Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S20100 Flanges, SS 201 Flanges, AISI SS 201 Stainless Steel 201 Flanges Supplier, Manufacturer and Exporter in India


Din 1.4372 SS 201 Flanges, SS UNS S20100 Flanges, Stainless Steel 201 Flanges, 201 Stainless Steel 201 Flanges Suppliers in India.

DESCRBTION:

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications

PRODUCT FORMS:

Sheet, Strip


TYPICAL APPLICATIONS:

Typical applications for Types 201 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.


PROCESSING:

The annealing temperature for Type 201 is between 1850-2000°F. Rapid cooling through the carbide precipitation range (1500 – 800 o F) is necessary to keep the carbides in solution and prevent sensitization. Type 201 is not hardenable by thermal treatment; it is only hardenable by cold working.


FORMING:

Type 201 has similar bending, forming and drawing characteristics to Type 301 stainless steel


WELDING:

Type 201 can be welded by all conventional methods applied to 18 percent chromium, 8 percent nickel steels. Filler metal of the conventional chromium-nickel analyses can be used. Like other austenitic stainless steels where carbon is not controlled below 0.03%, Type 201 is susceptible to intergranular corrosion in the weld heat affected zone.


CORROSION:

Type 201 is resistant to a wide variety of mild to moderately corrosive environments. It has corrosion resistance approaching that of Types 301and has been successfully substituted for 304 in many mild environments.


CHEMICAL PROPERTIES:

Element Type 201
Carbon 0.15x
Manganese 5.5 - 7.5
Sulfur 0.03X
Phosphorus 0.060x
Silicon 1.0 x
Chromium 16 - 18
Nickel 3.5 -5.5
Nitrogen 0.25x

PHYSICAL PROPERTIES:

Density (lb./ in^2) @ RT 0.283
Modulus of Elasticity in Tension (psi x 10^6) 28.6
Specific Heat (BTU/o F/lb.) 32 to 212 oF 0.12
Thermal Conductivity (BTU/hr/ft^2/ft) 212oF 9.4
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) 32 to 212oF 8.7
32 to 600oF 9.7
32 to 1,000oF 10.2
Electrical Resistivity (micro ohms - cm) at 70oF 69
Melting Point Range (oF) 2550/2650
Oxidation Resistance - Continuous Service(oF) 1550
Oxidation Resistance - Intermittent Service(oF) 1500
TYPES AND SPECIFICATIONS:
ASME/ANSI B16.5 Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
Pressure Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B16.47 Welding Neck Flange, Blind Flange (Series A & B)
Pressure Class 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange
Pressure Class 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105)
Pressure Class PN 2.5 to PN 100
Din Flanges DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Pressure Class PN 6 to PN 100
ANFOr NFE 29-230 Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21)
Pressure Class Iso - PN 2.5 to PN 40
Pr EN 1092-1 Flanges Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21)
Pressure Class PN 2.5 to PN 100
ASME/ANSI B 16.9/MSS SP-4 Stub End
Type A, B, C
Metal Grade UNS Number
Austenitic / Ferritic / Austenitic / Stainless Steel F304 / F304H / F304L *
F309*
F310* / F310H*
F316 / F316H / F316L*
F317 / F317L*
F321 / F321H*
F347 / F347H*
F51 (2205)* / F60*
F53 (2507)*
F446*
S30400 / S30409 / S30403
S30900
S31000 / S31009
S31600 / S31609 / S31603
S31700 / S31703
S32100 / S32109
S34700 / S34709
S31803 / S32205
S32750
S44600
Ferritic / Martensitic Alloys F1*
F5 / F5 A*
F6 CL 1, 2, 3, 4, (F410)*
F9*
F11 CL 1, 2, 3*
F22 CL 1, 3*
F91*
F12 CL 2*
K12822
K41545 / K42544
S41000
K90941
K11597 / K11572
K21590
K90901
K11564
Nickel & Nickel Based Alloys Nickel 200*
Nickel 201*
Alloy 400*
Alloy 600*
Alloy 601
Alloy 625
Alloy 800 / 800H / 800HT*
Alloy 825*
Alloy 904L*
Alloy 20*
Alloy C276*
N02200
N02201
N04400
N06600
N06601
N06625
N08800 / N08810 / N08811
N08825
N08904
N08020
N10276
Low Temperature Alloys LF - 1*
LF - 2*
LF - 3*
A707 L3*
A694 F42 - F65*
A350 LF6*
K03009
K03011
K32025


Aluminum Alloys Alum 3003*
Alum 6061
A93003
A96061
Copper - Nickel Alloys 70/30
90/10
C71500
C70600
GRADES
ASTM 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51
DIN WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462
AFNOR (NF E) BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12

STAINLESS STEEL FLANGES

A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.


GRADES A316/316L and A304/304L

FLANGE
  • Weld Neck
  • Sch10, Sch40 and Sch80 Bore
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

FLANGE
  • Slip-On
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

flange
  • Threaded
  • Classes 150 & 300
  • Sizes: ½" to 4"

flange
  • Lap Joint
  • Class 150 only
  • Sizes: 2" to 6"

flange
  • Blind
  • Classes 150 & 300
  • Sizes: ½" to 12"

flange
  • Hub Blind
  • Classes 300, 600, 1500
  • Sizes: ½" to 6"

flange
  • Socket Weld
  • Sch40 & Sch80 Bore
  • Classes 150, 300, 600
  • Sizes: ½" to 2"

We export our STAINLESS STEEL 201 FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 201 FLANGES
Author Rating
5starstarstarstarstar