UNS S30100 Flanges, SS 301 Flanges, AISI SS 301 Stainless Steel 301 Flanges Supplier, Manufacturer and Exporter in India
Din 1.4310 SS 301 Flanges, SS UNS S30100 Flanges, Stainless Steel 301 Flanges, 301 Stainless Steel 301 Flanges Suppliers in India.
GENERAL PROPERTIES:-
Stainless steel grade 301 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers. It can be obtained in the 1/4 hard, 1/2 hard, and full hard.
APPLICATIONS:-
High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include:
- aircraft structural parts
- trailer bodies
- utensils
- architectural and automotive rim
- roof drainage products
- conveyor belts
- variety of industrial applications.
CORROSION RESISTANCE:-
- Good resistance in applications involving external exposure to mildly corrosive conditions at ambient temperatures.
- Resists outdoor, industrial, marine, and mild chemical environments
- susceptible to carbide precipitation during welding, which restricts its use in some applications
- Similar to resistance of Stainless Steel grade 304
HEAT RESISTANCE:-
- Can be exposed continuously without appreciable scaling to a max of 1600°F(871°C).
- Maximum exposure temperature is about 1450°F (788°C), for intermittent exposure
- Has an oxidation weight gain of 10mg/cm 2 in 1,000 hours, in temperatures over 1600°F (871°C).
HEAT TREATMENT:-
- Solution Treatment (Annealing) – Heat to 1010-1120°C and cool rapidly.
- Use low side of range for intermediate annealing.
- This grade cannot be hardened by thermal treatment.
COLD WORKING:-
- hardens at high rate, creating a very high strength from cold rolling and from roll forming.
- more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
- strain-hardened austenitite steel undergoes partial transformation into martensitite steel during this process.
- severe cold deformation can still occur, due to residual ductility.
- Grade 301 becomes strongly magnetic when cold rolled.
WELDING:-
- must be annealed for maximum corrosion resistance
- more difficult to work than other austenitic stainless steels, due to its high work hardening rate..
- must be annealed for maximum corrosion resistance
- Welding and post weld annealing will both remove high strength induced by prior cold rolling.
- Spot welding is commonly used to assemble cold rolled 301 components..
- material will lose temper in the heat affected weld zone.
CHEMICAL PROPERTIES:
% | Cr | Ni | C | Si | Mn | P | S | N | |
---|---|---|---|---|---|---|---|---|---|
301 | Min: | 16 | 6 | - | - | - | - | - | - |
Max: | 18 | 8 | 0.15 | 1.00 | 2.0 | 0.045 | 0.030 | 0.10 |
MECHANICAL PROPERTIES:
Grade/Temper | Tensile Strengthksi (min.) | Yield Strength 0.2%ksi (min.) | Elongation -% in 50 mm (min.) |
---|---|---|---|
301 1/4 | 125 | 75 | 25 |
301 1/2 | 150 | 110 | 18 |
301 Full Hard | 185 | 140 | 9 |
PHYSICAL PROPERTIES:
Denstiylbm/in3 | Coefficient ofThermal Expansion (min/in)-°F | Electrical Resistivity mW-in | Thermal Conductivity BTU/hr-ft-°F | MeltingRange | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.29 | at 68 – 212°F | at 68 – 932°F | at 68 – 1450°F | at 68°°F | at 212°F | at 392°F | at 752°F | at 1112°F | at 1472°F | at 68 – 212°F | 2550-2590°F |
9.2 | 10.4 | 10.9 | 28.3 | 30.7 | 33.8 | 39.4 | 43.7 | 47.6 | 9.4 |
ASME/ANSI B16.5 | Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
---|---|
Pressure Class | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B16.47 | Welding Neck Flange, Blind Flange (Series A & B) |
Pressure Class | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange |
Pressure Class | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105) |
Pressure Class | PN 2.5 to PN 100 |
Din Flanges | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 |
Pressure Class | PN 6 to PN 100 |
ANFOr NFE 29-230 | Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21) |
Pressure Class | Iso - PN 2.5 to PN 40 |
Pr EN 1092-1 Flanges | Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21) |
Pressure Class | PN 2.5 to PN 100 |
ASME/ANSI B 16.9/MSS SP-4 | Stub End |
Type | A, B, C |
Metal | Grade | UNS Number |
---|---|---|
Austenitic / Ferritic / Austenitic / Stainless Steel | F304 / F304H / F304L * F309* F310* / F310H* F316 / F316H / F316L* F317 / F317L* F321 / F321H* F347 / F347H* F51 (2205)* / F60* F53 (2507)* F446* |
S30400 / S30409 / S30403 S30900 S31000 / S31009 S31600 / S31609 / S31603 S31700 / S31703 S32100 / S32109 S34700 / S34709 S31803 / S32205 S32750 S44600 |
Ferritic / Martensitic Alloys | F1* F5 / F5 A* F6 CL 1, 2, 3, 4, (F410)* F9* F11 CL 1, 2, 3* F22 CL 1, 3* F91* F12 CL 2* |
K12822 K41545 / K42544 S41000 K90941 K11597 / K11572 K21590 K90901 K11564 |
Nickel & Nickel Based Alloys | Nickel 200* Nickel 201* Alloy 400* Alloy 600* Alloy 601 Alloy 625 Alloy 800 / 800H / 800HT* Alloy 825* Alloy 904L* Alloy 20* Alloy C276* |
N02200 N02201 N04400 N06600 N06601 N06625 N08800 / N08810 / N08811 N08825 N08904 N08020 N10276 |
Low Temperature Alloys | LF - 1* LF - 2* LF - 3* A707 L3* A694 F42 - F65* A350 LF6* |
K03009 K03011 K32025 |
Aluminum Alloys | Alum 3003*
Alum 6061 |
A93003
A96061 |
Copper - Nickel Alloys | 70/30 90/10 |
C71500 C70600 |
ASTM | 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51 |
---|---|
DIN | WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462 |
AFNOR (NF E) | BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12 |
STAINLESS STEEL FLANGES
A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.
GRADES A316/316L and A304/304L
- Weld Neck
- Sch10, Sch40 and Sch80 Bore
- Classes 150, 300, 600, 900, 1500
- Sizes: ½" to 24"
- Slip-On
- Classes 150, 300, 600, 900, 1500
- Sizes: ½" to 24"
- Threaded
- Classes 150 & 300
- Sizes: ½" to 4"
- Lap Joint
- Class 150 only
- Sizes: 2" to 6"
- Blind
- Classes 150 & 300
- Sizes: ½" to 12"
- Hub Blind
- Classes 300, 600, 1500
- Sizes: ½" to 6"
- Socket Weld
- Sch40 & Sch80 Bore
- Classes 150, 300, 600
- Sizes: ½" to 2"
We export our STAINLESS STEEL 301 FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.