UNS S15500 Flanges, Precipitation Hardening SS 15-5PH Flanges, AISI SS 15-5PH Stainless Steel 17-7PH Flanges Supplier, Manufacturer and Exporter in India
Din 1.4545 SS 15-5PH Flanges, SS UNS S15500 Flanges, Precipitation Hardening Stainless Steel 17-7PH Flanges, Precipitation Hardening Stainless Steel 15-5PH Flanges Suppliers in India.
Stainless steel 15 – 5 PH, also known as UNS S15500 or XM-12, is a modification of 17-4 PH developed in the 60′s. UNS S15500 stainless steel has a more refined microstructure as a result of the remelting process in which it was developed. This refined structure enhances toughness, especially in the transverse direction of the material. UNS S15500 also has excellent corrosion resistance, good fabricating characteristics and low temperature hardening which makes Stainless Steel 15 – 5 PH® the preferred alloy for many industries.
The composition of UNS S15500 includes small amounts of carbon, manganese, phosphorus, columbium (or niobium), tantalum, silicon and sulphur. 15500 can be forged, welded and formed. Machining may be performed in the solution-annealed state or in the final heat treat condition. Desired mechanical properties such as ductility and strength can be achieved through heating the material at various temperatures.
UNS S15500 is a martensitic precipitation hardening grade. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
HEAT TREATED 15-5PH STAINLESS STEEL
Heat treatments are used to strengthen 15-5 alloys. There are eight standard conditions for 15-5 stainless steel after treatment - H 900, H 925, H 1025, H 1075, H 1100, H 1150 and H 1150-M. Heat treating 15-5 PH follows the following steps:
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Conditioning using austenite.
- Air cooling, which turns the austenite into martensitic.
- Precipitation hardening until the desired condition is reached.
Harsh steel provides the following 15-5ph products as below:-
- Sheet and Plate
- AMS 5862
- BMS 7-240
- Bar/Forging
- AMS 5659
- ASTM-A-484
- ASTM-A-564
15-5 PH can be further heat-treated when in precipitation-hardened condition to provide improved resistance to stress corrosion cracking for high temperature applications. Fabrication is recommended after the metal has been heat treated to minimize distortion and stress.
Harsh steel also carries a number of other stainless steel alloys, including347 Stainless, A-286, 321 Stainless, 13-8 MO, AM 350, 17-4 PH Stainless,15-7 MO, 17-7 PH Stainless and 410 Stainless.
Industries that use 15500 include:
- Aerospace
- Chemical
- Food processing
- General metal working
- Paper industries
- Petrochemical
Products partially or completely constructed of 15500 include:
- Aircraft components
- Cylinders
- Engine parts
- Fittings
- Gears
- Hallow shafts
- Marine gas turbine compressor sections
- Paper mill equipment
- Shafts
- Valves
Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
---|---|---|---|---|---|---|---|
15-5 PH | H900 | 190,000 | 170,000 | 6 | 15 | 388 | C40 |
H1025 | 155,000 | 145,000 | 8 | 27 | 331 | C35 | |
H1075 | 145,000 | 125,000 | 9 | 28 | 311 | C32 | |
H1150 | 135,000 | 105,000 | 11 | 30 | 277 | C28 | |
H1150-M | 115,000 | 75,000 | 14 | 35 | 255 | C24 |
ASME/ANSI B16.5 | Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
---|---|
Pressure Class | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B16.47 | Welding Neck Flange, Blind Flange (Series A & B) |
Pressure Class | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange |
Pressure Class | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105) |
Pressure Class | PN 2.5 to PN 100 |
Din Flanges | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 |
Pressure Class | PN 6 to PN 100 |
ANFOr NFE 29-230 | Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21) |
Pressure Class | Iso - PN 2.5 to PN 40 |
Pr EN 1092-1 Flanges | Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21) |
Pressure Class | PN 2.5 to PN 100 |
ASME/ANSI B 16.9/MSS SP-4 | Stub End |
Type | A, B, C |
Metal | Grade | UNS Number |
---|---|---|
Austenitic / Ferritic / Austenitic / Stainless Steel | F304 / F304H / F304L * F309* F310* / F310H* F316 / F316H / F316L* F317 / F317L* F321 / F321H* F347 / F347H* F51 (2205)* / F60* F53 (2507)* F446* |
S30400 / S30409 / S30403 S30900 S31000 / S31009 S31600 / S31609 / S31603 S31700 / S31703 S32100 / S32109 S34700 / S34709 S31803 / S32205 S32750 S44600 |
Ferritic / Martensitic Alloys | F1* F5 / F5 A* F6 CL 1, 2, 3, 4, (F410)* F9* F11 CL 1, 2, 3* F22 CL 1, 3* F91* F12 CL 2* |
K12822 K41545 / K42544 S41000 K90941 K11597 / K11572 K21590 K90901 K11564 |
Nickel & Nickel Based Alloys | Nickel 200* Nickel 201* Alloy 400* Alloy 600* Alloy 601 Alloy 625 Alloy 800 / 800H / 800HT* Alloy 825* Alloy 904L* Alloy 20* Alloy C276* |
N02200 N02201 N04400 N06600 N06601 N06625 N08800 / N08810 / N08811 N08825 N08904 N08020 N10276 |
Low Temperature Alloys | LF - 1* LF - 2* LF - 3* A707 L3* A694 F42 - F65* A350 LF6* |
K03009 K03011 K32025 |
Aluminum Alloys | Alum 3003*
Alum 6061 |
A93003
A96061 |
Copper - Nickel Alloys | 70/30 90/10 |
C71500 C70600 |
ASTM | 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51 |
---|---|
DIN | WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462 |
AFNOR (NF E) | BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12 |
STAINLESS STEEL FLANGES
A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.
GRADES A316/316L and A304/304L
- Weld Neck
- Sch10, Sch40 and Sch80 Bore
- Classes 150, 300, 600, 900, 1500
- Sizes: ½" to 24"
- Slip-On
- Classes 150, 300, 600, 900, 1500
- Sizes: ½" to 24"
- Threaded
- Classes 150 & 300
- Sizes: ½" to 4"
- Lap Joint
- Class 150 only
- Sizes: 2" to 6"
- Blind
- Classes 150 & 300
- Sizes: ½" to 12"
- Hub Blind
- Classes 300, 600, 1500
- Sizes: ½" to 6"
- Socket Weld
- Sch40 & Sch80 Bore
- Classes 150, 300, 600
- Sizes: ½" to 2"
We export our PRECIPITATION HARDENING STAINLESS STEEL 15-5PH FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.