Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S41000 Flanges, SS 410 Flanges, AISI SS 410 Stainless Steel 410 Flanges Supplier, Manufacturer and Exporter in India


Din 1.4006 SS 410 Flanges, SS UNS S41000 Flanges, Stainless Steel 410 Flanges, 410 Stainless Steel Flanges Suppliers in India.

Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it's been hardened, tempered, and then polished.

APPLICATIONS:-

Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Alloy 410. Examples of applications that frequently used Alloy 410 include:


  • Cutlery
  • Steam and gas turbine blades
  • Kitchen utensils
  • Bolts, nuts, screws
  • Pump and valve parts and shafts
  • Mine ladder rugs
  • Dental and surgical instruments
  • Nozzles
  • Hardened steel balls and seats for oil well pumps

CORROSION RESISTANCE:

  • Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
  • Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
  • Good corrosion resistance to low concentrations of mild organic and mineral acids

WELDING CHARACTERISTICS:

  • Readily welded by all standard methods
  • To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400°F (177 to 204°C;)
  • Post weld annealing is recommended to retain maximum ductility

Heat Treatment

  • The proper hot work range is 2000 to 2200°F (1093 to 1204°C;)
  • Do not work this material below 1650oF (899°C;)

CHEMICAL PROPERTIES:-

C Mn Si P S Cr Ni
410 0.15 max 1.00 max 1.00 max 0.04 max 0.03 max min: 11.5
max: 13.5
0.50 max

MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
410 65 (450) 30 (205) 20 217 96

Mechanical Properties of Heat Treated 410:

Heat Treatment T410 (0.14%C) Hardened 1800°F (982°C)
Rockwell Hardness 0.2% YS, Ksi (MPa) UTS, Ksi (MPa)
Annealed* 81 HRB 45.4 (313) 80.4 (554)
Hardened & Tempered 400°F (204°C) 43 HRC 156.1 (1076) 202.9 (1399)
Hardened & Tempered 550°F (288°C) 40 HRC 148.3 (1022) 187.0 (1289)
Hardened & Tempered 600°F (316°C) 40 HRC 148.8 (1026) 186.1 (1283)
Hardened & Tempered 800°F (427°C) 41 HRC 132.9 (916) 188.5 (1300)
Hardened & Tempered 900°F (482°C) 41 HRC 122.6 (845) 154.3 (1063)
Hardened & Tempered 1000°F (538°C) 35 HRC 127.9 (882) 154.3 (1063)
Hardened & Tempered 1200°F (649°C) 98 HRB 85.5 (589) 111.2 (767)

PHYSICAL PROPERTIES:

Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.276 14.4 at 212°F 56 at 68°F 29 5.90 at 68 – 392°F 0.11 at 68°F to 212°F 2700 to 2790
6.5 at 68 – 1112°F
TYPES AND SPECIFICATIONS:
ASME/ANSI B16.5 Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
Pressure Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B16.47 Welding Neck Flange, Blind Flange (Series A & B)
Pressure Class 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange
Pressure Class 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105)
Pressure Class PN 2.5 to PN 100
Din Flanges DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Pressure Class PN 6 to PN 100
ANFOr NFE 29-230 Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21)
Pressure Class Iso - PN 2.5 to PN 40
Pr EN 1092-1 Flanges Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21)
Pressure Class PN 2.5 to PN 100
ASME/ANSI B 16.9/MSS SP-4 Stub End
Type A, B, C
Metal Grade UNS Number
Austenitic / Ferritic / Austenitic / Stainless Steel F304 / F304H / F304L *
F309*
F310* / F310H*
F316 / F316H / F316L*
F317 / F317L*
F321 / F321H*
F347 / F347H*
F51 (2205)* / F60*
F53 (2507)*
F446*
S30400 / S30409 / S30403
S30900
S31000 / S31009
S31600 / S31609 / S31603
S31700 / S31703
S32100 / S32109
S34700 / S34709
S31803 / S32205
S32750
S44600
Ferritic / Martensitic Alloys F1*
F5 / F5 A*
F6 CL 1, 2, 3, 4, (F410)*
F9*
F11 CL 1, 2, 3*
F22 CL 1, 3*
F91*
F12 CL 2*
K12822
K41545 / K42544
S41000
K90941
K11597 / K11572
K21590
K90901
K11564
Nickel & Nickel Based Alloys Nickel 200*
Nickel 201*
Alloy 400*
Alloy 600*
Alloy 601
Alloy 625
Alloy 800 / 800H / 800HT*
Alloy 825*
Alloy 904L*
Alloy 20*
Alloy C276*
N02200
N02201
N04400
N06600
N06601
N06625
N08800 / N08810 / N08811
N08825
N08904
N08020
N10276
Low Temperature Alloys LF - 1*
LF - 2*
LF - 3*
A707 L3*
A694 F42 - F65*
A350 LF6*
K03009
K03011
K32025


Aluminum Alloys Alum 3003*
Alum 6061
A93003
A96061
Copper - Nickel Alloys 70/30
90/10
C71500
C70600
GRADES
ASTM 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51
DIN WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462
AFNOR (NF E) BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12

STAINLESS STEEL FLANGES

A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.


GRADES A316/316L and A304/304L

FLANGE
  • Weld Neck
  • Sch10, Sch40 and Sch80 Bore
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

FLANGE
  • Slip-On
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

flange
  • Threaded
  • Classes 150 & 300
  • Sizes: ½" to 4"

flange
  • Lap Joint
  • Class 150 only
  • Sizes: 2" to 6"

flange
  • Blind
  • Classes 150 & 300
  • Sizes: ½" to 12"

flange
  • Hub Blind
  • Classes 300, 600, 1500
  • Sizes: ½" to 6"

flange
  • Socket Weld
  • Sch40 & Sch80 Bore
  • Classes 150, 300, 600
  • Sizes: ½" to 2"

We export our STAINLESS STEEL 410 FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 410 FLANGES
Author Rating
5starstarstarstarstar