Leading Provider of

Stainless Steel

Opening Times

Mon - Sat: 7.00 - 18:00

Get in touch

enquiry@harshsteel.com

ASTM B649 Square Bars, ASME SB649 Square Bars, Stainless Steel 904L Square Bars Supplier, Manufacturer and Exporter in India


Din 1.4539 Stainless Steel 904L Square Bars, UNS N08904 Square Bars, Stainless Steel 904L Square Bars, Stainless Steel 904L Square Bars Suppliers in India.

AVAILABILITY:-

  • Seamless Pipe 1/2" W

SPECIFICATION:-

  • ASTM B677, B366
  • ASME SB677, SB366

DESCRIPTION:-

904L is a high-alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.


DESIGN FEATURES:-

  • Good resistance to pitting and crevice corrosion.
  • Very good resistance to stress corrosion cracking.
  • Good resistance to intergranular corrosion.
  • Good formability and weldability.
  • Maximum service temperatures of 450 deg.C. (824 deg.F).

TYPICAL APPLICATIONS:-

  • Production and transport of sulfuric acid
  • Metal pickling in sulfuric acid
  • Production and concentration of phosphoric acid
  • Use in seawater, brackish water, condensers, heat exchangers and pipe work in general
  • Paper and allied industries
  • Gas washing
  • Chemical and pharmaceutical industries

TENSILE REQUIREMENTS:-

  • Tensile Strength (KSI) 70
  • Yield Strength (KSI) 25
  • KSI can be converted to MPA (Megapascals) by multiplying by 6.895.

CHEMICAL COMPOSITION:-

C Cr Cu Mn Mo Ni P S Si
Max Max Max Max Max
0.02 19.0-23.0 1.0-2.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0

SQUARE BAR PRODUCT OVERVIEW:-

Stainless Steel Square Bar
Thickness Range of Stainless Plate 3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST)
Grades 202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available

INVENTORY:-

  • X = Stocked Item
  • P = Call For availability square bar can be cut to size.
  • Square bar can be polished per customer specifications.
  • Square bar is stocked in Penn met 2000 for improved machinability.
Size in Inches Wt per Ft Wt per 12′ 303 304/L 316/L 416
3/16″ 0.120 1.440 X X X P
1/4″ 0.210 2.52 X X X P
5/16″ 0.330 3.96 X X X X
3/8″ 0.480 5.76 X X X X
7/16″ 0.650 7.80 X X X X
1/2″ 0.850 10.20 X X X X
9/16″ 1.080 12.96 X X X X
5/8″ 1.330 15.96 X X X X
3/4″ 1.910 22.92 X X X X
7/8″ 2.610 31.32 X X X X
1″ 3.400 40.80 X X X X
1-1/8″ 4.310 51.72 X X X X
1-1/4″ 5.320 63.84 X X X X
1-3/8″ 6.400 76.80 X X X X
1-1/2″ 7.600 91.20 X X X X
1-3/4″ 10.400 124.80 X X X X
2″ 13.600 163.20 X X X X
2-1/4″ 17.200 206.40 X X X X
2-1/2″ 21.300 255.60 X X X X
3″ 30.63 367.56 X X X P
4″ 54.40 652.80 X X X P

PROCESSING:-

Customers can select a number of processing options to produce stainless steel bars to their exact specifications, reducing materiel costs, production time, scrap and internal handling.

Long Product Processing Services Overview
Square Bar Cutting Products cut include Round Bar, Flat bar, Hex bar, Square bar, Tubing and Hollow Bar, Pipe, Angles, channels, Beams and Tees.  Thickness range is 1/16″ to 28″ diameter
Square Bar Production Cutting Penn Stainless can provide production cutting for product diameters up to 4″.  We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Square Bar Polishing Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes.

TOLERANCES FOR COLD AND HOT SQUARE BARS

COLD FINISHED SQUARE BAR TOLERANCES:

CF Tolerances Plus Minus
1/8″ to 5/16″ (exclusive) 0.000 0.002
5/16″ to 1/2″ (exclusive) 0.000 0.003
1/2″ to 1″ (inclusive) 0.000 0.004
over 1″ to 2″ (inclusive) 0.000 0.006
over 2″ to 3″ (inclusive) 0.000 0.008

COLD FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:

CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)


HOT FINISHED SQUARE BAR TOLERANCES:

HF Tolerances Plus Minus Out of Sq
Over 7/8″ to 1″ (inclusive) 0.009 0.009 0.013
Over 1″ to 1-1/8″ (inclusive) 0.010 0.010 0.015
Over 1-1/8″ to 1-1/4″ (inclusive) 0.011 0.011 0.016
Over 1-1/4″ to 1-3/8″ (inclusive) 0.012 0.012 0.018
Over 1-3/8″ to 1-1/2″ (inclusive) 0.014 0.014 0.021
Over 1-1/2″ to 2″ (inclusive) 1/64 1/64 0.023

HOT FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:

HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)


STAINLESS STEEL SQUARE BAR SPECIFICATIONS:

Stainless Steel Square Bar Specifications
ASTM A276 This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.
ASTM A479 This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels.
ASTM A484 This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions.
ASTM A582  This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels.
ASTM B473  This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition.

We export our STAINLESS STEEL 904L SQUARE BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at harshsteel@ymail.com for your instant requirements.




Enquiry







OUR SUMMARY:
Reviewer :
Harsh steel
Review Date :
Reviewed Product :
STAINLESS STEEL 904L SQUARE BARS
Author Rating
5starstarstarstarstar