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.

STAINLESS STEEL 904L STRIP DESIGN FEATURES:

• Good resistance to pitting and crevice corrosion.
• Very good resistance to stress corrosion cracking.
• Good resistance to intergranular corrosion.
• Good formability and weldability.
• Maximum service temperatures of 450 deg.C. (824 deg.F).

STAINLESS STEEL 904L STRIP TYPICAL APPLICATIONS:

• Production and transport of sulfuric acid
• Metal pickling in sulfuric acid
• Production and concentration of phosphoric acid
• Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
• Paper and allied industries
• Gas washing
• Chemical and pharmaceutical industries

STAINLESS STEEL 904L STRIP TENSILE REQUIREMENTS:

• Tensile Strength (KSI) 70
• Yield Strength (KSI) 25
• KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

STAINLESS STEEL 904L STRIP CHEMICAL COMPOSITION:

Harsh steel Supplies and Exports Stainless steel 904L strips from 2.5mm wide to 400mm, slit to close tolerances. We supply in below specifications: -

Harsh steel provided the Specification of Stainless steel 904L strips as below: -

• Material is manufactured on a bespoke basis to the customer's individual needs and hardness.
• Material can be supplied in coil or length form
• Hardness of material to customer's specific requirements.

Harsh steel Export and Supply Stainless steel 904L strips capabilities include:

• Annealed & Precision
• thickness 0.1mm to 6.00mm
• width 2.5mm to 1320mm (slit to close tolerances)

Harsh steel provides Stainless steel 904L Cold rolled mill finish strips such as:

• 2D - cold rolled, heat treated, pickled.
• 2B - cold rolled, heat treated, pickled, skin passed on bright rolls.
• 2R(BA) - cold rolled, bright annealed
• HR - hot rolled, annealed

We export our STAINLESS STEEL 904L STRIPS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.

Enquiry