UNS S17700 Square Bars, Precipitation Hardening SS 17-7PH Square Bars, AISI SS 17-7PH Stainless Steel 17-7PH Square Bars Supplier, Manufacturer and Exporter in India
Din 1.4568 SS 17-7PH Square Bars, SS UNS S17700 Square Bars, Precipitation Hardening Stainless Steel 17-7PH Square Rods, Precipitation Hardening Stainless Steel 17-7PH Square Bars Suppliers in India.
17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.
Below you will find typical applications of 17-4 PH stainless steel as well as the metals composition and mechanical properties. Learn more about or value added services that we offer to help you expedite the current job you have at hand.
Best Stainless offers high quality standards including: UNS S17400, AMS 5643, ASTM A564, and ASTM A693 Grade 630.
17-4 PH stainless steel can be used for a variety of applications including: pump shafts, oil path, mechanical seals, and within the aerospace industry. Its composition is carbon, chromium, columbian + tantalum, copper, manganese, nickel, phosphorous, silicon, and sulfur.
APPLICATIONS
Pump Shafts
Oil Patch
Mechanical Seals
Aerospace
COMPOSITION
Carbon 0.070 max
Chromium 15.00 - 17.50
Columbian + Tantalum 0.15 - 0.45
Copper 3.00 - 5.00
Manganese1.00 max
Nickel 3.00 - 5.00
Phosphorus 0.040 max
Silicon 1.00 max
Sulfur 0.030 max
STANDARD
UNS S17400
AMS 5643
ASTM A564
ASTM A693 Grade 630
17-4PH SS MECHANICAL PROPERTIES
Material Type
Condition
Ultimate Tensile Strength (PSI)
0.2% Yield Strength (PSI)
Elongation (% In 2in.)
Reduction Of Area (%)
Hardness Brinell
Hardness Rockwell
17-4 PH
H900
190,000
170,000
10
40
388
C40
H1025
155,000
145,000
12
45
331
C35
H1075
145,000
125,000
13
45
311
C32
H1150
135,000
105,000
16
50
277
C28
H1150-M
115,000
75,000
18
55
255
C24
H1150-D
125,000
105,000
16
50
255 min - 311 max
C24 - 33
SQUARE BAR PRODUCT OVERVIEW:-
Stainless Steel Square Bar
Thickness Range of Stainless Plate
3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST)
Grades
202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
INVENTORY:-
X = Stocked Item
P = Call For availability square bar can be cut to size.
Square bar can be polished per customer specifications.
Square bar is stocked in Penn met 2000 for improved machinability.
Size in Inches
Wt per Ft
Wt per 12′
303
304/L
316/L
416
3/16″
0.120
1.440
X
X
X
P
1/4″
0.210
2.52
X
X
X
P
5/16″
0.330
3.96
X
X
X
X
3/8″
0.480
5.76
X
X
X
X
7/16″
0.650
7.80
X
X
X
X
1/2″
0.850
10.20
X
X
X
X
9/16″
1.080
12.96
X
X
X
X
5/8″
1.330
15.96
X
X
X
X
3/4″
1.910
22.92
X
X
X
X
7/8″
2.610
31.32
X
X
X
X
1″
3.400
40.80
X
X
X
X
1-1/8″
4.310
51.72
X
X
X
X
1-1/4″
5.320
63.84
X
X
X
X
1-3/8″
6.400
76.80
X
X
X
X
1-1/2″
7.600
91.20
X
X
X
X
1-3/4″
10.400
124.80
X
X
X
X
2″
13.600
163.20
X
X
X
X
2-1/4″
17.200
206.40
X
X
X
X
2-1/2″
21.300
255.60
X
X
X
X
3″
30.63
367.56
X
X
X
P
4″
54.40
652.80
X
X
X
P
PROCESSING:-
Customers can select a number of processing options to produce stainless steel bars to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
Long Product Processing Services Overview
Square Bar Cutting
Products cut include Round Bar, Flat bar, Hex bar, Square bar, Tubing and Hollow Bar, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter
Square Bar Production Cutting
Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Square Bar Polishing
Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes.
TOLERANCES FOR COLD AND HOT SQUARE BARS
COLD FINISHED SQUARE BAR TOLERANCES:
CF Tolerances
Plus
Minus
1/8″ to 5/16″ (exclusive)
0.000
0.002
5/16″ to 1/2″ (exclusive)
0.000
0.003
1/2″ to 1″ (inclusive)
0.000
0.004
over 1″ to 2″ (inclusive)
0.000
0.006
over 2″ to 3″ (inclusive)
0.000
0.008
COLD FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE BAR TOLERANCES:
HF Tolerances
Plus
Minus
Out of Sq
Over 7/8″ to 1″ (inclusive)
0.009
0.009
0.013
Over 1″ to 1-1/8″ (inclusive)
0.010
0.010
0.015
Over 1-1/8″ to 1-1/4″ (inclusive)
0.011
0.011
0.016
Over 1-1/4″ to 1-3/8″ (inclusive)
0.012
0.012
0.018
Over 1-3/8″ to 1-1/2″ (inclusive)
0.014
0.014
0.021
Over 1-1/2″ to 2″ (inclusive)
1/64
1/64
0.023
HOT FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE BAR SPECIFICATIONS:
Stainless Steel Square Bar Specifications
ASTM A276
This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.
ASTM A479
This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels.
ASTM A484
This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions.
ASTM A582
This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels.
ASTM B473
This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition.
We export our PRECIPITATION HARDENING STAINLESS STEEL 17-4PH SQUARE BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.