Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

ASTM B366 Flanges, ASME SB366 Flanges, Stainless Steel 904L Flanges Supplier, Manufacturer and Exporter in India


Din 1.4539 Stainless Steel 904L Flanges, UNS N08904 Flanges, Stainless Steel 904L Flanges, Stainless Steel 904L Flanges Suppliers in India.

AVAILABILITY:-

  • Seamless Pipe 1/2" W

SPECIFICATION:-

  • ASTM B677, B366
  • ASME SB677, SB366

DESCRIPTION:-

904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.


DESIGN FEATURES:-

  • Good resistance to pitting and crevice corrosion.
  • Very good resistance to stress corrosion cracking.
  • Good resistance to intergranular corrosion.
  • Good formability and weldability.
  • Maximum service temperatures of 450 deg.C. (824 deg.F).

TYPICAL APPLICATIONS:-

  • Production and transport of sulfuric acid
  • Metal pickling in sulfuric acid
  • Production and concentration of phosphoric acid
  • Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
  • Paper and allied industries
  • Gas washing
  • Chemical and pharmaceutical industries

TENSILE REQUIREMENTS:-

  • Tensile Strength (KSI) 70
  • Yield Strength (KSI) 25
  • KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

CHEMICAL COMPOSITION:-

C Cr Cu Mn Mo Ni P S Si
Max Max Max Max Max
0.02 19.0-23.0 1.0-2.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0
TYPES AND SPECIFICATIONS:
ASME/ANSI B16.5 Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
Pressure Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B16.47 Welding Neck Flange, Blind Flange (Series A & B)
Pressure Class 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange
Pressure Class 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105)
Pressure Class PN 2.5 to PN 100
Din Flanges DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Pressure Class PN 6 to PN 100
ANFOr NFE 29-230 Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21)
Pressure Class Iso - PN 2.5 to PN 40
Pr EN 1092-1 Flanges Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21)
Pressure Class PN 2.5 to PN 100
ASME/ANSI B 16.9/MSS SP-4 Stub End
Type A, B, C
Metal Grade UNS Number
Austenitic / Ferritic / Austenitic / Stainless Steel F304 / F304H / F304L *
F309*
F310* / F310H*
F316 / F316H / F316L*
F317 / F317L*
F321 / F321H*
F347 / F347H*
F51 (2205)* / F60*
F53 (2507)*
F446*
S30400 / S30409 / S30403
S30900
S31000 / S31009
S31600 / S31609 / S31603
S31700 / S31703
S32100 / S32109
S34700 / S34709
S31803 / S32205
S32750
S44600
Ferritic / Martensitic Alloys F1*
F5 / F5 A*
F6 CL 1, 2, 3, 4, (F410)*
F9*
F11 CL 1, 2, 3*
F22 CL 1, 3*
F91*
F12 CL 2*
K12822
K41545 / K42544
S41000
K90941
K11597 / K11572
K21590
K90901
K11564
Nickel & Nickel Based Alloys Nickel 200*
Nickel 201*
Alloy 400*
Alloy 600*
Alloy 601
Alloy 625
Alloy 800 / 800H / 800HT*
Alloy 825*
Alloy 904L*
Alloy 20*
Alloy C276*
N02200
N02201
N04400
N06600
N06601
N06625
N08800 / N08810 / N08811
N08825
N08904
N08020
N10276
Low Temperature Alloys LF - 1*
LF - 2*
LF - 3*
A707 L3*
A694 F42 - F65*
A350 LF6*
K03009
K03011
K32025


Aluminum Alloys Alum 3003*
Alum 6061
A93003
A96061
Copper - Nickel Alloys 70/30
90/10
C71500
C70600
GRADES
ASTM 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51
DIN WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462
AFNOR (NF E) BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12

STAINLESS STEEL FLANGES

A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.


GRADES A316/316L and A304/304L

FLANGE
  • Weld Neck
  • Sch10, Sch40 and Sch80 Bore
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

FLANGE
  • Slip-On
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

flange
  • Threaded
  • Classes 150 & 300
  • Sizes: ½" to 4"

flange
  • Lap Joint
  • Class 150 only
  • Sizes: 2" to 6"

flange
  • Blind
  • Classes 150 & 300
  • Sizes: ½" to 12"

flange
  • Hub Blind
  • Classes 300, 600, 1500
  • Sizes: ½" to 6"

flange
  • Socket Weld
  • Sch40 & Sch80 Bore
  • Classes 150, 300, 600
  • Sizes: ½" to 2"

We export our STAINLESS STEEL 904L FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 904L FLANGES
Author Rating
5starstarstarstarstar