Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

UNS S40500 Flanges, SS 405 Flanges, AISI SS 405 Stainless Steel 405 Flanges Supplier, Manufacturer and Exporter in India


Din 1.4002 SS 405 Flanges, SS UNS S40500 Flanges, Stainless Steel 405 Flanges, 405 Stainless Steel Flanges Suppliers in India.

DESCRBTION:

GENERAL PROPERTIES:-

Alloy 405 is a 12% chromium stainless steel designed to be used in the as-welded condition. Unlike the other grades of 12% chromium stainless, 405 is not vulnerable to extensive hardening through air cooling from high temperatures.
Specifications: UNS S40500


APPLICATIONS:-

Applications that frequently use alloy 405 include, but are not limited to:

  • Steam nozzles
  • Partitions
  • Annealing boxes
  • Quenching racks
  • Fabrications that cannot be annealed after welding


CORROSION RESISTANCE:

  • Same corrosion resistance of Type 410 Steel
  • Used in situations where more weldability is desired than Type 410


MACHINABILITY

  • Type 405 can be easily machined due to its soft and ductile characteristics


WELDABILITY

  • Can be welded using shielded fusion and resistance techniques
  • Oxyacetylene is not recommended
  • Post weld annealing will maximize ductility

CHEMICAL PROPERTIES:-

C Cr Fe Mn Si S P Ni Al
405 0.08 max min: 11.5
max: 14.5
balance 1.0
max
1.0
max
0.03
max
0.04
max
0.50
max
min: 0.1
max: 0.3

MECHANICAL PROPERTIES:

Grade Tensile Strength ksi (MPa) min Yield Strength 0.2% offset ksi (MPa) min Elongation (% in 50mm) min Hardness (Brinell) MAX Hardness (Rockwell B) MAX
405 60
(415)
25
(170)
20 179 88

PHYSICAL PROPERTIES:

Denstiy
lbm/in3
Coefficient of
Thermal Expansion (min/in)-°F
Thermal Conductivity BTU/hr-ft-°F Specific Heat BTU/lbm -°F Modules of Elasticity (annealed)2-psi
at 68 °F at 68 – 212°F at 68 – 1832°F at 200°F at 32 – 212°F in tension (E)
0.279 9.2 20.5 416 0.11 28 x 106
TYPES AND SPECIFICATIONS:
ASME/ANSI B16.5 Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
Pressure Class 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B16.47 Welding Neck Flange, Blind Flange (Series A & B)
Pressure Class 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 (Orifice Flanges) Welding Neck Flange, Slipon Flange, Threaded Flange
Pressure Class 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Flange (111/134), Hubbed Slipon Flange (112), Hubbed Threaded Flange (113), Lapped Pipe End Flange (133), Plate Flange (101), Loose Plate Flange (102), Loose Plate with Weld-neck Flange (104), Blank Flange (105)
Pressure Class PN 2.5 to PN 100
Din Flanges DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Pressure Class PN 6 to PN 100
ANFOr NFE 29-230 Plate Flange (01), loose Plate Flange (02, 03, 04), Blind Flange (05), Welding Neck flange (11), Hubbed Slip on Flange (12), Screwed Flange (13),Hubbed Socket Welding Flange (14), Loose Hubbed Flange (15) Integral Flange (21)
Pressure Class Iso - PN 2.5 to PN 40
Pr EN 1092-1 Flanges Plate Flange (01), Loose Plate Flange (02, 04), Blind Flange (05), Welding Neck Flange (11), Hubbed Slip on flange (12), Screwed Flange (13), Integral Flange (21)
Pressure Class PN 2.5 to PN 100
ASME/ANSI B 16.9/MSS SP-4 Stub End
Type A, B, C
Metal Grade UNS Number
Austenitic / Ferritic / Austenitic / Stainless Steel F304 / F304H / F304L *
F309*
F310* / F310H*
F316 / F316H / F316L*
F317 / F317L*
F321 / F321H*
F347 / F347H*
F51 (2205)* / F60*
F53 (2507)*
F446*
S30400 / S30409 / S30403
S30900
S31000 / S31009
S31600 / S31609 / S31603
S31700 / S31703
S32100 / S32109
S34700 / S34709
S31803 / S32205
S32750
S44600
Ferritic / Martensitic Alloys F1*
F5 / F5 A*
F6 CL 1, 2, 3, 4, (F410)*
F9*
F11 CL 1, 2, 3*
F22 CL 1, 3*
F91*
F12 CL 2*
K12822
K41545 / K42544
S41000
K90941
K11597 / K11572
K21590
K90901
K11564
Nickel & Nickel Based Alloys Nickel 200*
Nickel 201*
Alloy 400*
Alloy 600*
Alloy 601
Alloy 625
Alloy 800 / 800H / 800HT*
Alloy 825*
Alloy 904L*
Alloy 20*
Alloy C276*
N02200
N02201
N04400
N06600
N06601
N06625
N08800 / N08810 / N08811
N08825
N08904
N08020
N10276
Low Temperature Alloys LF - 1*
LF - 2*
LF - 3*
A707 L3*
A694 F42 - F65*
A350 LF6*
K03009
K03011
K32025


Aluminum Alloys Alum 3003*
Alum 6061
A93003
A96061
Copper - Nickel Alloys 70/30
90/10
C71500
C70600
GRADES
ASTM 304/304L/304H, 316/316L/316H, 317/317L, 321/321H, 347/347H, 316Ti, F51
DIN WNR 1.4541, WNR 1.4571, WNR 1.4301, WNR 1.4306, WNR 1.4307, WNR 1.4401, WNR 1.4404, WNR 1.4438, WNR 1.4462
AFNOR (NF E) BF Z 3 CN 19-09, BF Z 7 CN 18-09, BF Z 6 CNT 18-10, BF Z 3 CND 17-11-02, BF Z 7 CND 17-11-02, BF Z 6 CNDT 17-12, BF Z 6 CNDNb 18-12

STAINLESS STEEL FLANGES

A wide variety of stainless steel flanges are all available at CCTF, including weld necks, slip-ons, threaded, socket weld, lap joints, blinds, and hub blinds.


GRADES A316/316L and A304/304L

FLANGE
  • Weld Neck
  • Sch10, Sch40 and Sch80 Bore
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

FLANGE
  • Slip-On
  • Classes 150, 300, 600, 900, 1500
  • Sizes: ½" to 24"

flange
  • Threaded
  • Classes 150 & 300
  • Sizes: ½" to 4"

flange
  • Lap Joint
  • Class 150 only
  • Sizes: 2" to 6"

flange
  • Blind
  • Classes 150 & 300
  • Sizes: ½" to 12"

flange
  • Hub Blind
  • Classes 300, 600, 1500
  • Sizes: ½" to 6"

flange
  • Socket Weld
  • Sch40 & Sch80 Bore
  • Classes 150, 300, 600
  • Sizes: ½" to 2"

We export our STAINLESS STEEL 405 FLANGES products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.



Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 405 FLANGES
Author Rating
5starstarstarstarstar