UNS S41000 Square Bars, SS 410 Square Bars, AISI SS 410 Stainless Steel 410 Square Bars Supplier, Manufacturer and Exporter in India
Din 1.4006 SS 410 Square Bars, SS UNS S41000 Square Bars, Stainless Steel 410 Square Rods, 410 Stainless Steel Cold Drawn Bars Suppliers in India.
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it's been hardened, tempered, and then polished.
APPLICATIONS:-
Applications requiring moderate corrosion resistance and high mechanical properties are ideal for Alloy 410. Examples of applications that frequently used Alloy 410 include:
Cutlery
Steam and gas turbine blades
Kitchen utensils
Bolts, nuts, screws
Pump and valve parts and shafts
Mine ladder rugs
Dental and surgical instruments
Nozzles
Hardened steel balls and seats for oil well pumps
CORROSION RESISTANCE:
Good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive environments
Its exposure to everyday activities (sports, food preparation) is generally satisfactory when proper cleaning is performed after exposure to use
Good corrosion resistance to low concentrations of mild organic and mineral acids
WELDING CHARACTERISTICS:
Readily welded by all standard methods
To reduce the risk of cracking, it is suggested to pre-heat the work piece to 350 to 400°F (177 to 204°C;)
Post weld annealing is recommended to retain maximum ductility
Heat Treatment
The proper hot work range is 2000 to 2200°F (1093 to 1204°C;)
Do not work this material below 1650oF (899°C;)
CHEMICAL PROPERTIES:-
C
Mn
Si
P
S
Cr
Ni
410
0.15 max
1.00 max
1.00 max
0.04 max
0.03 max
min: 11.5
max: 13.5
0.50 max
MECHANICAL PROPERTIES:
Grade
Tensile Strength ksi (MPa) min
Yield Strength 0.2% offset ksi (MPa) min
Elongation (% in 50mm) min
Hardness (Brinell) MAX
Hardness (Rockwell B) MAX
410
65 (450)
30 (205)
20
217
96
Mechanical Properties of Heat Treated 410:
Heat Treatment
T410 (0.14%C) Hardened 1800°F (982°C)
Rockwell Hardness
0.2% YS, Ksi (MPa)
UTS, Ksi (MPa)
Annealed*
81 HRB
45.4 (313)
80.4 (554)
Hardened & Tempered 400°F (204°C)
43 HRC
156.1 (1076)
202.9 (1399)
Hardened & Tempered 550°F (288°C)
40 HRC
148.3 (1022)
187.0 (1289)
Hardened & Tempered 600°F (316°C)
40 HRC
148.8 (1026)
186.1 (1283)
Hardened & Tempered 800°F (427°C)
41 HRC
132.9 (916)
188.5 (1300)
Hardened & Tempered 900°F (482°C)
41 HRC
122.6 (845)
154.3 (1063)
Hardened & Tempered 1000°F (538°C)
35 HRC
127.9 (882)
154.3 (1063)
Hardened & Tempered 1200°F (649°C)
98 HRB
85.5 (589)
111.2 (767)
PHYSICAL PROPERTIES:
Density
lbm/in3
Thermal Conductivity
(BTU/h ft. °F)
Electrical
Resistivity
(in x 10-6)
Modulus of
Elasticity
(psi x 106
Coefficient of
Thermal Expansion
(in/in)/
°F x 10-6
Specific Heat
(BTU/lb/
°F)
Melting
Range
(°F)
at 68°F: 0.276
14.4 at 212°F
56 at 68°F
29
5.90 at 68 – 392°F
0.11 at 68°F to 212°F
2700 to 2790
6.5 at 68 – 1112°F
SQUARE BAR PRODUCT OVERVIEW:-
Stainless Steel Square Bar
Thickness Range of Stainless Plate
3/16″ THRU 4″ (LARGER SIZES AVAILABLE UPON REQUEST)
Grades
202, 304/304L, 316/316L,304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
INVENTORY:-
X = Stocked Item
P = Call For availability square bar can be cut to size.
Square bar can be polished per customer specifications.
Square bar is stocked in Penn met 2000 for improved machinability.
Size in Inches
Wt per Ft
Wt per 12′
303
304/L
316/L
416
3/16″
0.120
1.440
X
X
X
P
1/4″
0.210
2.52
X
X
X
P
5/16″
0.330
3.96
X
X
X
X
3/8″
0.480
5.76
X
X
X
X
7/16″
0.650
7.80
X
X
X
X
1/2″
0.850
10.20
X
X
X
X
9/16″
1.080
12.96
X
X
X
X
5/8″
1.330
15.96
X
X
X
X
3/4″
1.910
22.92
X
X
X
X
7/8″
2.610
31.32
X
X
X
X
1″
3.400
40.80
X
X
X
X
1-1/8″
4.310
51.72
X
X
X
X
1-1/4″
5.320
63.84
X
X
X
X
1-3/8″
6.400
76.80
X
X
X
X
1-1/2″
7.600
91.20
X
X
X
X
1-3/4″
10.400
124.80
X
X
X
X
2″
13.600
163.20
X
X
X
X
2-1/4″
17.200
206.40
X
X
X
X
2-1/2″
21.300
255.60
X
X
X
X
3″
30.63
367.56
X
X
X
P
4″
54.40
652.80
X
X
X
P
PROCESSING:-
Customers can select a number of processing options to produce stainless steel bars to their exact specifications, reducing materiel costs, production time, scrap and internal handling.
Long Product Processing Services Overview
Square Bar Cutting
Products cut include Round Bar, Flat bar, Hex bar, Square bar, Tubing and Hollow Bar, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter
Square Bar Production Cutting
Penn Stainless can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Square Bar Polishing
Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes.
TOLERANCES FOR COLD AND HOT SQUARE BARS
COLD FINISHED SQUARE BAR TOLERANCES:
CF Tolerances
Plus
Minus
1/8″ to 5/16″ (exclusive)
0.000
0.002
5/16″ to 1/2″ (exclusive)
0.000
0.003
1/2″ to 1″ (inclusive)
0.000
0.004
over 1″ to 2″ (inclusive)
0.000
0.006
over 2″ to 3″ (inclusive)
0.000
0.008
COLD FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
CF: 1/16 inch in any 5 foot; but may not exceed 1/16 X (length in ft/5)
HOT FINISHED SQUARE BAR TOLERANCES:
HF Tolerances
Plus
Minus
Out of Sq
Over 7/8″ to 1″ (inclusive)
0.009
0.009
0.013
Over 1″ to 1-1/8″ (inclusive)
0.010
0.010
0.015
Over 1-1/8″ to 1-1/4″ (inclusive)
0.011
0.011
0.016
Over 1-1/4″ to 1-3/8″ (inclusive)
0.012
0.012
0.018
Over 1-3/8″ to 1-1/2″ (inclusive)
0.014
0.014
0.021
Over 1-1/2″ to 2″ (inclusive)
1/64
1/64
0.023
HOT FINISHED SQUARE BAR STRAIGHTNESS TOLERANCES:
HF: 1/8 inch in any 5 foot; but may not exceed 1/8 X (length in ft/5)
STAINLESS STEEL SQUARE BAR SPECIFICATIONS:
Stainless Steel Square Bar Specifications
ASTM A276
This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.
ASTM A479
This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels.
ASTM A484
This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions.
ASTM A582
This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels.
ASTM B473
This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition.
We export our STAINLESS STEEL 410 SQUARE BARS products to Western and Eastern Europe, Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia etc. We are sure that we also can cover the requirements requested by your company you can email us at
harshsteel@ymail.com for your instant requirements.